Comac Scrubber Antea - Made in Italy

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

Post comment with email address (confirmation of email is required in order to publish comment on website) or please login to post comment

5. PROPER DAILY MAINTENANCE KEEPS CLEANING PERFORMANCES CONSTANT OVER TIME Yellow color-code identifies the parts involved in daily maintenance. At the end of the shift the operator can easily and quickly find what parts have to be sanitized, without wasting time DAILY MAINTENANCE FAST FILL A simple device allows the quick filling of the tank with clean water without the presence of the operator (upon request) The large diameter of the drain hose allows to quickly empty the recovery tank To ensure a perfect drying, the suction hose and the squeegee rubber blades must be cleaned at the end of any cleaning operation. The squeegee can be lifted to quickly clean the rubber blades KIT FOR CLEANING ACCESSORIES For bringing additional cleaning tools with you, which are useful for completing the operations (upon request) Rubber blades replacement or rotation are carried out in few seconds without any tools TOOL-HOLDER HOOK It can hold the squeegee, the brush or the tank lid, useful for machine store or maintenance (upon request) Full access to components makes easier both regular and extraordinary maintenance ELASTIC NET The elastic net can hold additional cleaning products that allows to complete the cleaning task (upon request) The scrubbing-sweeping version (Antea 50 BTS) is equipped with a debris hopper that can be easily emptied taking it out from the right side For an effective vacuuming the suction filter must be kept clean Solution filter cleaning The tools that will save your time CERTIFICATIONS OPTIONAL Antea 50E Antea 50B Antea 50BT Antea 50BTS Antea 50BTO CB (On-board Battery Charger) - • • • • CDS (Comac Dosing System) - - • • • CFC (Comac Fleet Care) - - • • • CCP (Comac Corrosion Protection) • • • • • Fast filling system • • • • • Tool-holder hook • • • • • Kit for cleaning accessories • • • • • Antibacterial tanks • • • • • Easy Clean • • • • • Elastic net as object holder • • • • • TECHNICAL DESCRIPTION Antea 50E Antea 50B Antea 50BT Antea 50BTS Antea 50BTO Solution tank l/gal 40/10,6 40/10,6 40/10,6 40/10,6 40/10,6 Recovery tank l/gal 60/15,9 60/15,9 60/15,9 60/15,9 60/15,9 Detergent tank capacity (CDS) l/gal - - 3/0,8 3/0,8 3/0,8 Voltage and nominal power V/W 220/825 - 110/825 24/920 24/1100 25/1200 24/1000 Working width mm/inch 508/20 508/20 508/20 500/19,7 508/20 Squeegee width mm/inch 700/27,5 700/27,5 700/27,5 700/27,5 700/27,5 Working capacity up to sq.m/h/sqft/h 1250/13455 1250/13455 1780/19160 1750/18837 1780/19160 Disc brush (n.) mm/inch (1) 508/20 (1) 508/20 (1) 508/20 - - Cylindircal brushes (n.) mm/inch - - - (2) 110x500/4,3x19,7 - Debris hopper capacity l/gal - - - 4/1,06 - Rectangular pad (n.) mm/inch - - - - (1) 355x508 Brush pressure Kg/lbs 23/50,7 23/50,7 23/50,7 25/55 25/55 Brush motor V/W 220/375 - 110/375 24/500 24/500 24/600 24/400 Brush revolution/orbital rpm 140 140 140 700 2300 Vacuum motor V/W 220/450 - 110/450 24/420 24/420 24/420 24/420 Suction vacuum mbar 121,5 124 124 124 124 Traction - Semi aut. Semi aut. aut. aut. aut. Traction motor V/W - - 24/180 24/180 24/180 Forward speed Km/h 3 3 0÷3,5 0÷3,5 0÷3,5 Battery compartment dimensions (Lxhxw) mm/inch - 350x285x355/ 13,7x11,2x13,9 350x285x355/ 13,7x11,2x13,9 350x285x355/ 13,7x11,2x13,9 350x285x355/ 13,7x11,2x13,9 Max gradient at full load % 2 2 10 10 10 Batteries (n.) V/Ah C5 - Gel 12/112 (2) Wet 12/110 (2) Gel 12/112 (2) Wet 12/110 (2) Gel 12/112 (2) Wet 12/110 (2) Gel 12/112 (2) Wet 12/110 (2) Batteries weight Kg/lbs - 76/167,5 76/167,5 76/167,5 76/167,5 Machine dimensions (Lxhxw) mm/inch 1177x992x591/ 46,3x39x23,3 1177x992x591/ 46,3x39x23,3 1177x1009x591/ 46,3x39,7x23,3 1156x1009x612/ 45,5x39,7x24 1071x1009x591/ 42,1x39,7x23,3 Machine weight (without batteries) Kg/lbs 80/176,4 80/176,4 87/191,8 90/198,4 89/196,2 STANDARD EQUIPMENTS Antea 50E Antea 50B Antea 50BT Antea 50BTS Antea 50BTO Comfort Hour meter • • • • • Eco Mode - - • • • Electronic control panel with diagnostics - - • • • Brush head lifting Manual Manual Manual Manual Manual Automatic brush uncoupling - • • - - Ergonomic squeegee handle • • • • • Speed adjustment - - • • • Squeegee rubber blades usable on 4 sides • • • • • Color-coded parts for easy maintenance • • • • • Accessory holder on the tank lid • • • • • Flexible filling hose with drop-stop • • • • • Water level indicator • • • • • Safety Emergency stop - - • • • Automatic parking brake - - • • • Antiskid wheels • • • • • Die-caste aluminum frame • • • • • COMAC S.p.A. Via Maestri del Lavoro, 13 - 37059 Santa Maria di Zevio - Verona - ITALY Tel. 045 8774222 - Fax 045 8750303 - www.comac.it - com@comac.it Organisation certified by Q.C.B. Italia ISO 9001:2008, ISO 14001:2015, OHSAS 18001:2007 COMAC Spa reserves the right, at anytime, to make technical and/or equipment modifications without prior notification. The images are shown as reference only and are not binding as to the actual design and/or equipment. - COD. 302181 - AD - 01/18 - Copyright © COMAC 2018

6. PROPER DAILY MAINTENANCE KEEPS CLEANING PERFORMANCES CONSTANT OVER TIME Yellow color-code identifies the parts involved in daily maintenance. At the end of the shift the operator can easily and quickly find what parts have to be sanitized, without wasting time DAILY MAINTENANCE FAST FILL A simple device allows the quick filling of the tank with clean water without the presence of the operator (upon request) The large diameter of the drain hose allows to quickly empty the recovery tank To ensure a perfect drying, the suction hose and the squeegee rubber blades must be cleaned at the end of any cleaning operation. The squeegee can be lifted to quickly clean the rubber blades KIT FOR CLEANING ACCESSORIES For bringing additional cleaning tools with you, which are useful for completing the operations (upon request) Rubber blades replacement or rotation are carried out in few seconds without any tools TOOL-HOLDER HOOK It can hold the squeegee, the brush or the tank lid, useful for machine store or maintenance (upon request) Full access to components makes easier both regular and extraordinary maintenance ELASTIC NET The elastic net can hold additional cleaning products that allows to complete the cleaning task (upon request) The scrubbing-sweeping version (Antea 50 BTS) is equipped with a debris hopper that can be easily emptied taking it out from the right side For an effective vacuuming the suction filter must be kept clean Solution filter cleaning The tools that will save your time CERTIFICATIONS OPTIONAL Antea 50E Antea 50B Antea 50BT Antea 50BTS Antea 50BTO CB (On-board Battery Charger) - • • • • CDS (Comac Dosing System) - - • • • CFC (Comac Fleet Care) - - • • • CCP (Comac Corrosion Protection) • • • • • Fast filling system • • • • • Tool-holder hook • • • • • Kit for cleaning accessories • • • • • Antibacterial tanks • • • • • Easy Clean • • • • • Elastic net as object holder • • • • • TECHNICAL DESCRIPTION Antea 50E Antea 50B Antea 50BT Antea 50BTS Antea 50BTO Solution tank l/gal 40/10,6 40/10,6 40/10,6 40/10,6 40/10,6 Recovery tank l/gal 60/15,9 60/15,9 60/15,9 60/15,9 60/15,9 Detergent tank capacity (CDS) l/gal - - 3/0,8 3/0,8 3/0,8 Voltage and nominal power V/W 220/825 - 110/825 24/920 24/1100 25/1200 24/1000 Working width mm/inch 508/20 508/20 508/20 500/19,7 508/20 Squeegee width mm/inch 700/27,5 700/27,5 700/27,5 700/27,5 700/27,5 Working capacity up to sq.m/h/sqft/h 1250/13455 1250/13455 1780/19160 1750/18837 1780/19160 Disc brush (n.) mm/inch (1) 508/20 (1) 508/20 (1) 508/20 - - Cylindircal brushes (n.) mm/inch - - - (2) 110x500/4,3x19,7 - Debris hopper capacity l/gal - - - 4/1,06 - Rectangular pad (n.) mm/inch - - - - (1) 355x508 Brush pressure Kg/lbs 23/50,7 23/50,7 23/50,7 25/55 25/55 Brush motor V/W 220/375 - 110/375 24/500 24/500 24/600 24/400 Brush revolution/orbital rpm 140 140 140 700 2300 Vacuum motor V/W 220/450 - 110/450 24/420 24/420 24/420 24/420 Suction vacuum mbar 121,5 124 124 124 124 Traction - Semi aut. Semi aut. aut. aut. aut. Traction motor V/W - - 24/180 24/180 24/180 Forward speed Km/h 3 3 0÷3,5 0÷3,5 0÷3,5 Battery compartment dimensions (Lxhxw) mm/inch - 350x285x355/ 13,7x11,2x13,9 350x285x355/ 13,7x11,2x13,9 350x285x355/ 13,7x11,2x13,9 350x285x355/ 13,7x11,2x13,9 Max gradient at full load % 2 2 10 10 10 Batteries (n.) V/Ah C5 - Gel 12/112 (2) Wet 12/110 (2) Gel 12/112 (2) Wet 12/110 (2) Gel 12/112 (2) Wet 12/110 (2) Gel 12/112 (2) Wet 12/110 (2) Batteries weight Kg/lbs - 76/167,5 76/167,5 76/167,5 76/167,5 Machine dimensions (Lxhxw) mm/inch 1177x992x591/ 46,3x39x23,3 1177x992x591/ 46,3x39x23,3 1177x1009x591/ 46,3x39,7x23,3 1156x1009x612/ 45,5x39,7x24 1071x1009x591/ 42,1x39,7x23,3 Machine weight (without batteries) Kg/lbs 80/176,4 80/176,4 87/191,8 90/198,4 89/196,2 STANDARD EQUIPMENTS Antea 50E Antea 50B Antea 50BT Antea 50BTS Antea 50BTO Comfort Hour meter • • • • • Eco Mode - - • • • Electronic control panel with diagnostics - - • • • Brush head lifting Manual Manual Manual Manual Manual Automatic brush uncoupling - • • - - Ergonomic squeegee handle • • • • • Speed adjustment - - • • • Squeegee rubber blades usable on 4 sides • • • • • Color-coded parts for easy maintenance • • • • • Accessory holder on the tank lid • • • • • Flexible filling hose with drop-stop • • • • • Water level indicator • • • • • Safety Emergency stop - - • • • Automatic parking brake - - • • • Antiskid wheels • • • • • Die-caste aluminum frame • • • • • COMAC S.p.A. Via Maestri del Lavoro, 13 - 37059 Santa Maria di Zevio - Verona - ITALY Tel. 045 8774222 - Fax 045 8750303 - www.comac.it - com@comac.it Organisation certified by Q.C.B. Italia ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007 COMAC Spa reserves the right, at anytime, to make technical and/or equipment modifications without prior notification. The images are shown as reference only and are not binding as to the actual design and/or equipment. - COD. 302181 - AD - 01/18 - Copyright © COMAC 2018

1. PROPER DAILY MAINTENANCE KEEPS CLEANING PERFORMANCES CONSTANT OVER TIME Yellow color-code identifies the parts involved in daily maintenance. At the end of the shift the operator can easily and quickly find what parts have to be sanitized, without wasting time DAILY MAINTENANCE FAST FILL A simple device allows the quick filling of the tank with clean water without the presence of the operator (upon request) The large diameter of the drain hose allows to quickly empty the recovery tank To ensure a perfect drying, the suction hose and the squeegee rubber blades must be cleaned at the end of any cleaning operation. The squeegee can be lifted to quickly clean the rubber blades KIT FOR CLEANING ACCESSORIES For bringing additional cleaning tools with you, which are useful for completing the operations (upon request) Rubber blades replacement or rotation are carried out in few seconds without any tools TOOL-HOLDER HOOK It can hold the squeegee, the brush or the tank lid, useful for machine store or maintenance (upon request) Full access to components makes easier both regular and extraordinary maintenance ELASTIC NET The elastic net can hold additional cleaning products that allows to complete the cleaning task (upon request) The scrubbing-sweeping version (Antea 50 BTS) is equipped with a debris hopper that can be easily emptied taking it out from the right side For an effective vacuuming the suction filter must be kept clean Solution filter cleaning The tools that will save your time CERTIFICATIONS OPTIONAL Antea 50E Antea 50B Antea 50BT Antea 50BTS Antea 50BTO CB (On-board Battery Charger) - • • • • CDS (Comac Dosing System) - - • • • CFC (Comac Fleet Care) - - • • • CCP (Comac Corrosion Protection) • • • • • Fast filling system • • • • • Tool-holder hook • • • • • Kit for cleaning accessories • • • • • Antibacterial tanks • • • • • Easy Clean • • • • • Elastic net as object holder • • • • • TECHNICAL DESCRIPTION Antea 50E Antea 50B Antea 50BT Antea 50BTS Antea 50BTO Solution tank l/gal 40/10,6 40/10,6 40/10,6 40/10,6 40/10,6 Recovery tank l/gal 60/15,9 60/15,9 60/15,9 60/15,9 60/15,9 Detergent tank capacity (CDS) l/gal - - 3/0,8 3/0,8 3/0,8 Voltage and nominal power V/W 220/825 - 110/825 24/920 24/1100 25/1200 24/1000 Working width mm/inch 508/20 508/20 508/20 500/19,7 508/20 Squeegee width mm/inch 700/27,5 700/27,5 700/27,5 700/27,5 700/27,5 Working capacity up to sq.m/h/sqft/h 1250/13455 1250/13455 1780/19160 1750/18837 1780/19160 Disc brush (n.) mm/inch (1) 508/20 (1) 508/20 (1) 508/20 - - Cylindircal brushes (n.) mm/inch - - - (2) 110x500/4,3x19,7 - Debris hopper capacity l/gal - - - 4/1,06 - Rectangular pad (n.) mm/inch - - - - (1) 355x508 Brush pressure Kg/lbs 23/50,7 23/50,7 23/50,7 25/55 25/55 Brush motor V/W 220/375 - 110/375 24/500 24/500 24/600 24/400 Brush revolution/orbital rpm 140 140 140 700 2300 Vacuum motor V/W 220/450 - 110/450 24/420 24/420 24/420 24/420 Suction vacuum mbar 121,5 124 124 124 124 Traction - Semi aut. Semi aut. aut. aut. aut. Traction motor V/W - - 24/180 24/180 24/180 Forward speed Km/h 3 3 0÷3,5 0÷3,5 0÷3,5 Battery compartment dimensions (Lxhxw) mm/inch - 350x285x355/ 13,7x11,2x13,9 350x285x355/ 13,7x11,2x13,9 350x285x355/ 13,7x11,2x13,9 350x285x355/ 13,7x11,2x13,9 Max gradient at full load % 2 2 10 10 10 Batteries (n.) V/Ah C5 - Gel 12/112 (2) Wet 12/110 (2) Gel 12/112 (2) Wet 12/110 (2) Gel 12/112 (2) Wet 12/110 (2) Gel 12/112 (2) Wet 12/110 (2) Batteries weight Kg/lbs - 76/167,5 76/167,5 76/167,5 76/167,5 Machine dimensions (Lxhxw) mm/inch 1177x992x591/ 46,3x39x23,3 1177x992x591/ 46,3x39x23,3 1177x1009x591/ 46,3x39,7x23,3 1156x1009x612/ 45,5x39,7x24 1071x1009x591/ 42,1x39,7x23,3 Machine weight (without batteries) Kg/lbs 80/176,4 80/176,4 87/191,8 90/198,4 89/196,2 STANDARD EQUIPMENTS Antea 50E Antea 50B Antea 50BT Antea 50BTS Antea 50BTO Comfort Hour meter • • • • • Eco Mode - - • • • Electronic control panel with diagnostics - - • • • Brush head lifting Manual Manual Manual Manual Manual Automatic brush uncoupling - • • - - Ergonomic squeegee handle • • • • • Speed adjustment - - • • • Squeegee rubber blades usable on 4 sides • • • • • Color-coded parts for easy maintenance • • • • • Accessory holder on the tank lid • • • • • Flexible filling hose with drop-stop • • • • • Water level indicator • • • • • Safety Emergency stop - - • • • Automatic parking brake - - • • • Antiskid wheels • • • • • Die-caste aluminum frame • • • • • COMAC S.p.A. Via Maestri del Lavoro, 13 - 37059 Santa Maria di Zevio - Verona - ITALY Tel. 045 8774222 - Fax 045 8750303 - www.comac.it - com@comac.it Organisation certified by Q.C.B. Italia ISO 9001:2008, ISO 14001:2015, OHSAS 18001:2007 COMAC Spa reserves the right, at anytime, to make technical and/or equipment modifications without prior notification. The images are shown as reference only and are not binding as to the actual design and/or equipment. - COD. 302181 - AD - 01/18 - Copyright © COMAC 2018

3. C O R R O S I O N P R O T E C T I O N CDS - COMAC DOSING SYSTEM Separate water and detergent management Antea can be equipped upon request with CDS (Comac Dosing System) for the separate management of water and detergent, that allows to increase or reduce their flow, according to the type of dirt to clean, thus avoiding wastes. It reduces cleaning solution consumption by up to 50%. ECO DEVICE Only one button to reduce energy consumption and noise level. It is an ideal working setting for maintenance cleaning and to use the machine in sensitive or frequented environments. The simple control panel of Antea 50 E/B favours an intuitive use. The traction versions feature more functions such as the Eco device to reduce consumption and the knob for speed adjustment. CFC - COMAC FLEET CARE Antea can be arranged with the equipment needed for fleet management through Comac Fleet Care (CFC). Such system allows the remote control of machines status: if, when and where each machine is operating or if maintenance is needed, to let you promptly intervene avoiding machine downtimes and unexpected costs for extraordinary maintenance. Antea is a walk behind scrubbing machine offering high performances for both maintenance and heavy duty cleaning of floors up to 2200 sq.m. It is available with a disc brush with 50 cm working width, cable (E) or battery powered, with traction (BT) or without it (B). Moreover, they come with traction also the scrubbing-sweeping version with 2 cylindrical brushes (BTS) and the new orbital version (BTO). Antea stands out for its new design that provides reliability and sturdiness. Such qualities are granted also by innovative choices, like the use of a pressure die-cast aluminum squeegee mount, machine frame and brush head. The operator will find the machine very easy to use and to manoeuvre. Its compact size makes it an ideal model for several sectors: healthcare, hospitality, large-scale retailing, automotive and public institutes. THE ADVANTAGES OF ANTEA Many are the benefits Antea can offer: • Intuitive drive, with few and easy controls • Versatility, thanks to the compact size it is ideal to meet the cleaning needs of several sectors • Full accessibility to components for easier maintenance • Energy saving and silent operation < 66 dB (A), thanks to Eco device (traction versions) • Control of water and detergent consumption with CDS system (optional, only traction versions) • Reliability over time and sturdiness are guaranteed by the new design and the new pressure die-cast aluminum frame • Easy Clean: special treatment that prevents dirt from sticking on the surface, making easier tank cleaning and sanitizing (upon request) • Antibacterial tanks, available on request, ideal for the healthcare industry • Corrosion Protection: special treatment for metal surfaces of machines working in special environments such as swimming pools, ish markets, dairies, etc., and in all areas where corrosive agents can be found. Designed to help even unskilled operators Robust and reliable design, built to last USE: DETAILS THAT GUARANTEE RELIABILITY OVER TIME HOW TO START. SOLUTIONS TO PROPERLY DOSE THE DETERGENT ALL FUNCTIONS AT A GLANCE The hose for the solution tank filling can be connected directly to any water tap, giving the possibility to supply the machine everywhere The emergency button allows to immediately stop the machine in case of emergency (traction versions) The tank level is always under control, thanks to an indicator that results useful when filling the tank with water and during work, to know when you need to stop to empty the recovery tank The 4 wheels increase stability and manoeuvrability. Moreover, they make brush maintenance easier and allow to store the machine with the brush head up, to keep the brush in perfect conditions The recovery tank lid can hold small objects The on board battery charger makes recharging easier and quicker REFERENCE SECTORS MODELS ANTEA’S TECHNOLOGIES ANTEA 50 E/B/BT Scrubbing version with disc brush ANTEA 50 BTS Sweeping version with two cylindrical brushes ANTEA 50 BTO Orbital version with pad The chain to lower the squeegee is robust, made of steel, and equipped with an ergonomic handle, made out of die-cast aluminum The brush head is lowered/lifted through a comfortable pedal The frame, the squeegee mount and the brush head are made out of die-cast aluminum, that makes them robust and shock proof The brush can be easily adjusted without any tools to clean any type of floor Control panel of E version Control panel of B version Control panel of traction versions Cleaning companies Health Public Horeca Sports Automotive Handicraft Retail Transport Large-Scale Retail Trade

4. C O R R O S I O N P R O T E C T I O N CDS - COMAC DOSING SYSTEM Separate water and detergent management Antea can be equipped upon request with CDS (Comac Dosing System) for the separate management of water and detergent, that allows to increase or reduce their flow, according to the type of dirt to clean, thus avoiding wastes. It reduces cleaning solution consumption by up to 50%. ECO DEVICE Only one button to reduce energy consumption and noise level. It is an ideal working setting for maintenance cleaning and to use the machine in sensitive or frequented environments. The simple control panel of Antea 50 E/B favours an intuitive use. The traction versions feature more functions such as the Eco device to reduce consumption and the knob for speed adjustment. CFC - COMAC FLEET CARE Antea can be arranged with the equipment needed for fleet management through Comac Fleet Care (CFC). Such system allows the remote control of machines status: if, when and where each machine is operating or if maintenance is needed, to let you promptly intervene avoiding machine downtimes and unexpected costs for extraordinary maintenance. Antea is a walk behind scrubbing machine offering high performances for both maintenance and heavy duty cleaning of floors up to 2200 sq.m. It is available with a disc brush with 50 cm working width, cable (E) or battery powered, with traction (BT) or without it (B). Moreover, they come with traction also the scrubbing-sweeping version with 2 cylindrical brushes (BTS) and the new orbital version (BTO). Antea stands out for its new design that provides reliability and sturdiness. Such qualities are granted also by innovative choices, like the use of a pressure die-cast aluminum squeegee mount, machine frame and brush head. The operator will find the machine very easy to use and to manoeuvre. Its compact size makes it an ideal model for several sectors: healthcare, hospitality, large-scale retailing, automotive and public institutes. THE ADVANTAGES OF ANTEA Many are the benefits Antea can offer: • Intuitive drive, with few and easy controls • Versatility, thanks to the compact size it is ideal to meet the cleaning needs of several sectors • Full accessibility to components for easier maintenance • Energy saving and silent operation < 66 dB (A), thanks to Eco device (traction versions) • Control of water and detergent consumption with CDS system (optional, only traction versions) • Reliability over time and sturdiness are guaranteed by the new design and the new pressure die-cast aluminum frame • Easy Clean: special treatment that prevents dirt from sticking on the surface, making easier tank cleaning and sanitizing (upon request) • Antibacterial tanks, available on request, ideal for the healthcare industry • Corrosion Protection: special treatment for metal surfaces of machines working in special environments such as swimming pools, ish markets, dairies, etc., and in all areas where corrosive agents can be found. Designed to help even unskilled operators Robust and reliable design, built to last USE: DETAILS THAT GUARANTEE RELIABILITY OVER TIME HOW TO START. SOLUTIONS TO PROPERLY DOSE THE DETERGENT ALL FUNCTIONS AT A GLANCE The hose for the solution tank filling can be connected directly to any water tap, giving the possibility to supply the machine everywhere The emergency button allows to immediately stop the machine in case of emergency (traction versions) The tank level is always under control, thanks to an indicator that results useful when filling the tank with water and during work, to know when you need to stop to empty the recovery tank The 4 wheels increase stability and manoeuvrability. Moreover, they make brush maintenance easier and allow to store the machine with the brush head up, to keep the brush in perfect conditions The recovery tank lid can hold small objects The on board battery charger makes recharging easier and quicker REFERENCE SECTORS MODELS ANTEA’S TECHNOLOGIES ANTEA 50 E/B/BT Scrubbing version with disc brush ANTEA 50 BTS Sweeping version with two cylindrical brushes ANTEA 50 BTO Orbital version with pad The chain to lower the squeegee is robust, made of steel, and equipped with an ergonomic handle, made out of die-cast aluminum The brush head is lowered/lifted through a comfortable pedal The frame, the squeegee mount and the brush head are made out of die-cast aluminum, that makes them robust and shock proof The brush can be easily adjusted without any tools to clean any type of floor Control panel of E version Control panel of B version Control panel of traction versions Cleaning companies Health Public Horeca Sports Automotive Handicraft Retail Transport Large-Scale Retail Trade

2. C O R R O S I O N P R O T E C T I O N CDS - COMAC DOSING SYSTEM Separate water and detergent management Antea can be equipped upon request with CDS (Comac Dosing System) for the separate management of water and detergent, that allows to increase or reduce their flow, according to the type of dirt to clean, thus avoiding wastes. It reduces cleaning solution consumption by up to 50%. ECO DEVICE Only one button to reduce energy consumption and noise level. It is an ideal working setting for maintenance cleaning and to use the machine in sensitive or frequented environments. The simple control panel of Antea 50 E/B favours an intuitive use. The traction versions feature more functions such as the Eco device to reduce consumption and the knob for speed adjustment. CFC - COMAC FLEET CARE Antea can be arranged with the equipment needed for fleet management through Comac Fleet Care (CFC). Such system allows the remote control of machines status: if, when and where each machine is operating or if maintenance is needed, to let you promptly intervene avoiding machine downtimes and unexpected costs for extraordinary maintenance. Antea is a walk behind scrubbing machine offering high performances for both maintenance and heavy duty cleaning of floors up to 2200 sq.m. It is available with a disc brush with 50 cm working width, cable (E) or battery powered, with traction (BT) or without it (B). Moreover, they come with traction also the scrubbing-sweeping version with 2 cylindrical brushes (BTS) and the new orbital version (BTO). Antea stands out for its new design that provides reliability and sturdiness. Such qualities are granted also by innovative choices, like the use of a pressure die-cast aluminum squeegee mount, machine frame and brush head. The operator will find the machine very easy to use and to manoeuvre. Its compact size makes it an ideal model for several sectors: healthcare, hospitality, large-scale retailing, automotive and public institutes. THE ADVANTAGES OF ANTEA Many are the benefits Antea can offer: • Intuitive drive, with few and easy controls • Versatility, thanks to the compact size it is ideal to meet the cleaning needs of several sectors • Full accessibility to components for easier maintenance • Energy saving and silent operation < 66 dB (A), thanks to Eco device (traction versions) • Control of water and detergent consumption with CDS system (optional, only traction versions) • Reliability over time and sturdiness are guaranteed by the new design and the new pressure die-cast aluminum frame • Easy Clean: special treatment that prevents dirt from sticking on the surface, making easier tank cleaning and sanitizing (upon request) • Antibacterial tanks, available on request, ideal for the healthcare industry • Corrosion Protection: special treatment for metal surfaces of machines working in special environments such as swimming pools, ish markets, dairies, etc., and in all areas where corrosive agents can be found. Designed to help even unskilled operators Robust and reliable design, built to last USE: DETAILS THAT GUARANTEE RELIABILITY OVER TIME HOW TO START. SOLUTIONS TO PROPERLY DOSE THE DETERGENT ALL FUNCTIONS AT A GLANCE The hose for the solution tank filling can be connected directly to any water tap, giving the possibility to supply the machine everywhere The emergency button allows to immediately stop the machine in case of emergency (traction versions) The tank level is always under control, thanks to an indicator that results useful when filling the tank with water and during work, to know when you need to stop to empty the recovery tank The 4 wheels increase stability and manoeuvrability. Moreover, they make brush maintenance easier and allow to store the machine with the brush head up, to keep the brush in perfect conditions The recovery tank lid can hold small objects The on board battery charger makes recharging easier and quicker REFERENCE SECTORS MODELS ANTEA’S TECHNOLOGIES ANTEA 50 E/B/BT Scrubbing version with disc brush ANTEA 50 BTS Sweeping version with two cylindrical brushes ANTEA 50 BTO Orbital version with pad The chain to lower the squeegee is robust, made of steel, and equipped with an ergonomic handle, made out of die-cast aluminum The brush head is lowered/lifted through a comfortable pedal The frame, the squeegee mount and the brush head are made out of die-cast aluminum, that makes them robust and shock proof The brush can be easily adjusted without any tools to clean any type of floor Control panel of E version Control panel of B version Control panel of traction versions Cleaning companies Health Public Horeca Sports Automotive Handicraft Retail Transport Large-Scale Retail Trade

Dilihat

  • 240 Total Views
  • 181 Website Views
  • 59 Embeded Views

Tindakan

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Embeds 3

  • 12 indoteknikcom.odoo.com
  • 1 sentral.indoteknik.com
  • 9 indoteknik.com