Nikko Steel Kawat Las Elektroda RD-16C (MMA Electrodes For High Tensile Low Alloy Steels)

0,00 Rp 0.0 IDR

0,00 Rp

Produk tidak tersedia

Tambah ke Troli

C-Mn and low alloy steel plate, pipe forgings and castings used extensively for service at cryogenic temperatures, eg: LT50.
BS 1501-224 Grade 490B Plate.
ASTM A333 Grade 6 Pipe.


Jaminan 30-hari uang kembali
Gratis pengiriman di U.S.
Beli sekarang, dapatkan dalam 2 hari.

0

Product Description :

Impacts down to -70 C.

The design emphasis of the chemically basic flux is engineered to ensure the

optimum weld metal properties demanded by the specification are fully met.

The basic flux containing the appropriate alloying elements but minimal iron

powder, is extruded onto a high purity ferritic core wire and bound with a blend of

silicates that ensure both coating strength and a coating resistant to subsequent

moisture absorption.

Welding Features Of The Electrode :

The chemical nature of the flux together with its controlled coating factor allows

the electrode to be used at relatively low amps. This factor together with the fairly

fluid but quick freezing slag facilitate vertical up welding including controlled

penetration root runs.

Overall the arc is very stable, slag detachability is good, fillet welds are slightly

convex and metal recovery is some 98% with respect to weight of the core wire.

Application And Materials To Be Welded :

  • C-Mn and low alloy steel plate, pipe forgings and castings used extensively for service at cryogenic temperatures, eg: LT50.

  • BS 1501-224 Grade 490B Plate.

  • ASTM A333 Grade 6 Pipe.

  • ASTM A350 Grades LF1/LF2 Forgings.

  • ASTM A352 Grade LC2 Castings.

  • Maximum stress relief temperatures should be 620 C.

Specifications for Nikko Steel Kawat Las Elektroda RD-16C (MMA Electrodes For High Tensile Low Alloy Steels)

Uk. Elektroda 2.6 mm or 3.2 mm or 4.0 mm or 5.0 mm

Leave a comment

You must be logged in to post a comment.