ESAB Wire Feeders TWECO ULTRAFEED VAF-4HD

0,00 Rp 0.0 IDR

0,00 Rp

Produk tidak tersedia

Tambah ke Troli

Tweco Roto-Ground is a highly efficient device for grounding weldments while being rotated on turning rolls or positioners .


Jaminan 30-hari uang kembali
Gratis pengiriman di U.S.
Beli sekarang, dapatkan dalam 2 hari.

0

Deskripsi Produk :

Tweco Roto-Ground is a highly efficient device for grounding weldments while being rotated on turning rolls or positioners . The 2" shaft shoulders up to the steel nut which the user welds to his rotating work or fixture. Tweco Roto-Grounds have no brushes, springs or mercury. A simple adjusting bolt provides maximum efficiency.

Features :

  • Process Capability: MIG (GMAW), Flux Cored (FCAW)

  • Advanced Adjustable Features for Optimum Welding Performance; Preflow, Run In, Ramp Time, Postflow, Burnback, Crater Control, Spot & Stitch.

  • Heavy Duty 4 Roll Drive System for superior wire feeding

  • Digital Meters: Voltage and Amperage/WFS; Preview and Hold capability.

  • Trigger & Spot Control: 4T (Latch) eliminates operator fatigue, spot welding capability.

  • Weld Schedules: Allows operator to store two optimized welding parameters then digitally recall them with perfect repeatability.

  • Inch & Purge Buttons for advancing wire or purging shielding gas.

  • Circuit Breaker Protection: No fuses required.

  • Indicator Lights to identify power and faults; plus control settings over amps and wire feed speed for IPM or MPM.

Other Features:

  • Robust heavy duty rear spool and coil mounting with lifting eye.

  • Heavy duty base with no slip feet.

  • Standard Tweco No. 4 welding gun quick disconnect.

  • Large 1-5/8" diameter drive rolls. (VAF-4HD)

Welding Process :

  • FCAW - Flux Core Arc Welding

  • GMAW (MIG/MAG - Metal Inert Gas / Metal Active Gas)

Arc Power Specifications :

  • Model : ULTRAFEED VAF-4 & ULTRAFEED VAF-4HD

  • Conditional Statement : Input Voltage Primary Current

  • Duty Cycle : 60 % & 100 %

  • Input Current : 42 A

  • Input Frequency : 50/60 Hz

  • Input VAC : 115 VAC

  • Output Current : [450 A & 350 A] & [550 A 450 A]

  • Phase : 1ph

Input Voltage :

  • Frequency : 50/60 Hz

  • Phase : 1

  • Voltage : 115 V

Specifications :

  • Burnback Time : 0-1 sec

  • Gas post flow : 0-30 sec

  • Gas pre flow : 0-5.0 sec

  • Maximum Pressure : 100 psig (7 bar)

  • MCableX : 19 Pin

  • Spot Weld Time : 0-20 sec

  • Standards : IEC 60974-1, CSA E60974-1, UL 60974-1

Welding Output :

  • Model : Duty Cycle & Output Current

  • ULTRAFEED VAF-4 : 60 % & 450 A

  • ULTRAFEED VAF-4 : 100 % & 350 A

  • ULTRAFEED VAF-4HD : 60 % & 550 A

  • ULTRAFEED VAF-4HD : 100 % & 450 A

Specifications for ESAB Wire Feeders TWECO ULTRAFEED VAF-4HD

Model ULTRAFEED VAF-4 or ULTRAFEED VAF-4HD

Leave a comment

You must be logged in to post a comment.