Katalog Utama Lavor Pro 2018

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

Post comment with email address (confirmation of email is required in order to publish comment on website) or please login to post comment

2.

1. Main catalogue 2018/19

7. 7 Industrial vacuum cleaners Walk-behind floor scrubber driers Ride-on floor scrubber driers Walk-behind sweepers Steam generators Chemicals & sprayers Page 70 Page 76 Page 98 Page 110 Page 118 Page 136 TABLE OF CONTENTS

8. 8 High pressure cleaners Cold water high-pressure cleaner Arizona LP LMX XP Alaska XP Tucson LP Tucson XL LP Page Operating pressure (max pressure) Operating pressure (max pressure) Delivery rate Delivery rate Absorbed power RPM Voltage Max inlet water temperature Weight with packaging Packaging Pieces for pallet Code Model bar (max bar) psi (max psi) l/h GPM W RPM V - Hz °C Kg/lbs cm n°(cm x cm) 8.669.0001 ALASKA 1409 XP 12 140 (180) 2030 (2610) 540 2.4 2800 2800 230 - 50 40 28/62 39x39 h 61 18(120x80) 8.613.0001 LMX 1211 XP 13 50÷120 (150) 725÷1740(2175) 660 2.91 3300 2800 230 - 50 40 35.5/78 60x37,5 h 72.5 12(120x80) 8.613.0015 LMX 2007 XP 13 50÷200 (220) 725÷2900(3190) 420 1.85 3300 2800 230 - 50 40 35.7/78 60x37,5 h 72.5 12(120x80) 8.665.0101 ARIZONA R 1209 LP 14 120 (150) 1740(2175) 510 2.23 2300 1450 230 - 50 40 30.5/67 60x38 h 72 12(120-80) 8.665.0106 ARIZONA R 1311 LP 14 130 (150) 1885(2175) 660 2.90 2900 1450 230 - 50 40 32.5/71 60x38 h 72 12(120-80) 8.671.0001 TUCSON 1211 LP 15 30÷120(150) 435÷1740(2175) 660 2.91 3000 1450 230 - 50 40 38.6/85 61x40 h 91 9(120x80) 8.671.0002 TUCSON 1509 LP 15 30÷150(160) 435÷2175(2320) 540 2.38 3000 1450 230 - 50 40 35/77 61x40 h 91 9(120x80) 8.671.0003 TUCSON 1713 LP 16 30÷170 435÷2465 780 3.43 6000 1450 400 - 50 40 44/97 61x40 h 91 9(120x80) 8.671.0004 TUCSON 2017 LP 16 30÷200 435÷2900 1000 4.49 9400 1450 400 - 50 40 46/101 61x40 h 91 9(120x80) 8.672.0001 TUCSON XL 2015 LP 17 30÷200 435÷2900 900 3.96 7000 1450 400 - 50 40 66/145 61x40 h 91 9 (120x80)

143. GENERAL TERMS OF SALE Goods travel at buyer’s risk. Images and technical specifications of products and accessories are not binding and can be modified without notice.

4. 4 Lavorwash Group is worldwide leader in cleaning industry since 1975 and offers a wide and complete range of cleaning machinery suitable for any kind of applications, both indoor and outdoor relying on a forty-year experience. Over the years, Lavorwash has grown to become a specialist manufacturer of professional and household cleaning systems, acquiring various leading brands and diversifying its own range to offer innovative products of excellence. Lavorwash Group has production plants in Italy and around the world and nowadays it employs over 300 staff and has around 200 associates, with branches in several countries around the world such as France, the United Kingdom, Spain, Poland, Brazil and China. Lavorwash is a company with a consolidated reputation at national and international levels. It operates locally through branches located around the world, delivering its products through importers, distributors, agent network and direct relations with large retailing chains

6. 6 Cold water high-pressure cleaners VANGUARD LINE Cold water high-pressure cleaners HERITAGE LINE Cold water high-pressure cleaners with petrol engine Hot water high-pressure cleaners Dry vacuum cleaners Wet & dry vacuum cleaners Carpet cleaners Page 10 Page 18 Page 23 Page 26 Page 46 Page 64 TABLE OF CONTENTS

9. 9 High pressure cleaners Columbia R LP Mystic R XP Cold water high-pressure cleaner Thermic 5H Thermic 9L Page Operating pressure (max pressure) Operating pressure (max pressure) Delivery rate Delivery rate Absorbed power RPM Voltage Max inlet water temperature Weight with packaging Packaging Pieces for pallet Code Model bar (max bar) psi (max psi) l/h GPM W RPM V - Hz °C Kg/lbs cm n°(cm x cm) 8.672.0002 TUCSON XL 2021 LP 17 30÷200 435÷2900 1260 5.55 9400 1450 400 - 50 40 72.3/159 61x40 h 91 9 (120x80) 8.672.0003 TUCSON XL 2515 LP 17 30÷250 435÷3600 900 3.96 9400 1450 400 - 50 40 73/161 61x40 h 91 9 (120x80) 8.661.0703 MYSTIC R 1409 XP 20 130 (150) 1885(2175) 540 2.38 2800 2800 230 - 50 40 32.5/71 60x38 h 72 12(120-80) 8.668.0027C BOLT 1510 LP 21 130 (150) 1885(2175) 540 2.38 2800 2800 230 - 50 40 32/70 47x58 h 58 12(120-80) 8.654.1071 COLUMBIA R 1211 LP 22 30÷120 (150) 435÷1812 (2175) 660 2.91 3000 1450 230 - 50 40 40/88 55x62 h 59 12 (120x100) 8.654.1073 COLUMBIA R 1515 LP 22 30÷150 435÷2175 900 3.96 5000 1450 400 - 50 40 54/118 55x62 h 59 12 (120x100) 8.654.1072 COLUMBIA R 2015 LP 22 30÷200 435÷2900 900 3.96 7000 1450 400 - 50 40 54/118 55x62 h 59 12 (120x100) 8.601.0107 THERMIC 5H 23 30÷160 435÷2320 570 2.51 5 hp 3000 - 40 37.5/83 54.5x54.5 h 69.5 8 (120x80) 8.601.0175C THERMIC 6,5 24 30÷180 435÷2610 690 2.77 6,5hp 3600 - 40 38/84 47x57 h57 12 (120x100) 8.601.0188C THERMIC 9 L 25 30÷200 435÷2900 780 3.44 9 hp 3400 - 40 53/116 70x57 h 70 9 (120x80) Thermic 6,5

26. 26 High pressure cleaners The hot water high-pressure cleaner is the best tool for tough or non water-soluble dirt removal. Suitable for different uses and ideal in several sectors like agriculture, food industry and primary and secondary building. Excellent for machines washing like: tools, engines, farm tractors and means of transport (oily dirt); removal or animal and vegetable residuals (stables and food industry), washing of heavy building equipments (cement mixers, cranes, earth- moving equipments etc.). In the food industry has a perfect hygienising effect. Why a hot water high-pressure cleaner? It is necessary the use of a hot water high-pressure cleaner whenever it is necessary to degrease oily or particularly tough dirt in the shortest time possible. Washing efficiency of hot water is much higher that the cold water one (up to 50% higher on some kind of dirt), because heat assists dirt degrease. Heat effect on the surface produce also fast drying. With the use of a hot water high-pressure cleaner it is possible to have: shorter washing time (under the same kind of dirt), better degrease of non water- soluble dirt , shorter drying time and less quantity of chemical product used: in few words, lower cleaning fixed costs and water saving. The boiler It is a diesel fuel heater that raises water temperature coming out of the pump; the difference between inlet and outlet water temperature is technically indicated like DeltaT. Boiler dimensions, in other words coil and diesel fuel consumption, determine the thermal power of the burner. Under the same conditions, increasing the delivery rate (quantity of water to be heated) the Delta T decreases proportionally. It is easy to understand why high pressure cleaners with higher delivery rates have more powerful burners: to grant the best operating temperature in each working condition. All our boilers have very high thermal efficiency, near 90% or higher. This means very low operating cost with reference to diesel fuel consumption. Hot water high-pressure cleaner

81. 81 Floor scrubber driers Double squeegee for both forward and reverse washing and drying. PP brush suitable for most common floors (brush for carpet and moquette cleaning available). ABS shock-proof covers. Non- marking rubber wheels. Cylindrical brush quick connection and release: the fitting and releasing of the brush does not require the use of tools. Ordinary cleaning and maintenance are simple and quick for anybody 1) Brush motor 2) Vacuum motor 3) Detergent solution flow 4) Dirty liquid flow Minimun working height 200 mm, allowing perfect cleaning under furnitures, chairs, tables, beds, etc. The tilting handle makes easy and stressless the daily use of the machine. Large tank capacity avoiding frequent refilling of the unit Walk-behind floor scrubber driers Optional accessories: 1 2 3 4 • 6.505.0009 Carpet cleaning kit • 4.512.0068 Extension electric cord 15 m with Schuko plug

85. 85 Floor scrubber driers Easy access to mechanical parts (easy maintenance of each component), removable recovery tank without tools. Parabolic squeegee, easy rubber blades replacement. The floating brush plate and squeegee grant the right cleaning pressure on any type of floor. The unit can be supplied mains (15 m optional extension cable available) or battery powered. Reclining handle: fit on any operator’s height and allowing the perfect cleaning also on 90° corners. Shock-absorbing covers, simple cleaning of the recovery tank, non marking wheels. User friendly analogic control panel. Control lever for brush operation and detergent water outflow. General ON/OFF switch, brush and vacuum motor switch, solenoid valve operation switch. Walk-behind floor scrubber driers Optional accessories: • 4.508.1058 Polyurethane front blade L.537 TH. 2,5 • 4.508.1059 Polyurethane rear blade L.590 TH. 3 • 6.508.0143 Abrasive pad Ø 381 mm-15" - beige (5 pcs.) • 6.508.0144 Abrasive pad Ø 381 mm-15” - green (5 pcs.) • 6.508.0141 Abrasive pad Ø 381 mm-15” - black (5 pcs.) • 5.511.1413 Tynex brush Ø 360 mm-14" • 5.511.1411 PP 0,03 brush Ø 360 mm-14" • 5.511.1412 PES brush Ø 360 mm-14" • 5.511.1129 EWU pad driver Ø 360mm-14" • 4.512.0068 Extension electric cord 15 m with Schuko plug • 0.108.0051 Booster battery charger • 0.107.0050 Battery AGM 12V 55Ah

101. 101 Floor scrubber driers Simple and intuitive controls reduce operator’s training time. Easy mechanical brush plate and squeegee lifting system, for low maintenance costs. The enbloc brush plate apply a very high pressure (50 kg) to the floor, strongly and deeply removing any kind of dirt. The ergonomic and comfortable shape of the machine allows the operator to work effortless for a long time, improving productivity. The detergent water tank serves as battery compartment, allowing the housing of great capacity batteries granting continuous working time up . Large capacity shock and acid proof polyethylene tank (110 l ) improves productivity avoiding frequent refilling and idle time. New control panel with digital controls and display. Digital display: with hour meter, battery charge level indicator, empty water tank level indicator, forward/reverse traction indicator. Speed control adjustment, horn, suction motor switch with delayed switch-off, brush plate lifting/ lowering selector switch, brush motor switch. Ride-on floor scrubber driers Optional accessories: • 4 x 0.107.0004 Tubular battery Pb-acid 6V 180Ah C5 • 0.108.0002 Battery Charger 24V 25A 220-240/50-60 • 5.511.1641 On-board Battery charger kit - 24V - 20A • 4.508.0901 Polyurethane front blade L.925 TH.3 Sh.40 • 4.508.0900 Polyurethane rear blade L.1015 TH.4 Sh.40 • 4.508.1251 Polyurethane front blade L.1027 TH.3 • 4.508.1252 Polyurethane rear blade L.1150 TH.4 • 6.508.0143 - Ø 380 mm - 15"- beige (5 pcs.) • 6.508.0144 - Ø 380 mm - 15"- green (5 pcs.) • 6.508.0141 - Ø 380 mm - 15"- black (5 pcs.) • 6.5 08.0032 - Ø 430 mm - 17"- beige (5 pcs.) • 6.508.0039 - Ø 430 mm - 17"- green (5 pcs.) • 6.508.0046 - Ø 430 mm - 17"- black (5 pcs.) •2x 5.511.1246 Tynex brush Ø 360 mm-14" • 2x 5.511.1169 PP 0,03 brush Ø 360 mm-14” • 2x 5.511.1203 PES brush Ø 360 mm - 14” •2x 5.511.1713 Tynex brush Ø 430 mm-17" • 2x 5.511.1711 PP 0,03 brush Ø 430 mm-17” • 2x 5.511.1712 PES brush Ø 430 mm - 17” • 2x 5.511.1592 EWU pad driver Ø 380 mm-15" • 2x 5.511.1095 EWU pad driver Ø 430 mm-17" • 4 x 0.107.0072 GEL Battery 6 MFP 180 6V 180Ah C5

103. 103 Floor scrubber driers vacuum motor allows to drastically reduce the operating noise. The ergonomic and comfortable shape of the machine allows the operator to work effortless for a long time, improving productivity. Thanks to the compact dimensions the machine can work with agility even in narrow spaces. The easy access to the recovery tank allows fast cleaning and sanification of the tank; the tilting tank together with a large size drain hose allow the complete emptying of the tank and the removal of any type of solid dirt. The antifoam device protects suction motor, as well as the electronic floating switch that stops suction when the tank is full. switch with delayed switch-off, brush plate lifting/lowering selector switch, brush motor switch. All motors are protected by thermal breakers. The detergent water tank serves as battery compartment, allowing the housing of great capacity batteries. Battery charger and suction motor are placed the recovery tank; the housing of the Ride-on floor scrubber driers Optional accessories: • 4 x 0.107.0004 Tubular battery Pb-acid 6V 180Ah C5 • 4.508.0901 Polyurethane front blade L.925 TH.3 Sh.40 • 4.508.0900 Polyurethane rear blade L.1015 TH.4 Sh.40 • 4.508.1251 Polyurethane front blade L.1027 TH.3 • 4.508.1252 Polyurethane rear blade L.1150 TH.4 Comfort XS-R Up is equipped with actuators for the automatic lifting of the brush plate and squeegee. New control panel with digital controls and display. Digital display: with hour meter, battery charge level indicator, empty water tank level indicator and forward/reverse traction indicator. Speed control adjustment, horn, suction motor • 6.508.0143 - Ø 380 mm - 15"- beige (5 pcs.) • 6.508.0144 - Ø 380 mm - 15"- green (5 pcs.) • 6.508.0141 - Ø 380 mm - 15"- black (5 pcs.) • 6.5 08.0032 - Ø 430 mm - 17"- beige (5 pcs.) • 6.508.0039 - Ø 430 mm - 17"- green (5 pcs.) • 6.508.0046 - Ø 430 mm - 17"- black (5 pcs.) •2x 5.511.1246 Tynex brush Ø 360 mm-14" • 2x 5.511.1169 PP 0,03 brush Ø 360 mm-14” • 2x 5.511.1203 PES brush Ø 360 mm - 14” •2x 5.511.1713 Tynex brush Ø 430 mm-17" • 2x 5.511.1711 PP 0,03 brush Ø 430 mm-17” • 2x 5.511.1712 PES brush Ø 430 mm - 17” • 2x 5.511.1592 EWU pad driver Ø 380 mm-15" • 2x 5.511.1095 EWU pad driver Ø 430 mm-17" • 4 x 0.107.0072 GEL Battery 6 MFP 180 6V 180Ah C5

105. 105 Floor scrubber driers Built with strong components, Comfort S-R have been designed to resist even to extreme stresses; the frame is made of steel profiles with a thickness varying from 5 to 12 mm, protected with a high resistance corrosion-proof paint. Quick lock recovery tank cap allows for fast and esy cleaning and sanification of the tank; the tilting tank together with a large size drain hose allow the complete emptying of the tank and the removal of any type of solid dirt. The antifoam device protects suction motor, as well as the electronic floating switch that stops suction when the tank is full. 50 kg of continuous brush plate pressure with Self Leveling System to strongly and deeply removing any kind of dirt on any kind of floor. Strong oil-proof polyurethane wheels. 500 Ah C5 battery box allowing continuous working time up to 5 hours. Ride-on floor scrubber driers Optional accessories: • 4.508.1251 Polyurethane front blade L.1027 TH. 3 • 4.508.1252 Polyurethane rear blade L.1150 TH. 4 • 6.508.0150 - Ø 457 mm-18” - beige (5 pcs.) • 6.508.0151 - Ø 457 mm-18” - green (5 pcs.) • 6.508.0142 - Ø 457 mm-18” - black (5 pcs.) •2x 5.511.1848 Tynex brush Ø 457 mm-18" • 2x 5.511.1849 PP 0,03 brush Ø 457 mm-18” • 2x 5.511.1847 PES brush Ø 457 mm-18” • 2x 5.511.1850 EWU pad driver Ø 457 mm-18” • 0.107.0008 Battery box Pb-acid 24V 500Ah C5 • 0.107.0011 Gel battery box 24V 400Ah C5 • 0.108.0003 Battery Charger 24/36V 50/60A - 220-240/50-60 Comfortable steering wheel. User friendly control panel, provided with hour meter, speed adjustment knob and detergent solution low level warning light. All motors are protected by thermal breakers.

123. 123 Steam generators Steam generators Steam regulation allows washing adjusting considering the surface to be treated: in this way every kind of surface has the right treatment. Steam cleaning function is perfect in shops, premises, offices as well as in household application and removes the toughest and hidden dirt while eliminating mites, germs and bacteria. Lavor PRO steam cleaner GV Kone sanitizes and sterilizes every surface with steam power, without using detergents or disinfectants. GV Kone is environmental friendly. The machine is user friendly and has a wide range of accessories: GV Kone is a confortable and safe daily working tool.

49. 49 Vacuum cleaners Windy 365 IF Windy 278 IF Windy 278 PF Windy 378 IR Windy 378 PF Dry vacuum cleaners/wet & dry vacuum cleaners and Injection extraction Jupiter Code Model Page Voltage Motor power Column depresion Air suction Tank capacity Noise level Packaging L x l x H Packaging weight Packaging weight Pieces for pallet V - Hz W/W max kPa/mmH 2 O l/s l dB (A) cm kg lbs N° 8.240.0001 WINDY 365 IR 59 220/240V - 50/60Hz 3000/3600 22/2200 195 l/s 65 l 79 dB (A) 65x55x104 25,5 56 4 8.247.0002 WINDY 278 PF 60 220/240V - 50/60Hz 2000/2400 22/2200 130 l/s 78 l 79 dB (A) 75x60x103 29,6 65 4 8.247.0001 WINDY 278 IF 61 220/240V - 50/60Hz 2000/2400 22/2200 130 l/s 78 l 79 dB (A) 75x60x103 29,6 65 4 8.256.0002 WINDY 378 PF 62 220/240V - 50/60Hz 3000/3600 22/2200 195 l/s 78 l 79 dB (A) 75x60x103 30,5 67 4 8.248.0001 WINDY 378 IR 63 220/240V - 50/60Hz 3000/3600 22/2200 195 l/s 78 l 79 dB (A) 75x60x103 30,5 67 4 8.204.0066 GBP 20 Pro 65 230V - 50Hz 1200/1400 27/2700 70 l/s 20 l 75 dB (A) 40x39x64 9,5 20,9 18 0.065.0001 JUPITER 66 230V - 50Hz 1100 23/2300 50 l/s 6,5 l 70 dB (A) 55x35x64 14 31 12 GBP 20 Pro

54. 54 Vacuum cleaners WINDY range is the commercial vacuum cleaners line suitable for wet and dry applications: three models equipped with 1 up to 3 professional single stage motor (from 1,2 up to 3,6 kW), stainless steel or anti shock plastic tank, tilting or fixed tank: WINDY are mainly designed for daily light industrial use and are perfectly suited to the most common demand of cleaning contractors, garages, workshops etc... They are equipped with the new manual RF (reverse flow) filter cleaning system, granting high cleaning efficiency and longer lifespan of the motors. Practical in every situation, the new WINDY range offers accessories holder, cable holder and a new rotating ON/OFF switch, simple and resistant to daily use. Equipped with professional accessories and professional filter, WINDY is the answer to your requests! WINDY: New commercial wet & dry range of vacuum cleaners Wet & dry vacuum cleaners

69. 69 Vacuum cleaners Wet & dry vacuum cleaners Turbo brush Ø 35 Code 3.754.0081 Antifoam device Code 0.110.0020 Ø 35 270 mm Turbo brush (for Silent, PRO Worker, Windy 120 IF, Windy 130 IF model) This special brush grants top results, because it has an additional small rotary brush creating a sweeping effect that helps effective suction. This device avoids the forming of foam that may affect the operation of the float.

83. 83 Floor scrubber driers Walk-behind floor scrubber driers Optional accessories: Double squeegee for both forward and reverse washing and drying. PP brush suitable for most common floors and soft brush for carpet and moquette cleaning. Hot water cleaning for a faster and perfect removal of the most common organic dirt ( grease, mud, oil, etc.) Cylindrical brush quick connection and release: the fitting and releasing of the brush does not require the use of tools. Ordinary cleaning and maintenance are simple and quick for anybody 1) Brush motor 2) Vacuum motor 3) Hot water with detergent solution flow 4) Dirty liquid flow Minimun working height 200 mm, allowing perfect cleaning under furnitures, chairs, tables, beds, etc. The tilting handle makes easy and stressless the daily use of the machine. Large tank capacity avoiding frequent refilling of the unit 1 2 3 4 • 6.505.0009 Carpet cleaning kit • 4.512.0068 Extension electric cord 15 m with Schuko plug

87. 87 Floor scrubber driers Indicator of clean water tank level. Detergent solution regulation. Recovery tank drain hose with adjustable flow system. Thanks to the special squeegee support it is easily possible the tilting of the machine to carry out the drying of the floor without scrubbing. The oversize wheels facilitate maneuverability and effortless use. User friendly analogic control panel. Control lever for brush operation and detergent water outflow . ON/OFF and battery cutout key switch, brush and vacuum motor switch, detergent dosing knob (optional), Thermal circuit breaker to protect vacuum and brush motor, battery level indicator, hour meter (optional). Easy access to recovery water tank with visual inspection. Extremely silent (62 dB) thanks to the particular housing of the vacuum motor and the use of soundproofing material. Walk-behind floor scrubber driers Optional accessories: • 4.508.1178 Polyurethane front blade L.830 TH. 3 • 4.508.1177 Polyurethane rear blade L.870 TH. 4 • 6.508.0032 Abrasive pad Ø 430 mm-17" - beige (5 pcs.) • 6.508.0039 Abrasive pad Ø 430 mm-17” - green (5 pcs.) • 6.508.0046 Abrasive pad Ø 430 mm-17” - black (5 pcs.) • 5.511.1713 Tynex brush Ø 430 mm-17" • 5.511.1711 PP 0,03 brush Ø 430 mm-17” • 5.511.1712 PES brush Ø 430 mm - 17” • 5.511.1095 EWU pad driver Ø 430 mm-17" • 0.107.0050 Batteria AGM 12V 55Ah • 4.512.0068 Extension electric cord 15 m with Schuko plug

89. 89 Floor scrubber driers Walk-behind floor scrubber driers Accessible on-board charger (DC only, when provided), far away from sprays. Time saving convenient foot operating squeegee lift. Handle can be easily adjusted to fit comfort of operators even in narrow spaces. Extensive squeegee spin for easy blade replacement and perfect suction even on corners Easy setting and automatic solution release to save chemical and fit different floor conditions. High stability and capability to overtake small steps. On/off switch protecting unintentional use. Protection against overloads, battery discharge abuse (DC only) and undesired run. Convenient one switch maintenance over the brush. Eco Energy setting for extensive working time and extremely quite operations (DC only). Easy access and handling to clean recovery tank and floater. Less downtimes due to simple maintenance and construction Great visibility and cleaning capability on hard to reach edges on both sides of the brush. Optional accessories: • 4.508.1324 Polyurethane front blade TH. 3 • 4.508.1325 Polyurethane rear blade TH. 4 • 6.508.0032 Abrasive pad Ø 430 mm-17" - beige (5 pcs.) • 6.508.0039 Abrasive pad Ø 430 mm-17” - green (5 pcs.) • 6.508.0046 Abrasive pad Ø 430 mm-17” - black (5 pcs.) • 5.511.1942 Tynex brush Ø 430 mm-17" • 5.511.1943 PP 0,03 brush Ø 430 mm-17” • 5.511.1944 PES brush Ø 430 mm - 17” • 5.511.0229 EWU pad driver Ø 430 mm-17" • 2 x 0.107.0050 Battery AGM 12V 55Ah • 4.512.0068 Extension electric cord 15 m with Schuko plug

107. 107 Floor scrubber driers The strong V-shaped floor squeegee made of steel profile is widely adjustable and allows to combine the operation of the rubber blades with the high suction power, to get a perfect drying result on every surface. The special filter box retains solid debris and prevents the obstruction of the suction hose. Thanks to the optimal weight distribution and to the use of strong oil-proof polyurethane wheels the drive is perfect in all working conditions. The emptying of the solution water tank is quick with a simple and easy accessible mechanical tap. The unique anti foam device dramatically reduces the foam generation and prevents it from touching the suction motor, thus protecting its operation. The electronic floating switch stops suction when the tank is full. Large tank opening for fast and easy cleaning and sanification. Comfort M scrubbers are easy to use thanks to the simple and user friendly controls. From the control panel the operator can adjust the maximum forward speed and the quantity of cleaning solution outflow, selecting the options most suitable to the dirt type. Job is simplified and made faster by the automatic lifting of the squeegee and of the brush plate. Ride-on floor scrubber driers Optional accessories: • 4.508.1167 Polyurethane front blade L.1270 TH. 4 • 4.508.0897 Polyurethane rear blade L.1345 TH. 6 • 6.508.0034 - Ø 483 mm - 19"- beige (5 pcs.) • 6.508.0041 - Ø 483 mm - 19"- green (5 pcs.) • 6.508.0048 - Ø 483 mm - 19"- black (5 pcs.) •2x 5.511.1098 Tynex brush Ø 483 mm-19" • 2x 5.511.1128 PP 0,03 brush Ø 483 mm-19” • 2x 5.511.1206 PES brush Ø 483 mm - 19” • 2x 5.511.1099 EWU pad driver Ø 483 mm-19" • 0.107.0009 Battery box Pb-acid 36V 360Ah C5 • 0.107.0012 Gel battery box 36V 320Ah C5 • 0.108.0003 Battery Charger 24/36V 50/60A - 220-240/50-60

109. 109 Floor scrubber driers The unique anti foam device dramatically reduces the foam generation and prevents it from touching the suction motor, thus protecting its operation. The electronic floating switch stops suction when the tank is full. Large tank opening for fast and easy cleaning and sanification. The motorwheels, designed and built by Lavor, grant optimal performances and exceptional reliability (over 30.000 hours). The innovative three-wheel drive system ensures perfect traction in every operating condition. The high power of the three motorwheels allows the machine to get over remarkable slopes. Designed to perform the hardest work and to resist even to extreme stresses with maximum comfort; the frame is made of steel profiles with a thickness varying from 5 to 12 mm, protected with a high resistance corrosion-proof paint. The cleaning solution tank with an exceptional capacity of 300 liters and the high autonomy of the battery ensure a productivity at the top of the range. The wide rear opening allows for an easy and quick refilling of the cleaning solution tank. Ride-on floor scrubber driers Optional accessories: • 4.508.1167 Polyurethane front blade L.1270 TH. 4 • 4.508.0897 Polyurethane rear blade L.1345 TH. 6 • 6.508.0031 - Ø 406 mm - 16"- beige (5 pcs.) • 6.508.0038 - Ø 406 mm - 16"- green (5 pcs.) • 6.508.0045 - Ø 406 mm - 16"- black (5 pcs.) •3x 5.511.1110 Tynex brush Ø 406 mm-16" • 3x 5.511.1120 PP 0,03 brush Ø 406 mm-16” • 3x 5.511.1204 PES brush Ø 406 mm - 16” • 3x 5.511.1111 EWU pad driver Ø 406 mm-16" • 0.107.0010 Battery box Pb-acid 36V 525 Ah C5 • 0.107.0013 Gel battery box 36V 400 Ah C5 • 0.108.0003 Battery Charger 24/36V 50/60A - 220-240/50-60

31. 31 High pressure cleaners Mississippi-R XP Hot water high-pressure cleaner Standard equipment: • 3.700.0036 Gun M22 - 3/8” • 3.701.0015 Lance M22 high/low pressure • 3.103.0047 Nozzle type 030 • 4.618.0049 High pressure hose 8 m • Power cable 5 m Equipped with: • Three ceramic coated pistons, brass axial pump head with built-in by-pass valve. • Suction and delivery S. S. valves. • Vertical burner with high thermal efficiency steel coil. • Temperature regulation gauge. • Diesel pump with by-pass valve. • Detergent built-in tank for indirect suction (2,4 lt.) • Pressure regulator. • Glicerine pressure gauge. • Power cable holder. • Accessory holder. • Ergonomic handle. Mississippi-R 1310 XP code 8.625.0101 operat. pressure/max 130/150 bar-1885/2175 psi delivery rate 600 l/h-2.64 GPM abs. power/voltage 3000W - 230V~50Hz 1ph motorpump type/RPM MPBX2/2800 RPM max. water inlet/outlet temp. 40/90 °C dimension/weight 80x55x83cm/55 Kg - 121 lbs

80. 80 Floor scrubber driers Sprinter • Suitable to work in high congested areas like small shops, offices, kitchens, schools, hospitals, bars, gyms, restaurants • Three controls for brush drive, washing and drying operations • Double floor squeegee for both forward and reverse drying • Sound pressure 68 dB (A) • Min. working height required 200 mm • Structure built with durable materials • Suitable load on the brush for an optimal cleaning efficiency • Detachable detergent/recovery tank • Cable holder • 7mt electric cable • Non-marking wheels. Walk-behind floor scrubber driers Standard equipment: Sprinter code 8.501.0501 power supply 230 V - 50 Hz scrubbing/squeegee width 290/320 mm max working capacity 1015 m²/h solution tank capacity 2.8 l/0.74 gal recovery tank capacity 5.6 l/1.48 gal traction mechanical RPM/pressure on the brushes 1000/7 kg/15,43 lbs brush motor power 200 W noise level dB (A) 68 depression/vacuum motor 1428 mmH 2 O/800 W dimensions/weight 37 x 37 x 113 cm/13 kg • 5.509.0007 Stationary plate • 0.010.0034 4 x 100 ml concentrated detergent • 6.505.0002 PP brush Ø 100 mm • 6.505.0001 Squeegee kit Watch the video on youtube: www.youtube.com/lavorpro

82. 82 Floor scrubber driers Crystal Clean • Suitable to work in high congested areas like small shops, offices, kitchens, schools, hospitals, bars, gyms, restaurants • 90°C hot scrubbing • Three controls for brush drive, washing and drying operations • Double floor squeegee for both forward and reverse drying • Sound pressure 68 dB (A) • Min. working height required 200 mm • Structure built with durable materials • Suitable load on the brush for an optimal cleaning efficiency • Detachable detergent/recovery tank • Cable holder • 10 mt electric cable • Non-marking wheels. Walk-behind floor scrubber driers Standard equipment: Crystal Clean code 8.501.0508 power supply 230 V - 50 Hz scrubbing/squeegee width 290/320 mm max working capacity 1015 m²/h solution tank capacity 2.8 l/0.74 gal recovery tank capacity 5.6 l/1.48 gal traction mechanical RPM/pressure on the brushes 1000/7 kg/15,43 lbs brush motor power 200 W noise level dB (A) 68 depression/vacuum motor 1428 mmH 2 O/800 W dimensions/weight 37 x 37 x 113 cm/13 kg • 5.509.0007 Stationary plate • 0.010.0034 4 x 100 ml concentrated detergent • 6.505.0002 PP brush Ø 100 mm • 6.505.0001 Squeegee kit • 5.509.0394 Soft brush Ø 100 mm Watch the video on youtube: www.youtube.com/lavorpro

91. 91 Floor scrubber driers The outflow of the detergent solution is controlled by a solenoid valve. The actuation of the solenoid valve is operated by the control lever, avoiding the detergent solution outflow when the brush is stopped during the interruptions of work. Easy and intuitive controls. The outflow of the cleaning solution is easily controlled using the mechanical lever placed on the control panel. Inspectable mesh filter to trap any existing solid body in the cleaning solution. Powerful gearmotor; metal brush plate wit h integrated plastic splash guard/bump e r. Renovated squeegee with new pressure adjusting system. The squeegee blades are easily replaceable without the use of tools. Quick and easy squeegee coupling through the two large knobs; the squeegee is released without any damage in the event of accidental impact. Walk-behind floor scrubber driers Optional accessories: • 4.508.1178 Polyurethane front blade L.830 TH. 3 • 4.508.1177 Polyurethane rear blade L.870 TH. 4 • 6.508.0034 Abrasive pad Ø 483 mm-19" - beige (5 pcs.) • 6.508.0041 Abrasive pad Ø 483 mm-19” - green (5 pcs.) • 6.508.0048 Abrasive pad Ø 483 mm-19” - black (5 pcs.) • 5.511.1098 Tynex brush Ø 483 mm-19" • 5.511.1128 PP 0,03 brush Ø 483 mm-19” • 5.511.1206 PES brush Ø 483 mm - 19” • 5.511.1099 EWU pad driver Ø 483 mm-19" • 2 x 0.107.0002 Tubular battery Pb-acid 12V 118Ah C5 • 4.512.0068 Extension electric cord 15 m with Schuko plug • 2 x 0.107.0063 GEL Battery 12 MFP 105 12V 105Ah C5

93. 93 Floor scrubber driers level indicator. Detergent regulation device. Recovery tank drain hose with adjustable flow system. Automatic brush lifting (only model 66BTA). Battery trolley for a quick and easy battery change. Big size wheels for better maneuverability and effortless use. User friendly analogic control panel. Control lever for brush operation and detergent water outflow. ON/OFF and battery cutout key switch , brush and vacuum motor switch , detergent regulation device. Thermal circuit breaker to protect vacuum motor and brush motor, battery charge level indicator. Hour meter, clean water tank Automatic detergent dosing system. Fully accessible recovery water tank with visual inspection. Easy access to the recovery tank. Easy access and simple service of the components without use of tools. Walk-behind floor scrubber driers Optional accessories: • 4.508.1178 Polyurethane front blade L.830 TH. 3 • 4.508.1177 Polyurethane rear blade L.870 TH. 4 • 4.508.1526 Polyurethane front blade L.860 TH. 4 • 4.508.1525 Polyurethane rear blade L.900 TH. 4 • 6.508.0035 - Ø 533 mm-21"- beige • 6.508.0042 - Ø 533 mm-21”- green • 6.508.0049 - Ø 533 mm-21”- black • 6.508.0030 - Ø 340 mm-13"- beige • 6.508.0037 - Ø 340 mm-13" - green • 6.508.0044 - Ø 340 mm-13"- black • 5.511.1114 Tynex brush Ø 533 mm-21" • 5.511.1106 Tynex brush Ø 330 mm-13" 2x • 5.511.1794 PP brush Ø 533 mm-21" • 5.511.1255 PP 0,03 brush Ø 330 mm-13 " 2x • 5.511.1207 PES brush Ø 533 mm-21" • 5.511.1202 PES brush Ø 330 mm-13" 2x • 5.511.1115 EWU pad driver Ø 533mm-21" • 2x 5.511.1107 EWU pad driver Ø 330mm-13" • 2 x 0.107.0002 Tubular battery Pb-acid 12V 118Ah C5 (5 pcs package) • 2 x 0.107.0063 GEL Battery 12 MFP 105 12V 105Ah C5 • 0.108.0001 Battery Charger 24V 12A 220-240/50-60

95. 95 Floor scrubber driers Easy access to battery and vacuum motor compartment, without using tools. Large tank capacity, at the top in the category (67 l). 2 x 12V -118 Ah C5 batteries to grant long work autonomy, up to 3 hours. Heavy duty 15 mm steel monobloc brush plate. Great pressure on the floor for a deep cleaning even on the toughest dirt. Self levelling system. Solenoid valve to stop the detergent water outflow during the work interruptions. User friendly control panel. Speed adjustment selectors. General ON/OFF and key switch, brush a nd vacuum motor switch . Thermal circuit breaker to protect vacuum motor and brush motor, battery level control, hour meter. Control lever for brush operation and detergent water outflow. Recovery tank drain hose. Quick fitting battery charger plug. Walk-behind floor scrubber driers Optional accessories: • 0.108.0001 Battery Charger 24V 12A 220-240/50-60 • 4.508.1178 Polyurethane front blade L.830 TH. 3 • 4.508.1177 Polyurethane rear blade L.870 TH. 4 • 6.508.0034 - Ø 483 mm-19"- beige • 6.508.0041 - Ø 483 mm-19”- green • 6.508.0048 - Ø 483 mm-19”- black • 6.508.0095 - Ø 280 mm-11"- beige • 6.508.0096 - Ø 280 mm-11"- green • 6.508.0097 - Ø 280 mm-11"- black • 6.508.0030 - Ø 340 mm-13"- beige • 6.508.0037 - Ø 340 mm-13" - green • 6.508.0044 - Ø 340 mm-13"- black • 5.511.1098 Tynex brush Ø 483 mm-19" •2x 5.511.1102 T ynex brush Ø 275 mm-10" •2x 5.511.1106 Tynex brush Ø 330 mm-13" • 5.511.1128 PP 0,03 brush Ø 483 mm-19 ” •2x 5.511.1254 PP 0,03 brush Ø 275 mm-10” •2x 5.511.1255 PP 0,03 brush Ø 330 mm-13” • 5.511.1206 PES brush Ø 483 mm - 19” •2x 5.511.1201 PES brush Ø 275 mm-10” •2x 5.511.1202 PES brush Ø 330 mm-13” • 5.511.1099 EWU pad driver Ø 483mm-19" • 2x 5.511.1103 EWU pad driver Ø 275mm-10" • 2x 5.511.1107 EWU pad driver Ø 330mm-13" • 2 x 0.107.0002 Tubular battery Pb-acid 12V 118Ah C5 • 5.511.1494 On-board Battery charger kit - 24V - 12A (5 pcs package) • 2 x 0.107.0063 GEL Battery 12 MFP 105 12V 105Ah C5

121. 121 Steam generators GV 3,3 M plus GV 8 T plus GV Katla Page Absorbed power Suction motor Max pressure Steam production Max Temperature Heating and activation time required Water tank capacity Detergent tank capacity Packaging dimensions Packaging weight Packaging weight Pieces for pallet Code Model W W bar Kg/h °C min l l mm L x l x h kg lbs n° 8.453.0001 GV KATLA 130 3300 - 9 4,62 175 7 5 5 750x600x700 31 91,27 10 8.450.0010 GV 3.3M PLUS 132 3300 - 9 4,62 175 7 5 5 595x435x650 37 81,57 2 8.458.0001 GV 8 T PLUS 134 8000 - 9 13,50 175 6 10 5 595x435x650 40 88,18 2 Steam generators

28. 28 High pressure cleaners operating pressure (max pressure) operating pressure (max pressure) delivery rate delivery rate absorbed power rpm voltage outlet temp. fuel consumption diesel tank antiscale tank heat output packaging packaging weight Code Model pag bar psi l/h GPM usa W RPM V °C l/h - gal/h l - gal l - gal kW cm Kg - lbs 8.699.0015 VULCANO 74 30 - - - - 300 - 230~50 max 140° 5,6 - 1.5 18 - 4.8 - 74 113x71x111 103.6 - 228 8.625.0101 MISSISSIPPI R 1310 XP 31 30÷130 435÷1885 330÷600 1.45÷2,64 3000 2800 230~50 max 90° 2,83 - 0.75 14 - 3.7 - 38 65x85x100 71.5 - 157 8.633.0107 DAKOTA R 1509 XP 32 30÷120 435÷1740 330÷660 1.45÷2.91 3200 2800 230~50 max 140° 3,7 - 0.97 16 - 4.2 - 58 69x85x111 94 - 207 8.633.0108 DAKOTA R 2007 XP 32 30÷150 435÷2175 330÷660 1.45÷2.91 4000 2800 400~50 max 140° 3,7 - 0.97 16 - 4.2 - 58 69x85x111 97 - 213 8.633.0109 DAKOTA R 1713 XP 32 30÷170 435÷2465 400÷780 1.76÷3.43 4700 2800 400~50 max 140° 3,7 - 0.97 16 - 4.2 - 69x85x111 95 - 209 8.620.0601 NPX 1211 XP 33 30÷120 435÷1740 330÷660 1.45÷2.91 3200 2800 230~50 max 140° 4,72 - 1.25 18 - 4.8 - 58 71x113x111 118 - 260 8.620.0617 NPX 1813 XP 33 30÷180 435÷2610 400÷780 1.76÷3.43 6300 2800 400~50 max 140° 4,72 - 1.25 18 - 4.8 - 58 71x113x111 117.5 - 259 8.630.0101 TEXAS R 1211 34 30÷120 435÷1740 330÷660 1.45÷2.91 3000 1450 230~50 max 140° 3,8 - 1.0 16 - 4.2 69x85x111 104 - 229 8.630.0102 TEXAS R 1509 34 30÷150 435÷2175 330÷540 1.45÷2.40 3000 1450 400~50 max 140° 3,8 - 1.0 16 - 4.2 69x85x111 104 - 229 Vulcano Mississippi-R XP Dakota-R XP NPX XP Hot water high-pressure cleaner

29. 29 High pressure cleaners Tekna LP LKX LP Texas-R XP Hot water high-pressure cleaner operating pressure (max pressure) operating pressure (max pressure) delivery rate delivery rate absorbed power rpm voltage outlet temp. fuel consumption diesel tank antiscale tank heat output packaging packaging weight Code Model pag bar psi l/h GPM usa W RPM V °C l/h - gal/h l - gal l - gal kW cm Kg - lbs 8.630.0103 TEXAS R 1611 34 30÷170 435÷2465 400÷660 1.76÷2.91 4300 1450 400~50 max 140° 3,8 - 1.0 16 - 4.2 69x85x111 104 - 229 8.621.2947 LKX 1310 LP 35 30÷110 435÷1595 330÷660 1.45÷2.91 3000 1450 230~50 max 140° 4,72 - 1,25 18 - 4.8 - 58 113x71x111 130.5 - 287 8.621.2934 LKX 1515 LP 36 30÷150 435÷2175 450÷900 1.98÷3.96 5500 1450 400~50 max 140° 5,6 - 1.5 18 - 4.8 - 74 113x71x111 143.4 - 316 8.621.2935 LKX 2015 LP 36 30÷200 435÷2900 450÷900 1.98÷3.96 7300 1450 400~50 max 140° 5,6 - 1.5 18 - 4.8 - 74 113x71x111 146 - 322 8.622.0901 TEKNA 1515 LP 37 30÷150 435÷2175 450÷900 1.98÷3.96 5500 1450 400~50 max 140° 4,72 - 1.25 22 - 5.8 2,4 - 0.6 58 130x78x111 161 - 355 8.622.0902 TEKNA 2015 LP 37 30÷200 435÷2900 450÷900 1.98÷3.96 7300 1450 400~50 max 140° 4,72 - 1.25 22 - 5.8 2,4 - 0.6 58 130x78x111 172 - 379 8.622.0921 TEKNA 2021 LP 37 30÷200 435÷2900 630÷1260 2.77÷5.55 9700 1450 400~50 max 140° 6,6 - 1,75 22 - 5.8 2,4 - 0.6 88 130x78x111 180 - 396

97. 97 Floor scrubber driers Adjustable speed ensures high precision in cleaning congested areas with obstacles. Intuitive controls reduce operator’s training time. Safety thermal breakers prevent motor problems in case of overheating or operator’s misuse. Strong mechanical control levers for heavy duty use. Large size drain hose for a fast emptying and a better cleaning of the recovery tank. Quick fitting battery charger plug. Easy access to battery and vacuum motor compartment, without using tools. Large capacity shock and acid proof polyethilene tanks (88 l) avoid frequent refilling and idle time. 4 x 6V -180 Ah C5 batteries granting continuous working time up to 4-5 hours. Heavy duty V-shaped squeegee ensures perfect drying of every type of floor, even with large joints. Non-marking wheels avoid marks after the drying. Completely adjustable to fit any surface. Walk-behind floor scrubber driers Optional accessories: • 4.508.0901 Polyurethane front blade L.925 TH.3 Sh.40 • 4.508.0900 Polyurethane rear blade L.1015 TH.4 Sh.40 • 6.508.0143 - Ø 380 mm-15"- beige • 6.508.0144 - Ø 380 mm-15" - green • 6.508.0141 - Ø 380 mm-15"- black • 2x 5.511.1246 Tynex brush Ø 360 mm-14" • 2x 5.511.1169 PP 0,03 brush Ø 360 mm-14” • 2x 5.511.1203 PES brush Ø 360 mm - 14” • 2x 5.511.1129 EWU pad driver Ø 360 mm-14" • 0.108.0002 Battery Charger 24V 25A 220-240/50-60 • 5.511.1495 On-board Battery charger kit - 24V - 25A (5 pcs package) • 4 x 0.107.0004 Tubular battery Pb-acid 6V 180Ah C20 + 2 x 5.511.0561 connection cable batteries • 4 x 0.107.0072 Gel battery 6 MFP 180 6V 180Ah C5 + 2 x 5.511.0561 connection cable batteries

106. 106 Floor scrubber driers Comfort M • Suitable for maintenance and deep cleaning of medium and large areas (up to 6.000 m²) • More than 90/120 kg of constant pressure on the brushes • Large load tank capacity, resulting in reduced number of stops and maximum use of battery charge for effective operation of the machine • Stability even when fully loaded • Front independent wheel-drive with tight steering radius • Easy access to electrical components • Automatic brush plate lifting system • Automatic squeegee lifting system • Automatic squeegee lifting while reverse going • Automatic control system for brush rotation and detergent water outflow • Antifoam device • Self-levelling brush plate • Hour meter • High-performance batteries resulting in high-working efficiency. Ride-on floor scrubber driers Standard equipment: Comfort M 102 code 8.578.0004 power supply 36V scrubbing/squeegee width 1020/1250 mm max working capacity 7140 m²/h solution tank capacity 200 l/52.84 gal recovery tank capacity 210-240 l/55.5-63.4 gal traction type/power front motorwheel/900 W RPM/pressure on the brushes 150/120 kg/246 lbs brush motor power 1500 W max gradient empty/full tank 10%/8% depression/vacuum motor 1800 mmH 2 O/550 W dimensions/weight 190x112x145 cm/342 kg • 2 x 5.511.1097 PP brush Ø 483 mm - 19" • 4.508.0217 Front squeegee blade L.1270 mm Shore 40 Th. 4 mm • 4.508.0216 Rear squeegee blade L.1345 mm Shore 33 Th. 6 mm Watch the video on youtube: www.youtube.com/lavorpro

108. 108 Floor scrubber driers Comfort L • Suitable for maintenance and deep cleaning of medium and large areas (up to 7.000 m²) • More than 120-170 kg of constant pressure on the brushes • 300 litres solution tank capacity allows exceptional autonomy and productivity • Stability even when fully loaded • Innovative traction system with three indipendent motor wheels controlled by electronic cards • Easy access to electrical components Automatic brush plate lifting system • Automatic squeegee lifting system • Automatic squeegee lifting while reverse going • Automatic control system for brush rotation and detergent water outflow • Antifoam device • Self-levelling brushes, hour meter, solenoid valve. High-performance batteries resulting in high-working efficiency. Ride-on floor scrubber driers Standard equipment: Comfort L 122 code 8.572.0002 power supply 36V scrubbing/squeegee width 1220/1450 mm max working capacity 8540 m²/h solution tank capacity 280 l/73.97 gal recovery tank capacity 315-340 l/83.2-89 gal traction type/power 3-wheels drive/3 x 600 W RPM/pressure on the brushes 150/170 kg/374 lbs brush motor power 3 x 1000 W max gradient empty/full tank 15%/14% depression/vacuum motor 1800 mmH 2 O/600 W dimensions/weight 222x130x169 cm/607 kg • 3 x 5.511.1109 PP brush Ø 406 mm - 16" • 4.508.0219 Front squeegee blade L.1500 mm Shore 40 Th. 4 mm • 4.508.0218 Rear squeegee blade L.1580 mm Shore 33 Th. 6 mm

117. 117 Sweepers Sweepers BSW 651 M SWL 700 ET SWL 700 ST 0.961.0001 paper panel filter 14 micron S S 0.961.0016 polyester panel filter 5 micron O O 0.961.0018 Hepa panel filter O O 0.942.0037 PP side brush S 0.961.0005 PP side brush S S 0.961.0181 mixed steel side brush O O 0.942.0050 PP main brush S 0.961.0008 PP - moplen body main brush - bristle d. 0,5 mm S O 0.961.0012 mixed steel - moplen body main brush O S 0.107.0002 Tubular battery Pb-acid - 12V 118Ah C5 O1 0.107.0063 GEL Battery - 12V 105Ah C5 O1 0.107.0004 Tubular battery Pb-acid - 6V 180Ah C5 O2 0.107.0072 GEL Battery - 6V 180Ah C5 O2 Accessories (1)-(2)= n° batteries 0.108.0001 Battery charger LWS 1-12/24V-12A (for battery 0.107.0002-0.107.0063) 0.108.0002 Battery charger LWS 2-12/24V-25A (for battery 0.107.0004-0.107.0072)

3. 3 Lavor PRO online www.lavorpro.com a website, full of useful information, offering expanded and constantly updated contents: each product sheet contains in addition to texts, technical specifications, standard and optional accessories and also the possibility to download technical data sheet and instruction manual as well. www.lavorpro.com a website easy to explor e and showing all the information about Lavor PRO products: it offers easy exploration and complete technical information. A website of modern concept helping our customer finding the necessary updated information about our products, easily and in real time. It offers complete product videos about machine running, machine use and plus of the main products of professional range: an additional very useful sales tool. www.lavorpro.com connecting to the Lavor PRO world is just a click away: complete information, products, videos and news available quickly and simply. www.lavorpro.com Watch the video on youtube: www.youtube.com/lavortv www.youtube.com/lavorpro

84. 84 Floor scrubber driers Quick • Suitable to work in high congested areas like small shops, offices, kitchens, schools, hospitals, bars, gyms, restaurants • Adjustable flow (automatic start-stop with solenoid valve) of the detergent solution depending on type of surface • Brush with quick release • Removable recovery tank • Available in battery version (36B) with integrated battery charger with data memory and for any type of batteries • Battery included • Squeegee lifting lever • Compact reclining handle with control switches • Easy access and simple service of the components. Walk-behind floor scrubber driers Standard equipment: • 5.511.1346 PP brush Ø 360 mm - 14" • 0.108.0072 On-board Battery charger 12V 8A only for model code: 8.518.0003 • 4.508.1100 Front squeegee blade L.537 mm - Th. 1,5 mm • 4.508.1101 Rear squeegee blade L.590 mm - Th. 2,5 mm Quick 36E Quick 36B code 8.518.0004 8.518.0003 power supply 220/240 V - 50/60 Hz 12 V scrubbing/squeegee width 360/460 mm 360/460 mm max working capacity 1260 m²/h 1260 m²/h solution tank capacity 11 l/2.91 gal 11 l/2.91 gal recovery tank capacity 12-13 l/3.2 gal 12-13 l/3.2 gal traction mechanical mechanical RPM/pressure on the brushes 130/18 kg/40 lbs 130/18 kg/40 lbs brush motor power 370 W 250 W detergent solution system solenoid valve solenoid valve depression/vacuum motor 850 mmH 2 O/400 W 650 mmH 2 O/180 W dimensions/weight 120x43x97 cm/49kg 120x43x97 cm/57kg • 0.107.0061 Maintenance free battery 12V MFP 50 65Ah C20/50Ah C-5 only for model code: 8.518.0003 • 0.108.0025 Power cable 1,5 mt. for battery charger only for model code: 8.518.0003 Watch the video on youtube: www.youtube.com/lavorpro

104. 104 Floor scrubber driers Comfort S-R • Suitable for maintenance and deep cleaning of medium and large areas (up to 4.500 m²) with a considerable reduction of cleaning costs • More than 50 kg of constant pressure on the brushes • Large load tank capacity, resulting in reduced number of stops and maximum use of battery charge for effective operation of the machine • Stability even when fully loaded • Front independent wheel-drive with tight steering radius • Easy access to electrical components • Automatic brush plate lifting system • Automatic squeegee lifting system • Automatic squeegee lifting while reverse going • Automatic device that stops brushes and detergent water outflow when the machine is stationary • Antifoam device • Self-levelling brushes • High-performance batteries resulting in high-working efficiency. Ride-on floor scrubber driers Standard equipment: • 4.508.1196 Front squeegee blade L.1027 mm Shore 40 Th. 3 mm • 4.508.1195 Rear squeegee blade L.1150 mm Shore 33 Th. 4 mm Comfort S-R 90 code 8.575.0010 power supply 24V scrubbing/squeegee width 900/1000 mm max working capacity 6200 m²/h solution tank capacity 140 l/36.99 gal recovery tank capacity 150-180 l/39.6-47 gal traction type/power front motorwheel/1000 W RPM/pressure on the brushes 150/50 kg/176 lbs brush motor power 1250 W max gradient empty/full tank 10%/7% depression/vacuum motor 1734 mmH 2 O/550W dimensions/weight 180x103x150 cm/264 kg • 2 x 5.511.1845 PP brush Ø 457 mm - 18" Watch the video on youtube: www.youtube.com/lavorpro

120. 120 Steam generators GV Etna 4.1 GV Etna 4.1 FOAM Steam generators Page Absorbed power Suction motor Max pressure Steam production Max Temperature Heating and activation time required Water tank capacity Detergent tank capacity Packaging dimensions Packaging weight Packaging weight Pieces for pallet Code Model W W bar Kg/h °C min l l mm L x l x h kg lbs n° 8.404.0051 GV KONE 122 2300 - 4 2,6 143 10 2,4 - 470x330x350 8 17,64 25 8.406.0015 GV Egon VAC 124 1900 1200 5 2,3 152 2 1,2 - 550x400x500 14 30,86 16 8.451.0201 GV ETNA 4.1 126 3000 1100 7 3,25 165 4 5 5 750x600x1030 42,5 93,69 4 8.451.0210 GV ETNA 4.1 FR 126 3000 1100 7 3,25 165 4 5 5 750x600x1030 42,5 93,69 4 8.451.0208 GV ETNA 4000 FOAM 128 3000 1500 7 3,25 165 4 5 5 750x600x1030 42,5 93,69 4 GV Kone GV Egon VAC

125. 125 Steam generators Vacuum steam generators Silent operation in sensitive and crowded areas, just setting the suction power on the gun. Thanks to the water filter it is possibile to empty dirt water tank in a few seconds, no need of paper collector filters. No more waiting for the boiler to cool down, it can be safely refilled, even while you are using it. Set the boiler, choose the steam intensity. All the controls are on the handle, press the lever to steam, press the button to vacuum. Fields of applications Steam system: Hospitality, community & healthcare (hospitality, buildings cleaning, spa & sport, education & community, healthcare). Food & beverage (food industry, catering, beverage, winery). Industry (industry, trasportation, car washers, car dealers). GV Egon VAC allows, simply and quickly and with the exclusive use of water, steam cleaning of all surfaces together with dust and liquid vacuuming. It is possible to clean and sanitize all surfaces (ceramic, stainless steel, glass, wood, linoleum, marble, carpet, armchairs and sofas) with high temperature steam, removing mites, germs, bacteria and prevent the onset of allergies. High pressure stainless steel boiler with unlimited autonomy, ready in a few moments and complete with a wide set of accessories. With high efficiency suction and the electronic control, it is possible to set vacuum power on the gun and to vacuum steam melted with dirt. It is possible to vacuum dust and liquids with a 4 stage filtering system by adding, optionally, filtering water for greater filtration efficiency.

66. 66 Injection extraction Injection extraction Standard equipment: • 0.965.0003 Hose 2,5 m • 2 x 0.965.0004 • 0.965.0001 • 0.965.0002 • Power cable 7,5 m Jupiter Equipped with: • Spray-extraction cleaner with a separate anti-foaming tank. • Designed for rug, carpet, and upholstery cleaning in offices, clinics, cinemas and households, as well as car upholstery. • Thorough cleaning through the 4 bar spray pressure and 230 mbar suction power. • Spray and extraction functions are separately operable. • Separate fresh and wastewater tanks, each containing 6,5 l. Separate container for anti-foaming agent. • Clear, ergonomic nozzles. • Long stainless steel vacuum tube for convenient, effortless work. • Rubber-coated castor wheels and large back wheels. Jupiter code 0.065.0001 voltage 230V ~ 50Hz n°motors - power (max) 1 - 1100 W column depression 23 kPa/2300 mmH 2 O air suction 50 l/s total volume/dust/liquid 6,5 l./5 l./6 l. dimension/weight 55 x 35 x 63,5 cm/13 kg

68. 68 Vacuum cleaners Wet & dry vacuum cleaners PVC spacer Code 0.110.0021 Gangway tool (only for liquid suction) Code 0.110.0062 Ø 40 Gangway tool (only for Windy 378 IR model) A set made of special accessory with front and back squeegee + a flex connection hose in order to vacuum easily and quickly water and liquid from the floor. 0.911.0210 front squeegee strip with hole 0.911.0211 rear squeegee strip without hole Ø 40 Spacer for plastic bag 58 l. (for Windy 278 PF - 278 IF - 378 PF - 378 IR models) This accessory is necessary when using collector bag: the use of collector bag is not possible without PVC spacer. The use of the collector bag grants easy filter cleaning and its quick replacement whenever necessary, saving time also during the operation of tank cleaning.

86. 86 Floor scrubber driers Speed • Suitable to work in high congested areas like wellness centres and medical environments in general, gyms, retail outlets, car shops, sales points and health care • Solution water filter and solenoid valve (battery model only) • User friendly control panel • Hour meter (optional) • Recovery water tank with visual inspection • Reclining handle with control lever (battery model only) • Low noise operation thanks to the protected positioning of vacuum motor • Recovery tank drain hose with adjustable flow system • Indicator of the solution water tank fill level • Easy access to the recovery tank • Non-marking wheels. Walk-behind floor scrubber driers Standard equipment: • 5.511.1688 PP brush Ø 430 mm - 17" • 0.108.0042 On-board Battery charger 24V 10A only for model code: 8.524.1002 8.524.0002 • 4.508.X468 Front squeegee blade L.830 mm Shore 40 Th. 2,5 mm • 4.508.X467 Rear squeegee blade L.870 mm Shore 40 Th. 3 mm Speed 45E Speed 45B Speed 45B code 8.524.3302 8.524.1002 8.524.0002 power supply 230 V - 50 Hz 24V (battery charger included) 24V (batteries and charger included) scrubbing/squeegee width 430/800 mm 430/800 mm 430/800 mm max working capacity 1575 m²/h 1575 m²/h 1575 m²/h solution tank capacity 25 l/6.61 gal 25 l/6.61 gal 25 l/6.61 gal recovery tank capacity 25-28 l/6.61 gal 25-28 l/6.61 gal 25-28 l/6.61 gal traction mechanical mechanical mechanical RPM/pressure on the brushes 140/25 kg/39,68 lbs 150/18 kg/39,68 lbs 150/18 kg/39,68 lbs brush motor power 550 W 450 W 450 W detergent solution system mechanical solenoid valve solenoid valve depression/vacuum motor 1100 mmH 2 O/400 W 1100 mmH 2 O/370 W 1100 mmH 2 O/370 W dimensions/weight 106x50x88 cm/76 kg 106x50x88 cm/76kg 106x50x88 cm/117kg Watch the video on youtube: www.youtube.com/lavorpro • 2 x 0.107.0061 Maintenance free battery 12 MFP 50 - 12V 50Ah only for model code: 8.524.0002

127. 127 Steam generators Vacuum steam generators Unlimited autonomy thanks to the continuous power supply of the boiler, which enables water top-ups in the tank without having to stop the machine or interrupt work. Hot air output blow function for quick drying of car interiors with a 2 m flexible hose and flat nozzle supplied. Discharge pipe to quickly drain dirty water collected without removing the head. Two-stage bypass vacuum motor with cyclone effect. Fields of applications Steam system: Food & beverage (food industry, catering, beverage, winery). Hospitality, community & healthcare (hospitality, buildings cleaning, spa & sport, education & community, healthcare). Industry (industry, transportation, car washers, car dealers). New simple and intuitive control panel, quick-coupling steam gun, main ON/OFF switch with lamp, boiler ON/OFF switch with lamp, steam/detergent regulator/selector, steam flow rate regulator, steam ready warning lamp, low level water indicator lamp with buzzer, steam pressure gauge. Gun with integrated start-up control, adjustment of the vacuum power and steam function activation key. Equipped with 3 pumps: boiler, detergent and water. Maximum safety thanks to the 2 safety thermostats, 1 pressure switch and 1 mechanical maximum pressure valve.

144. 7.199.1305 - rev 00 - 01-2018 LAVORWASH S.p.A. J.F.Kennedy, 12 - 46020 Pegognaga (MN) Italy - Tel. +39 0376 55431 - Fax +39 0376 558927 E-mail: info@lavorpro.com - WebSite: www.lavorpro.com Watch the video on youtube: www.youtube.com/lavortv www.youtube.com/lavorpro Lavorwash is Official Sponsor of Pallacanestro Reggiana Italian A Series Basketball league.

12. 12 High pressure cleaners Cold water high-pressure cleaner Vanguard line Alaska XP Standard equipment: • 6.001.0107 Gun M22 • 6.002.0322 Lance M22. • 5.012.0478 High pressure nozzle set • 4.018.0003 High pressure hose 8 m • Power cable 5 m Optional: • 3.749.0472 ROTOX head Equipped with: • Three steel pistons, brass axial pump head with built-in by-pass valve. • Total Stop. • Suction and delivery S. S. valves. • Detergent built-in tank for indirect suction. • Power cable holder. • Accessory holder. • Ergonomic handle. • 1lt detergent tank. Alaska 1409 XP code 8.669.0001 operat. pressure/max 140/180 bar - 2030/2610 psi delivery rate 540 l/h - 2.4 GPM abs. power/voltage 2800 W - 230 V ~ 50 Hz - 1 ph Motorpump type/RPM MPBX1/2800 RPM max. water inlet temperature 40 °C dimension/weight 35 x 40 h 96 - 28 Kg - 61,6 lbs

131. 131 Steam generators Steam generators Unlimited autonomy thanks to the continuous power supply of the boiler, which enables water top-ups in the tank without having to stop the machine or interrupt work, with major time saving in the operating phase. Boiler with saturated steam at 9 bar at a temperature of 175°C. Equipped with 3 pumps: boiler, detergent and water. Maximum safety thanks to the 1 safety thermostat, 1 pressure switch and Fields of applications Steam system: Foo d & beverage (food industry, catering, beverage, winery). Hospitality, community & healthcare (hospitality, buildings cleaning, spa & sport, education & community, healthcare). Industry (industry, transportation, car washers, car dealers). Simple and intuitive control panel, quick-coupling steam gun, main ON/OFF switch with lamp, boiler ON/OFF switch with lamp, water/detergent selector, steam flow rate regulator, steam ready indicator lamp, low water level indicator lamp with buzzer, steam pressure gauge. Steam gun with integrated steam/detergent function activation key and quick coupling of accessories. 1 mechanical maximum pressure valve. Discharge valve for complete discharge of the boiler; it eliminates water residues and formation of lime scale, thus lengthening the lifespan of the boiler. A 5-litre water and detergent double tank. A rich and complete range of accessories is supplied. Fieldswater and scale growth, extending boiler’s life.

133. 133 Steam generators Steam generators Boiler draining key. Unlimited autonomy thanks to the continuous power supply of the boiler, which enables water top-ups in the tank without having to stop the machine or interrupt work, with major time saving in the operating phase. Boiler with saturated steam at 9 bar at a temperature of 175°C. Equipped with 2 pumps: boiler and detergent. Maximum safety thanks to the 1 safety thermostat, 1 pressure switch and 1 Fields of applications Steam system: Steam system: Food & beverage (food industry, catering, beverage, winery). Hospitality, community & healthcare (hospitality, buildings cleaning, spa & sport, education & community, healthcare). Industry (industry, transportation, car washers, car dealers). Simple and intuitive control panel, quick-coupling steam gun, main ON/OFF switch with lamp, boiler resistance activation lamp, steam flow rate regulator, steam ready indicator lamp, steam pressure gauge. Steam gun with integrated steam/ detergent function activation key and quick coupling of accessories. Boiler no water safety stop sensor. No water and water tank full lamp. Water pump activation lamp. Detergent pump activation lamp. Water/detergent selector key. mechanical maximum pressure valve. Discharge valve for complete discharge of the boiler; it eliminates water residues and formation of lime scale, thus lengthening the lifespan of the boiler. Equipped with 4 pivoting wheels suitable for food environments. A 5-litre water and detergent double tank. A rich and complete range of accessories is supplied.

135. 135 Steam generators Steam generators Boiler draining key. Unlimited autonomy thanks to the continuous power supply of the boiler, which enables water top-ups in the tank without having to stop the machine or interrupt work, with major time saving in the operating phase. Boiler with saturated steam at 9 bar at a temperature of 175°C. Equipped with 2 pumps: boiler and detergent. Maximum safety thanks to the 1 safety thermostat, 1 pressure switch and 1 Fields of applications Steam system: Steam system: Food & beverage (food industry, catering, beverage, winery). Hospitality, community & healthcare (hospitality, buildings cleaning, spa & sport, education & community, healthcare). Industry (industry, transportation, car washers, car dealers). Simple and intuitive control panel, quick-coupling steam gun, main ON/OFF switch with lamp, boiler resistance activation lamp, steam flow rate regulator, steam ready indicator lamp, steam pressure gauge. Steam gun with integrated steam/ detergent function activation key and quick coupling of accessories. Boiler no water safety stop sensor. No water and water tank full lamp. Water pump activation lamp. Detergent pump activation lamp. Water/detergent selector key. mechanical maximum pressure valve. Discharge valve for complete discharge of the boiler; it eliminates water residues and formation of lime scale, thus lengthening the lifespan of the boiler. Equipped with 4 pivoting wheels suitable for food environments. A 10l water and 5l detergent double tank. A rich and complete range of accessories is supplied.

20. 20 High pressure cleaners Mystic-R XP Equipped with: • Three steel pistons, brass axial pump head with built-in by-pass valve. • Suction and delivery S. S. valves. • Detergent built-in tank for indirect suction. • Glicerine pressure gauge. • Hose holder. • Accessory holder. • Ergonomic handle. Optional: • 6.608.0071 High-pressure wall mount hose reel (hose not included) • 3.749.0472 Rotox nozzle head Mystic-R 1409 XP code 8.661.0703 operat. pressure/max 140/180 bar - 2030/2610 psi delivery rate 540 l/h - 2.4 GPM abs. power/voltage 2800 W - 230 V ~ 50 Hz - 1 ph pump type/RPM MPBX1/2800 RPM max. water inlet temperature 40 °C dimension/weight 43x50x85cm/28 Kg - 61,6 lbs Cold water high-pressure cleaner Heritage line Standard equipment: • 6.001.0107 Gun M22 • 6.002.0322 Lance M22. • 5.012.0478 High pressure nozzle set • 4.018.0003 High pressure hose 8 m • Power cable 5 m

55. 55 Vacuum cleaners Wet & dry vacuum cleaners Windy 120 IF Equipped with: • High efficiency by pass motor. • Suction system with by-pass cooling. • S. S. tank. • Shock proof trolley. • Liquid float valve. • Cloth filter. • 7,5 m power cable. • Accessories Ø 35. • Handy accessory holder. Windy 120 IF code 8.249.0001 voltage 220-240V ~ 50-60Hz n°motors - power (max) 1 - 1200 (1400) W column depression 24 kPa/2400 mmH 2 O air suction 65 l/s total volume/dust/liquid 20 l./14 l./16 l. dimension/weight 35x35x66 cm/8 Kg Optional: • code. 5.212.0022 Paper collector filter set - 10 pcs • code. 5.212.0043 Cloth filter • code. 3.754.0205 Brush flor/carpet with wheels • code. 3.754.0081 Brush carpet Turbo brush Type 2 • code. 5.212.0157 Cartridge filter • code. 5.212.0158 HEPA filter • code. 5.212.0155 Washable filter • 5.209.0077 Hose 2,5 m • 6.205.0109 • 3.754.0005 • 3.754.0004 • 3.754.0169 • 3.754.0170 • Power cable 7,5 m 300 mm • 3.754.0168 • 3.754.0015 • 3.752.0175 • 3.752.0114 Standard equipment: • 5.209.0009

48. 48 Vacuum cleaners Dry vacuum cleaners/wet & dry vacuum cleaners and Injection extraction F = Fixed R = Tilting P = Plastic I = Stainless steel Windy 365 IF Nomenclature Windy 120 IF Windy 265 PF Windy 130 IF Windy 265 IF Silent FR Silent Code Model Page Voltage Motor power Column depression Air suction Tank capacity Noise level Packaging L x l x H Packaging weight Packaging weight Pieces for pallet V - Hz W/W max kPa/mmH 2 O l/s l 76 dB (A) cm kg lbs N° 8.246.0007 SILENT FR 50 220/240V - 50/60Hz 800/1000 24/2400 44 l/s 12 l 78 dB (A) 39x37x47 7,4 16 30 8.246.0001 SILENT 51 220/240V - 50/60Hz 800/900 24/2400 44 l/s 12 l 72 dB (A) 39x39x42 7,4 16 30 0.052.0004 PRO WORKER 52 220/240V - 50/60Hz 1200/1400 24/2400 70 l/s 30 l 75 dB (A) 51x36x56 11 24 16 8.249.0001 WINDY 120 IF 55 220/240V - 50/60Hz 1200/1400 24/2400 65 l/s 20 l 79 dB (A) 39x40x54 10 22 24 8.250.0001 WINDY 130 IF 56 220/240V - 50/60Hz 1200/1400 24/2400 65 l/s 30 l 79 dB (A) 39x40x79 11 24 15 8.239.0008 WINDY 265 PF 57 220/240V - 50/60Hz 2000/2400 22/2200 130 l/s 65 l 79 dB (A) 60x48x87 18,8 41 8 8.239.0001 WINDY 265 IF 58 220/240V - 50/60Hz 2000/2400 22/2200 130 l/s 65 l 79 dB (A) 60x48x87 19,8 44 8 Tank capacity (litres) Number of motors Pro Worker

96. 96 Floor scrubber driers Midi-R • Capable to work for the maintenance and deep cleaning of large areas (up to 2.600 m²) • User friendly control panel: forward speed setting, scrubbing and vacuuming selectors, battery charge indicator, traction direction indicator, key main switch • Large handle with traction driving lever for forward and backward directions • Self levelling brush plate • Cover removable without tools • Quick vacuum motor and filter inspection, without tools • Detergent solution filter • Detergent solution tank provided with large opening protected by quick locking cap. Walk-behind floor scrubber driers Standard equipment: Midi-R 75BT code 8.517.0105 power supply 24V scrubbing/squeegee width 750/900 mm max working capacity 4275 m²/h solution tank capacity 88 l/23.25 gal recovery tank capacity 91-95 l/24.04-25 gal traction type/power automatic/300 W RPM - pressure on the brushes 150 - 48,5 kg/107.48 lbs brush motor power 1000 W detergent solution system solenoid valve depression/vacuum motor 1733 mmH 2 O/550 W dimensions/weight 133x73x117 cm/150 kg • 4.508.0646 Front squeegee blade L.925 mm Shore 40 Th. 3 mm • 4.508.0605 Rear squeegee blade L.1015 mm Shore 30 Th. 4 mm • 2 x 5.511.1168 PP brush Ø 360 mm - 14" Midi-R 75BT

99. 99 Floor scrubber driers User friendly control panel. Steering wheel with digital controls and display. Squeegee and brush plate mechanical and user friendly lifting lever: min. maintenance cost training time for the users. Scrubbing unit with double brush with brush plate made of steel for a great pressure (32 Kg.) on the floor resulting in an easy and deep cleaning of any kind of dirt. The comfortable and ergonomic seat allows the operator to work effortless for a long time, improving productivity. Its very compact size make it perfect to work in small areas where walk behind models are usually used. The use of XXS makes working easier and quicker with a huge saving of time. Great working autonomy thanks to the possibility to use 4 batteries 6 V 180 Ah granting continuous working up. Possibility to use also 2 batteries 12V. Less battery consumption thanks to rear wheel- drive. Large load tanks made of shock and acid proof polyethylene (real load of 85 l.), avoiding frequent stop for refilling. Rear wheel-drive on 2 wheels allows the machine to get over remarkable slopes . Detergent solution is cleansed by an external completely accessible filter, that holds any impurities, thus protecting the solenoid valve. The easy access to all internal components of XXS make it possible to reduce maintenance cost. Detergent tank 2lt. Optional accessories: • 2 x 0.107.0002 Tubular battery Pb-acid 12V 118 Ah C5 • 4 x 0.107.0004 Tubular battery Pb-acid 6V 180Ah C20 + 2 x 5.511.0561 connection cable batteries • 0.108.0002 Battery charger 24V 25A 220-240/50-60 • 4.508.1594 Polyurethane front blade L.960 TH.3 Sh.40 • 4.508.1596 Polyurethane rear blade L.1000 TH.4 Sh.40 • 6.508.0030 - Ø 340 mm - 13"- beige (5 pcs.) • 6.508.0037 - Ø 340 mm - 13"- green (5 pcs.) • 6.508.0044 - Ø 340 mm - 13"- black (5 pcs.) • 2 x 5.511.1106 Tynex brush Ø 330 mm-13" • 2 x 5.511.1255 PP 0,03 brush Ø 330 mm-13” • 2 x 5.511.1202 PES brush Ø 330 mm - 13” • 2 x 5.511.1107 EWU pad driver Ø 330 mm-13" Ride-on floor scrubber driers • 6 .505.0062 Flashing light • 4 x 0.107.0072 Gel battery 6 MFP 180 6V 180Ah C5 + 2 x 5.511.0561 connection cable batteries

10. 10 High pressure cleaners Vanguard line is our line of products aimed to professional customers who seek , in addition to the robustness that distinguishes the LAVORPRO brand, design and ergonomics result of years of R & D study. Each model is equipped with large wheels for easy transport, accessories storage facility, plastic shockproof structures and quiet operation. The range includes two models 2800 rpm (Alaska and LMX) and 3 models 1450 rpm (Arizona, Tucson and Tucson XL) meeting all customer needs. Being Manufacturers: from experience to knowledge In the high-pressure cleaners market companies are divided in those who buy components to assemble products and manufacturers, who have a continuous R&D on all product components. Lavorwash manufactures all the high-pressure cleaners components entirely and this allows: to spread product knowledge, culture and experience inside the company; to check the entire manufacturing cycle; to adopt possible improvements immediately; better sensitivity to market request adjusting product range design in real time. What high pressure cleaner? Is it better pressure or delivery rate? The right criteria to define the high-pressure cleaner performances is the washing effectiveness. The elements that influence this value are: delivery rate (water volume processed by the pump in a unity of time) and pressure (l/h water power on a surface). The higher the delivery rate, the faster the washing Cold water high-pressure cleaner Vanguard line phase (less rinsing time); the higher the pressure, the deeper the washing (better dirt degreasing). It is often emphasized the pressure only (also because the pump size and the consequent manufacturing cost are cheaper), but delivery rate is as important as pressure. What pump? Is it better a linear (crankshaft) or an axial one? It does not exist a winning technology, because both solution can provide same performances and VANGUARD LINE

13. 13 High pressure cleaners High pressure cleaners LMX XP Equipped with: • Three ceramic coated pistons, brass axial pump head with built-in by-pass valve. • Total Stop. • Suction and delivery S. S. valves. • Detergent built-in tank for indirect suction. • Pressure regulator. • Glicerine pressure gauge. • Hose reel. • Accessory holder. • Ergonomic handle. • 7,5 lt. detergent tank. Standard equipment: • 3.700.0036 Gun M22 - 3/8. • 3.701.0027 Lance M22 high/low pressure (mod. 1211 XP) • 6.602.0026 Lance M22 high/low pressure with nozzle (mod. 2007 XP) • 3.103.0050 Nozzle type 045 (mod. 1211 XP) • 4.618.0053 High pressure hose 10 m • Power cable 5 m LMX 1211 XP LMX 2007 XP code 8.613.0001 8.613.0015 operat. pressure/max 120/150 bar-1740/2175 psi 200/220 bar-2900/3190 psi delivery rate 660 l/h-2.91 GPM 420 l/h-1.85 GPM abs. power/voltage 3300W - 230V~50Hz 1 ph 3300W - 230V~50Hz 1 ph motorpump type/RPM MPBX2/2800 RPM MPBX2/2800 RPM max. water inlet temperature 40 °C 40 °C dimension/weight 59x37x87cm/28 Kg - 61,6 lbs 59x37x87cm/28 Kg - 61,6 lbs Cold water high-pressure cleaner Vanguard line

71. 71 Industrial vacuum cleaners Industrial Wet & dry vacuum cleaners S = Universal (motor) D = Induction (motor) Liters (tank) n° Motor x 100 =2400 W Filter shaker M = Single phase (motor) T = Tri-Phase (motor) V = Varnishing (tank) X = S. S. (tank) SMX 77 2-24 S Nomenclature SMX77 2-24 SMX77 3-36 DMX80 1-22 S DTX 80 1-30 S Code Model Page Voltage Abs. Power Column depression Suction air Tank capacity Noise level Filtering surface Packaging Packaging weight Packaging weight Pieces for pallet V~Hz (Ph) W kPa l/s l dB(A) cm² cm L x l x H kg lbs n° 0.056.0002 SMX77 2-24 72 230 V~50-60 Hz (1Ph) 2000 24 kPa 108 l/s 77 l. 74 dB(A) 4300 cm² 70x91x141 66 145,5 1 0.056.0004 SMX77 3-36 72 230 V~50-60 Hz (1Ph) 3000 24 kPa 162 l/s 77 l. 76 dB(A) 4300 cm² 70x91x141 67 147,7 1 0.045.0031 DMX 80 1-22 S 73 230 V~50 Hz (1Ph) 2200 32 kPa 97 l/s 80 l. <74 dB(A) 4300 cm² 50x50x140 80 176 1 0.045.0032 DTX 80 1-30 S 73 400 V~50 Hz (3Ph) 3000 32 kPa 97 l/s 80 l. <74 dB(A) 4300 cm² 50x50x140 85 187 1

73. 73 Industrial vacuum cleaners Industrial Wet & dry vacuum cleaners Optional: Standard equipment: DMX80 1-22 S DTX80 1-30 S code 0.045.0031 0.045.0032 abs. power W 2200 3000 n°/type motor 1x induction 1x induction column depression 21 kPa (2100 mmH2O) 32 kPa (3200 mmH2O) suction air 97 l/s 97 l/s tank volume/dust capacity/liquid capacity 80/36/49 lt 80/36/49 lt noise level 74 dB(A) 74 dB(A) voltage 230 V~50 Hz (1Ph) 400 V~50 Hz (3Ph) filtering surface 4300 cm² 4300 cm² filtering capacity 5 μm 5 μm cable lenght 10 m 10 m dimensions/weight 50x50x140cm/80Kg -176 lbs 50x50x140cm/85Kg -187 lbs DMX80 DTX80 • Kit 6.205.0115 Steel curve + pipe Ø 40 Round brush Ø 40 Accesories holder Ø 40 Floor Brush Wet tool Carpet tool 400 mm • Flexible hose ø 40 - 3 m code 5.209.0159 (Manual) • Cloth filter code 5.509.0039 • Washable filter 5.212.0021 Equipped with: • IP 65 silenced turbine motor. • Liquid float valve. • S. S. tank. • Manual filter shaker. • Professional closing hooks. • Static electric shock inhibitor. • Non-overturning steel structure. • Drain hose system. • Epoxy varnishing. • Steering wheels with brake. • Air intake safety valves for turbine motor protection. • Flat lance ø 40 code 3.754.0048

122. 122 Steam generators Steam generators GV Kone Equipped with: • Satured steam at 4 bar at a temperature of 143°C • Boiler 2,3 kW • Heating and activation time required: 10 min • Pressure switch • Double thermostat • Cap with protection against anti-unscrewing and safety valve • Handy accessory compartment with electric cable holder • Control panel with lamps • Impact resistant covers • Steam regulation • Thermometer • Power cable 6 m. Standard equipment: • Hose 2,8 m • 2x 6.402.0078 • 6.402.0003 • 6.402.0004 • 6.402.0006 • 6.402.0005 • 6.402.0040 • 6.402.0009 • 3.099.1053 • 3.099.1052 • 3.099.0126 • 3.099.0189 • 0.010.0028 Antiscale sachet 50gr GV Kone Code 8.404.0051 Max steam pressure/temperature 4 bar/143° C Boiler absorbed power 2300 W/220-240V ~ 50Hz Steam production 80 kg/h max Boiler type/volume Alluminium/2,4 l

17. 17 High pressure cleaners Tucson XL LP Standard equipment: • 3.700.0030 Gun M22 - 3/8 with rotating coupling ). • 3.701.0027 Lance M22 high/low pressure • 3.103.0050 Nozzle type 045 (mod. 2015 LP) • 3.103.0055 Nozzle type 070 (mod. 2021 LP) • 3.103.0049 Nozzle type 040 (mod. 2515 LP) • 4.618.0054 High pressure hose 10 m • Power cable 5 m Equipped with: • 4 poles electrical motor (1450 RPM) with thermal protection and water cooling. • Three full ceramic pistons , brass linear pump head with by-pass valve. • Low voltage and delayed Total Stop. • Suction and delivery S. S. valves. • Detergent built-in tank for indirect suction (2,8 lt.). • Pressure regulator. • Glicerine pressure gauge. Tucson XL 2015 LP Tucson XL 2021 LP Tucson XL 2515 LP code 8.672.0001 8.672.0002 8.672.0003 operat. pressure 200 bar-2900 psi 200 bar-2900 psi 250 bar-3600 psi delivery rate 900 l/h-3.96 GPM 1260 l/h-5.55 GPM 900 l/h-3.96 GPM abs. power/voltage 7000W - 400V~50Hz 3ph 9400W - 400V~50Hz 3ph 9400W - 400V~50Hz 3ph pump type/RPM MPW5/1450 RPM MPW5/1450 RPM MPW5/1450 RPM max. water inlet temperature 40 °C 40 °C 40 °C dimension/weight 61x40x91cm/69 Kg - 152 lbs 61x40x91cm/70 Kg - 154 lbs 61x40x91cm/70 Kg - 154 lbs High pressure cleaners Cold water high-pressure cleaner Vanguard line 1450 NEW

53. 53 Vacuum cleaners Standard equipment: Wet & Dry vacuum cleaner with power tool socket with remote control and automatic filter shaker PRO Worker EM Equipped with: • 1 by pass high efficiency motors • Suction system with by-pass cooling • Power tool socket (max 2200 W) • Automatic ON/OFF filter shaker • Shock proof tank (PP) • Liquid float valve • Dirty filter indicator • Rotary switch • M/E10 filter • Microfiber collector filter • M/E10 suction filter with NANO TECH coating • Extension steel pipe • Multidiameter tool adapter • Traceless wheels • Accessories Ø35. PRO Worker EM code 0.052.0004 voltage 220-240V ~ 50-60Hz n°motors - power 1 - 1400 W column depression 24 kPa/2400 mmH 2 O air suction 70 l/s volume 30 l. dimension/weight 51x36x56 cm/11 kg • 0.952.0058 + 3.753.0003 AUTOMA TIC ON/OFF MA X 2200 W • 6.205.0109 • 3.754.0168 • 3.754.0169 • 3.754.0170 • 3.754.0005 • 4.208.0063 • 0.952.0054 • 2x 3.752.0292 • 0.952.0055 • 0.952.0056 • 0.952.0057 • 7.5 m neoprene power cable Optional: • code. 5.212.0165 Microfiber collector filter set (5 pcs) Watch the video on youtube: www.youtube.com/lavorpro Wet & dry vacuum cleaners

56. 56 Vacuum cleaners Windy 130 IF Equipped with: • High efficiency by pass motor. • Suction system with by-pass cooling. • S. S. tank. • Shock proof trolley. • Liquid float valve. • Washable filter. • 7,5 m power cable. • Accessories Ø 35. • Handy accessory holder. Windy 130 IF code 8.250.0001 voltage 220-240V ~ 50-60Hz n°motors - power (max) 1 - 1200 (1400) W column depression 24 kPa/2400 mmH 2 O air suction 65 l/s total volume/dust/liquid 30 l./15 l./17 l. dimension/weight 37x37x71 cm/8,5 Kg Optional: • code. 5.212.0022 Paper collector filter set - 10 pcs • code. 5.212.0043 Cloth filter • code. 3.754.0205 Brush flor/carpet with wheels • code. 3.754.0081 Brush carpet Turbo brush Type 2 • code. 5.212.0157 Cartridge filter • code. 5.212.0158 HEPA filter • 5.209.0077 Hose 2,5 m • 6.205.0109 • 3.754.0005 • 3.754.0004 • 3.754.0169 • 3.754.0170 • Power cable 7,5 m 300 mm • 3.754.0168 • 3.754.0015 • 3.752.0175 • 3.752.0114 Standard equipment: • 5.212.0155 Wet & dry vacuum cleaners

57. 57 Vacuum cleaners Standard equipment: • 5.209.0021 Hose 2,5 m • 6.205.0126 • 3.754.0048 • 3.754.0049 • 3.754.0083 • 3.754.0084 • 3.754.0085 • 6.205.0151 • Power cable 7,5 m Windy 265 PF Equipped with: • 2 high efficiency by pass motors. • Suction system with by-pass cooling. • Filter cleaning system. • Plastic tank (PP). • Shock proof trolley. • Liquid float valve. • Cloth filter. • 7,5 m power cable. • Traceless wheels. • Accessories Ø 40. • Handy accessory holder. Optional: • code. 5.212.0022 Paper collector filter set - 10 pcs • code. 5.209.0177 Cloth filter for fine dust • code. 5.212.0093 Nylon filter 400 mm Windy 265 PF code 8.239.0008 voltage 220-240V ~ 50-60Hz n°motors - power (max) 2 - 2000 (2400) W column depression 22 kPa/2200 mmH 2 O air suction 130 l/s total volume/dust/liquid 65 l./30 l./40 l. dimension/weight 44x46x96 cm/13 kg Watch the video on youtube: www.youtube.com/lavorpro Wet & dry vacuum cleaners

58. 58 Vacuum cleaners Standard equipment: • 5.209.0021 Hose 2,5 m • 6.205.0126 • 3.754.0048 • 3.754.0049 • 3.754.0083 • 3.754.0084 • 3.754.0085 • 6.205.0151 • Power cable 7,5 m Windy 265 IF Equipped with: • 2 high efficiency by pass motors. • Suction system with by-pass cooling. • Filter cleaning system. • S. S. tank. • Static electric shock inhibitor. • Shock proof trolley. • Liquid float valve. • Cloth filter. • 7,5 m power cable. • Traceless wheels. • Accessories Ø 40. • Handy accessory holder. Optional: • code. 5.212.0022 Paper collector filter set - 10 pcs • code. 5.209.0177 Cloth filter for fine dust • code. 5.212.0093 Nylon filter 400 mm Windy 265 IF code 8.239.0001 voltage 220-240V ~ 50-60Hz n°motors - power (max) 2 - 2000 (2400) W column depression 22 kPa/2200 mmH 2 O air suction 130 l/s total volume/dust/liquid 65 l./30 l./40 l. dimension/weight 44x46x96 cm/14,5 kg Watch the video on youtube: www.youtube.com/lavorpro Wet & dry vacuum cleaners

59. 59 Vacuum cleaners Windy 365 IR Equipped with: • 3 high efficiency by pass motors. • Suction system with by-pass cooling. • Filter cleaning system. • S. S. tank. • Static electric shock inhibitor. • Tilting tank. • Fully removable tank. • Shock proof trolley. • Liquid float valve. • Cloth filter. • 7,5 m power cable. • Traceless wheels. • Accessories Ø 40. • Handy accessory holder. Optional: • code. 5.212.0022 Paper collector filter set - 10 pcs • code. 5.209.0177 Cloth filter for fine dust • code. 5.212.0093 Nylon filter Standard equipment: • 5.209.0021 Hose 2,5 m • 6.205.0126 • 3.754.0048 • 3.754.0049 • 3.754.0083 • 3.754.0084 • 3.754.0085 • 6.205.0151 • Power cable 7,5 m 400 mm Windy 365 IR code 8.240.0001 voltage 220-240V ~ 50-60Hz n°motors - power (max) 3 - 3000 (3600) W column depression 22 kPa/2200 mmH 2 O air suction 195 l/s total volume/dust/liquid 65 l./30 l./40 l. dimension/weight 62x51x100 cm/20 kg Watch the video on youtube: www.youtube.com/lavorpro Wet & dry vacuum cleaners

90. 90 Floor scrubber driers Free Evo • Very compact scrubbing machines suitable to work for the maintenance cleaning of limited-size areas (up to 1.500 m²) • Especially suitable for cleaning: car shops, sales points, gym, health care • Control panel with operator presence safety system • Low level battery indicator: brush/vacuum and traction progressive cut off • Solution water filter and solenoid valve • Easy access to the battery compartment • Quick drain and easily inspectable recovery tank • Non-marking wheels • Roto-molded polyethylene tanks, shock and acid resistant • The lower tank also serves as battery compartment • Low noise operation thanks to the protected positioning of vacuum motor. Walk-behind floor scrubber driers Standard equipment: • 5.511.1097 PP brush Ø 483 mm - 19" • 0.108.0042 On-board Battery charger 24V 10A only for model code: 8.527.0001 - 8.527.0002 8.527.0010 - 8.527.0012 • 4.508.X468 Front squeegee blade L.830 mm Shore 40 Th. 2.5 mm • 4.508.X467 Rear squeegee blade L.870 mm Shore 40 Th. 3 mm Free Evo 50E Free Evo 50B Free Evo 50B Free Evo 50BT Free Evo 50BT code 8.527.0003 8.527.0004 8.527.0001 8.527.0011 8.527.0002 power supply 230 V - 50 Hz 24V 24V (battery charger included) 24V 24V (battery charger included) scrubbing/squeegee width 500/800 mm 500/800 mm 500/800 mm 500/800 mm 500/800 mm max working capacity 2000 m²/h 2000 m²/h 2000 m²/h 2000 m²/h 2000 m²/h solution tank capacity 44 l/11,63 gal 44 l/11,63 gal 44 l/11,63 gal 44 l/11,63 gal 44 l/11,63 gal recovery tank capacity 50-60 l/13,21-16 gal 50-60 l/13,21-16 gal 50-60 l/13,21-16 gal 50-60 l/13,21-16 gal 50-60 l/13,21-16 gal traction/traction motor mechanical mechanical mechanical automatic/150W automatic/150W RPM/pressure on the brushes 150/20 kg/44,09 lbs 150/18 kg/44,09 lbs 150/18 kg/44,09 lbs 150/18 kg/39,68 lbs 150/18 kg/44,09 lbs brush motor power 550W 550W 550W 550W 550W detergent solution system solenoid valve solenoid valve solenoid valve solenoid valve solenoid valve depression/vacuum motor 1700 mmH 2 O/800W 1280mmH2O/400W 1280 mmH 2 O/400W 1280 mmH 2 O/400W 1280 mmH 2 O/400W dimensions/weight 116x46x98cm/95 kg 116x51x98cm/62 kg 116x51x98cm/63 kg 116x51x98cm/66 kg 116x51x98cm/67 kg Other available versions: • 8.527.0010 - Free Evo 50B with batteries and battery charger • 8.527.0012 - Free Evo 50BT with batteries and battery charger Watch the video on youtube: www.youtube.com/lavorpro • 2 x 0.107.0054 Maintenance free battery 12V 75Ah BT DC 5.5 only for model code: 8.527.0010 - 8.527.0012

129. 129 Steam generators Vacuum steam generators with foam system steam/foam function activation key. Multipurpose machine: cleaning with detergent, steam, steam with detergent, foam and hot water. Equipped with a compres - sed air connection and pressure gauges for air and steam. Unlimited autonomy of steam thanks to the electronically con - trolled power supply of the boiler, which enables water top-ups in the tank without having to stop the machine or interrupt work. Fields of applications Steam system: Food & beverage (food industry, catering, beverage, winery). Hospitality, community & healthcare (hospitality, buildings cleaning, spa & sport, education & community, healthcare). Industry (industry, transportation, car washers, car dealers). Foam system: Car dealers, car washers, garages, car body shops, and every other place where a source of compressed air is already available New simple and intuitive control panel, quick-coupling steam gun, main ON/OFF switch with lamp, boiler ON/OFF switch with lamp, steam function/compressed air function selector, water/detergent selector, steam flow rate regulator, steam rea - dy indicator lamp, low water level indicator lamp with buzzer, steam pressure gauge, and air pressure gauge. Gun with inte - grated start-up control, adjustment of the vacuum power and Hot air output blow function for quick drying of car interiors with a 2 m flexible hose. Discharge pipe to quickly drain dirty water from the tank. Two-stage bypass vacuum motor. Equip - ped with 3 pumps: boiler, detergent and water. Maximum safety thanks to the 2 safety thermostats, 1 pressure switch and 1 mechanical maximum pressure valve + 1l LC prefoam.

136. 136 Page Product Capacity Recharging Working pressure Category Single packaging weight Single packaging weight Single packaging dimensions Pieces for pallet Pallet dimensions Code Model liters bar kg lbs cm L x l x H N° cm L x l x H 6.608.0074 FOAM BOX 137 Foam sprayer - Air operating 4 Box 3 kg 9,3 44x13x25 - - 0.006.0002 SPRAY NV24 138 Sprayer 24 Pneumatic 6 Trolley 17 kg 38 34x34x82 18 102x102x215 0.006.0003 SPRAY NV50 138 Sprayer 50 Pneumatic 6 Trolley 27 kg 60 47x47x107 12 141x107x205 0.006.0007 FOAMJET SV24 139 Foam sprayer 24 Air operating 6 Trolley 17 kg 38 34x34x82 18 102x102x215 0.006.0009 FOAMJET SX24 139 Foam sprayer 24 Air operating 6 Trolley 13 kg 29 34x34x82 18 102x102x215 0.006.0008 FOAMJET SV50 139 Foam sprayer 50 Air operating 6 Trolley 27 kg 60 47x47x107 12 141x107x205 0.006.0010 FOAMJET SX50 139 Foam sprayer 50 Air operating 6 Trolley 20 kg 44 47x47x107 12 141x107x205 Chemicals & Sprayers In order to complete the chemical products supply and to allow a better applicability and effectiveness, the sprayers are the perfect solution when supply wideness, use versatility and dosage saving are taken into consideration. They are split into two different categories: pneumatic charge and continuous pneumatic charge. Pneumatic charge sprayers need to be connected to an air compressor to charge the tank and allow the product vaporization without the connection to the air compressor. They work at high-pressures and so they use capacious steel or stainless steel tanks to allow a greater working autonomy. Continuous pneumatic foam sprayers need a permanent connection to an air compressor; in this way air mixes with the chemical product producing a soft and voluminous foam that persists on surfaces: with a little chemical product, it is possible to treat wider areas or tough dirt (also on ceilings, inclined and/or slippery walls). They work at high-pressure and so they use capacious steel or stainless steel tanks to allow a greater working autonomy. The chemical product spraying is a finishing phase of cleaning task with other machines. The choice of the right product considering the kind of cleaning task grants the best result, complying with the environment and the machine that sprays the chemical product. Our chemical products range has been conceived complying with the strictest rules protecting the environment and avoiding the indiscriminating use of products damaging the environment. The right measuring and respect of the instructions we suggest are the best balance of the economical and technical needs of each up-to-date and aware cleaning task.

21. 21 High pressure cleaners Standard equipment: • 6.001.0107 Gun M22 • 6.602.0062 Lance M22. • 4.618.0188 High pressure hose R1 10 m • 3.102.0011 water filter • Power cable 5 m Cold water high-pressure cleaner Heritage line 1450 Bolt LP Bolt 1510 LP code 8.668.0027C operat. pressure 150 bar-2175 psi delivery rate 540 l/h-2,37 GPM abs. power/voltage 2800W - 230V~50Hz 1 ph pump type/RPM MP4/1450 RPM max. water inlet temperature 40 °C dimension/weight 43x50x85cm/36 Kg - 79,3 lbs Equipped with: • Three ceramic coated pistons, brass linear pump head with built-in by-pass valve. • Total stop • Suction and delivery S. S. valves. • Integrated detergent suction with external suction probe • Pressure regulator. • Glicerine pressure gauge. • Accessory holder. • Ergonomic handle.

61. 61 Vacuum cleaners Standard equipment: • 5.209.0021 Hose 2,5 m • 6.205.0126 • 3.754.0048 • 3.754.0049 • 3.754.0083 • 3.754.0084 • 3.754.0085 • 5.509.2176 • Power cable 7,5 m Windy 278 IF Equipped with: • 2 high efficiency by pass motors. • Suction system with by-pass cooling. • Filter cleaning system. • S. S. tank. • Static electric shock inhibitor. • Shock proof trolley. • Liquid float valve. • Cloth filter. • 7,5 m power cable. • Traceless wheels. • Accessories Ø 40. • Handy accessory holder. Optional: • code. 5.212.0022 Paper collector filter set - 10 pcs • code. 5.509.1405 Cloth filter for fine dust • code. 5.212.0093 Nylon filter 400 mm Windy 278 IF code 8.247.0001 voltage 220-240V ~ 50-60Hz n°motors - power (max) 2 - 2000 (2400) W High efficiency motor. column depression 22 kPa/2200 mmH 2 O air suction 130 l/s total volume/dust/liquid 78 l./35 l./48 l. dimension/weight 62x51x96 cm/23 kg Watch the video on youtube: www.youtube.com/lavorpro Wet & dry vacuum cleaners

63. 63 Vacuum cleaners Windy 378 IR Equipped with: • 3 high efficiency by pass motors. • Suction system with by-pass cooling. • Filter cleaning system. • S. S. tank. • Static electric shock inhibitor. • Tilting tank. • Fully removable tank. • Shock proof trolley. • Liquid float valve. • Cloth filter. • 7,5 m power cable. • Traceless wheels. • Accessories Ø 40. • Handy accessory holder. Optional: • code. 5.212.0022 Paper collector filter set - 10 pcs • code. 5.509.1405 Cloth filter for fine dust • code. 5.212.0093 Nylon filter Standard equipment: • 5.209.0021 Hose 2,5 m • 6.205.0126 • 3.754.0048 • 3.754.0049 • 3.754.0083 • 3.754.0084 • 3.754.0085 • 5.509.2176 • Power cable 7,5 m 400 mm Windy 378 IR code 8.248.0001 voltage 220-240V ~ 50-60Hz n°motors - power (max) 3 - 3000 (3600) W High efficiency motor. column depression 22 kPa/2200 mmH 2 O air suction 195 l/s total volume/dust/liquid 78 l./35 l./48 l. dimension/weight 62x51x99 cm/26 kg Watch the video on youtube: www.youtube.com/lavorpro Wet & dry vacuum cleaners

76. 76 Floor scrubber driers Direct experience of professional people has resulted in Lavor PRO floor scrubbers range: easy to handle, powerful, efficient, carefully conceived and designed by using top- quality materials. Why cilindric brush? High speed rotation for a polishing effect; great dirt degrease in floors with grout ; possibility to link together the sweeping function; the rotation direction assists forwarding in models without traction. Why disc brush? Extended mechanical action of the bristles on the floor, ideal for persistent dirt: the special setting of the brush plate allows a balanced gripping effect, assisting easy use in the non traction models. Complete cleaning also next to walls is possible and the compact washing element lower at the sides is studied to scrub also under edges. How a squeegee should be designed? The shape and the material used grant a perfect drying in every condition, also on floors with grout or when quick U turns are necessary. The floating body can stay in the machine operating space (compact/room saving) The manual adjusting system grants a perfect drying on each kind of floors. How long do battery charges last? It is impossible to determine exactly how long a battery charge lasts and so how long a machine can work in autonomy. Battery autonomy changes depending on type of surface, dirt quantity, brush type and way in which traction system is used (speed and slope). Battery life is made up of number of charge cycles (also incomplete), if usage conditions, charging and  service are perfectly observed.  Manufacturing technology  diversifies numbers of cycles, service needed,  usage/charging conditions and performances. Floor scrubber-driers

112. 112 Sweepers BSW 651 M BSW 375 ET SWL 700 ST SWL 700 ET Page Type Traction Main brush width Main brush + 2 side brushes Collector tank Max working capacity Packaging dimensions Weight with packaging Weight with packaging Pcs x pallet Main brush + 1 side brush Code Model mm/inc mm/inc mm/inc lt/gal m 2 /foot 2 L x l x H cm/inc kg lbs n° 0.064.0001 BSW 375 ET 113 electric Manual 350/13,78 - 375/14,76 2/0,52 1000/10764 41x61x16/16x24x6 4,8 6,16 48 0.042.0101 BSW 651 M 114 manual Manual 500/19,68 700/27,56 - 40/10,58 1500/16146 78x77x44/31x30x17 25 55 5 0.061.0001 SWL 700 ET 115 electric Mechanical 510/20,08 680/26,77 - 45/11,89 2620/28201 126x63x85/50x25x34 78 172 1 0.061.0002 SWL 700 ST 116 gasoline motor Mechanical 510/20,08 680/26,77 - 45/11,89 2620/28201 126x63x85/50x25x34 77 169 1 Sweepers

114. 114 Sweepers BSW 651 M Equipped with: • Ideal for small and medium surfaces • Easy handling • Wide collector tank with safety lock • Side brush lifting • Main brush pressure regulation • Separate side brush • Adjustable working load on the brush • Tilting handle • 360° front wheel • Die casting brush arm • Traceless wheels • Shock proof frame • Hourly efficiency (max) 1500 m 2 /h. • Working area (1 side brush) 500-700 mm. Walk-behind sweepers Standard accessories: 0.942.0050 PP 0.942.0078 PP BSW 651 M code 0.042.0101 main brush width 500mm/19,68 inc main brush + 1 side brush width 700mm/27,56 inc collector tank/emptying system 40 lt -10,58 gal/manual max working capacity 1500 m 2 /h - 16146 ft 2 traction manual brushes transmission elastic belt pressure on the brushes adjustable side brush lifting arm system dust-laying system direct frame material steel dimension/weight 79 x 76 x 46 cm/25 kg Optional: 0.942.0079 Mixed steel side brush

118. 118 Steam generators GV series is suitable to degrease and sanificate any object or surface in an easy, ecological and definitive way. GV range is made up of electric generators, vacuum steam generators, vacuum steam generators with foam system. Ideal for food and baking industry, for private and institutional use, for pharmaceutical and mechanical industry, for dairy factories, for building sectors and so on. Performances: temperature, steam production and pressure The same remarks about pressure and delivery rate made for high-pressure cleaners, have to be taken into consideration also for steam generators; in this case, the important difference is the physical relationship (and so not subjective or debatable) that exists between steam pressure and its temperature: to a fixed pressure values correspond right and univocal temperature. Knowing these values it is easy to identify the ones (like us) who show the right double relation between pressure and temperature. Outlet steam temperature (not boiler temperature, that is higher) is important because there are natural limits (about 140°C) under which it is not possible to talk about sanification and so the purpose that led to the machine purchase (clearly wrong) could be unattended. Is it better a steam generator or a hot water high- pressure cleaner? As far as the choice is concerned, the aspects to be considered are the analysis of the task that must be done and all the elements that make up the cost of the operation, i.e. working speed (labour cost) and (more and more important) waste treatment (waste disposal cost). As far as the working speed is considered, it is important the whole cleaning procedure and not only the effective washing time: with the high-pressure cleaner it is not possible an indoor washing, unless there is a filled in collection system, instead it is necessary to move the washing phase outside; with the steam generator it is not necessary to move outside, i t is possible to wash the part exactly where it is, because the water generated can be easily dried. Steam generators

124. 124 Steam generators Vacuum steam generators GV Egon VAC Code 8.406.0015 Max steam pressure/temperature 5 bar/152° C Boiler absorbed power 1900 W/220/240V ~ 50Hz (Ph 1) Vacuum motor absorbed power 1200 (max 1400) W Column depression/Air flow 24 kPa/220 m³/h Recovery tank capacity 8 l GV Egon VAC Equipped with: • ABS body • Ready steam warning lamp • Boiler 1,9 kW S.S. AISI 304 • Low level water lamp indicator • Boiler is refilled continuously • Washable filter • Flex hose 2 m • Recovery tank capacity 8 l • Steam regulation • Wheels suitable for use in food processing area • ON/OFF main switch with indicator lamp • ON/OFF boiler switch with indicator lamp • Water filter • Pressure gauge. TUV certified for professional use Standard Equipment • 5.211.0090 • 3.753.0127 • 3.754.0204 • 3.754.0256 • 3.754.0255 • 3.754.0005 • 3.754.0271 • 3.754.0196 • 3.754.0215 • 3.754.0197 • 3.754.0109 • 3.754.0108 • 3.754.0110 • 3.754.0257 • 3.752.0123 • 3.754.0175 • 3.099.1108 • 6.402.0071 • 3.754.0121 • 6.402.0105

18. 18 "Less is more " is the philosophy that characterizes our HERITAGE range. All Heritage products are addressed to customers who want a high pressure cleaner with no compromises, equipped with metal trolley able to withstand shock and displacements. With Heritage we were able to combine the best of our technology and simple and durable frames, suitably treated to resist the weather condition and rustproof. Heritage provides two 2800 rpm model (MYSTIC and BOLT) and a 1450 rpm model in three versions (COLUMBIA R), and an entire range with combustion engines up to 13 horses. Being Manufacturers: from experience to knowledge In the high-pressure cleaners market companies are divided in those who buy components to assemble products and manufacturers, who have a continuous R&D on all product components. Lavorwash manufactures all the high-pressure cleaners components entirely and this allows: to spread product knowledge, culture and experience inside the company; to check the entire manufacturing cycle; to adopt possible improvements immediately; better sensitivity to market request adjusting product range design in real time. What high pressure cleaner? Is it better pressure or delivery rate? The right criteria to define the high-pressure cleaner performances is the washing effectiveness. The elements that influence this value are: delivery rate (water volume processed by the pump in a unity of time) and pressure (l/h water power on a surface). The higher the delivery rate, the faster the washing phase (less Cold water high-pressure cleaner Heritage line rinsing time); the higher the pressure, the deeper the washing (better dirt degreasing). It is often emphasized the pressure only (also because the pump size and the consequent manufacturing cost are cheaper), but delivery rate is as important as pressure. What pump? Is it better a linear (crankshaft) or an axial one? It does not exist a winning technology, because both solution can provide same performances and lifetime. What determines the pump quality is the quality of the project itself (linear or axial) and of the components used; for this reason Lavorwash decided to develop both technologies, taking into consideration a design that grants margin of safety and reliability. HERITAGE LINE

60. 60 Vacuum cleaners Standard equipment: • 5.209.0021 Hose 2,5 m • 6.205.0126 • 3.754.0048 • 3.754.0049 • 3.754.0083 • 3.754.0084 • 3.754.0085 • 5.509.2176 • Power cable 7,5 m Equipped with: • 2 high efficiency by pass motors. • Suction system with by-pass cooling. • Filter cleaning system. • Plastic tank (PP). • Shock proof trolley. • Liquid float valve. • Cloth filter. • 7,5 m power cable. • Traceless wheels. • Accessories Ø 40. • Handy accessory holder. Optional: • code. 5.212.0022 Paper collector filter set - 10 pcs • code. 5.509.1405 Cloth filter for fine dust • code. 5.212.0093 Nylon filter 400 mm Windy 278 PF code 8.247.0002 voltage 220-240V ~ 50-60Hz n°motors - power (max) 2 - 2000 (2400) W High efficiency motor. column depression 22 kPa/2200 mmH 2 O air suction 130 l/s total volume/dust/liquid 78 l./35 l./48 l. dimension/weight 62x51x96 cm/21,5 kg Watch the video on youtube: www.youtube.com/lavorpro Windy 278 PF Wet & dry vacuum cleaners NEW

88. 88 Floor scrubber driers Walk-behind floor scrubber driers • Ideal for small and medium floors up to 1600sqm, especially when congested by people or furnishing like in wellness centres, gyms, car showroom, retail shops, hospitals and schools. • Automatic brush attachment, discharge and delayed cut-off. • Adjustable solution release with automatic cut-off. • Narrow body with both side brush protrusion and 300° squeegee spin. • Tool less removable recovery tank with large visual inspection window and stretchable discharge hose. • Adjustable driving handle with dead man switches, soft touch controls and diagnosis (Eco Energy mode and battery low level automatic cut-off for DC version). • Large non marking working wheels and sturdy rear roller for displacements. Standard equipment: • 5.511.1941 PP brush Ø 430 mm - 17" • 0.108.0073 On-board Battery charger 24V 10A (only for model code: 8.580.0002/ 8.580.0003) • 4.508.1319 Front squeegee blade Shore 40 Th. 2,5 mm • 4.508.1320 Rear squeegee blade Shore 40 Th. 3,0 mm Dynamic 45E Dynamic 45B Dynamic 45B code 8.580.0001 8.580.0002 8.580.0003 power supply 230V 50Hz 24V (battery charger included) 24V (batteries and charger included) scrubbing/squeegee width 450/540 mm 450/540 mm 450/540 mm max working capacity 1600 m²/h 1600 m²/h 1600 m²/h solution tank capacity 30 l/7.92 gal 30 l/7.92 gal 30 l/7.92 gal recovery tank capacity 32-35 l/8.45 - 9.24 gal 32-35 l/8.45 - 9.24 gal 32-35 l/8.45 - 9.24 gal traction mechanical mechanical mechanical RPM/pressure on the brushes 150/18 kg/39,68 lbs 150/18 kg/39,68 lbs 150/18 kg/39,68 lbs brush motor power 300 W 400 W 400 W detergent solution system solenoid valve solenoid valve solenoid valve depression/vacuum motor 1200 mmH 2 O/800 W 1200 mmH 2 O/400 W 1200 mmH 2 O/400 W dimensions/weight 117x58x78 cm/66 kg 117x58x78 cm/53 kg 117x58x78 cm/94 kg Dynamic NEW Watch the video on youtube: www.youtube.com/lavorpro • 2 x 0.107.0061 Maintenance free battery 12 MFP 50 - 12V 50Ah only for model code: 8.580.0003

5. 5 Lavorwash has an extensive R&D program aimed at improving the performance, durability and quality of its products, as well as developing new models, accessories and services to meet the needs of a market with a high rate of innovation and technological change. We research the development of new products, as well as the improvement and optimization of existing models. Lavorwash tests its research: technical staff employs sophisticated and modern technological systems; products are subjected to continual functional and performance tests. Lavorwash creates attractive products, by combining innovative styling, reliability and ease of use in perfect harmony. We understand the importance of ergonomics: designers and technicians work in close collaboration to manufacture products which are easy to use, safe, efficient and truly stylish. Lavorwash has finalized advanced technologies, thanks to which every product is the result of a sophisticated manufacturing process. We use production lines equipped with automatic testing stations which immediately identify any problems or defects and the assembly systems ensure constant quality levels. Lavorwash supplies efficient and powerful systems ensuring high performance and the long life of the machines. Lavorwash pursues constant improvement and always sets itself new goals and targets. Wide-ranging and consolidated experience, constant commitment to research, advanced manufacturing processes and customer service are the features which have resulted in Lavorwash becoming a worldleader in cleaning systems. Lavorwash offers its customers consolidated and reliable support, becoming the ideal partner for a successful future. Investing in research and development also means making strides in terms of product quality and eco-sustainability. Whereas on the one hand, the improvement of our machines is aimed at meeting the practical needs of users, on the other hand this innovation is developed on the basis of an increasingly strong and shared environmental awareness. First of all, the use of high pressure cleaners allows for water savings of at least 80% when compared to a normal garden hose. Moreover, we developed vacuum cleaners using high efficiency motors to achieve top performances and reduce energy consumption by 50%.

25. 25 High pressure cleaners Cold water high-pressure cleaner with combustion engine Standard equipment: • 3.700.0036 Gun M22 - 3/8” • 6.002.0322 Lance M22 with nozzle-holder • 5.012.0282 High pressure nozzle set • 4.618.0012 High pressure hose 10 m Thermic 9 L Optional: • 5.012.0319 Suction hose with check valve Equipped with: • Three ceramic coated pistons, brass linear pump head with built-in by-pass valve • Suction and delivery S/S valves • 9 HP unleaded gasoline engine. • By-pass with safety valve. • Integrated detergent suction with external suction probe. • Pressure regulator. • Suction hose with check valve (optional) . • Hose holder. • Nozzles holder. • 4 l gasoline tank. Thermic 9 L code 8.601.0188C operat. pressure/max 220/250 bar - 3190/3625 psi delivery rate 900 l/h - 3.96 GPM engine type/hp Lavor/9 pump type/RPM TPBH5/3400 RPM max. water inlet temp. 40 °C dimension/weight 50x67x 103 cm/45 Kg - 101 lbs

32. 32 High pressure cleaners Standard equipment: • 3.700.0030 Gun M22 - 3/8” with rotating coupling . • 3.701.0015 Lance M22 high/low pressure • 3.103.0047 Nozzle type 030 (mod. 1509 XP) • 3.103.0013 Nozzle type 020 (mod. 2007 XP) • 3.103.0050 Nozzle type 045 (mod. 1713 XP) • 4.618.0049 High pressure hose 8 m • Power cable 5 m Dakota-R XP Optional: • 6.608.0073 Hose reel with brake (hose not included) Equipped with: • Three ceramic coated pistons, brass axial pump head with built-in by-pass valve. • Low voltage and delayed Total Stop. • Suction and delivery S. S. valves. • Vertical burner with high thermal efficiency steel coil. • Temperature regulation gauge. • Low fuel lamp. • Safety valve. • Detergent built-in tank (4,2 lt) for indirect suction. • Pressure regulator. • Glicerine pressure gauge. • Panel with analogic controls. • Hose reel with brake (optional) . Hot water high-pressure cleaner Dakota-R 1509 XP Dakota-R 2007 XP Dakota-R 1713 XP code 8.633.0107 8.633.0108 8.633.0109 operat. pressure/max 150/160 bar-2175/2320 psi 200 bar-2900 psi 170 bar-2465 psi delivery rate 540 l/h-2.37 GPM 420 l/h-1.84 GPM 780 l/h-3.43 GPM abs. power/voltage 3200W - 230V~50Hz 1ph 3300W - 230V~50Hz 1ph 4700W - 400V~50Hz 3 ph motorpump type/RPM MPBX2/2800 RPM MPBX2/2800 RPM MPBX2/2800 RPM max. water inlet/outlet temp. 40/140 °C 40/140 °C 40/140 °C dimension/weight 75x58x103 cm/74 Kg - 163 lbs 75x58x103 cm/74 Kg - 163 lbs 75x58x103 cm/76 Kg - 167 lbs

33. 33 High pressure cleaners Standard equipment: • 3.700.0030 Gun M22 - 3/8” with rotating coupling . • 3.701.0015 Lance M22 high/low pressure • 3.103.0050 Nozzle type 045 (mod. 1211 XP) • 3.103.0049 Nozzle type 040 (mod. 1813 XP) • 4.618.0143 High pressure hose 10 m • Power cable 5 m NPX XP Optional: • 6.608.0001 Hose reel with brake (hose not included) Equipped with: • Three ceramic coated pistons, brass axial pump head with built-in by-pass valve. • Low voltage and delayed Total Stop. • Suction and delivery S. S. valves. • Vertical burner with high thermal efficiency steel coil. • Temperature regulation gauge. • Low fuel lamp. • Safety valve. • Detergent built-in tank (3 lt) for indirect suction. • Pressure regulator. • Glicerine pressure gauge. • Panel with analogic controls. • Heavy duty steel frame. • Accessory holder. • Two ways fuel pump. • Hose reel with brake (optional) . Hot water high-pressure cleaner NPX 1211 XP NPX 1813 XP code 8.620.0601 8.620.0617 operat. pressure/max 120/150 bar-1740/2175 psi 180 bar-2610 psi delivery rate 660 l/h-2.91 GPM 780 l/h-3.43 GPM abs. power/voltage 3200W - 230V~50Hz 1ph 6300W - 400V~50Hz 3 ph motorpump type/RPM MPBX2/2800 RPM MPBX2/2800 RPM max. water inlet/outlet temp. 40/140 °C 40/140 °C dimension/weight 94x65x90cm/97 Kg - 213 lbs 94x65x90cm/99 Kg - 217 lbs

62. 62 Vacuum cleaners Windy 378 PF Equipped with: • 3 high efficiency by pass motors. • Suction system with by-pass cooling. • Filter cleaning system. • Plastic tank (PP). • Shock proof trolley. • Liquid float valve. • Cloth filter. • 7,5 m power cable. • Traceless wheels. • Accessories Ø 40. • Handy accessory holder. Optional: • code. 5.212.0022 Paper collector filter set - 10 pcs • code. 5.509.1405 Cloth filter for fine dust • code. 5.212.0093 Nylon filter Standard equipment: • 5.209.0021 Hose 2,5 m • 6.205.0126 • 3.754.0048 • 3.754.0049 • 3.754.0083 • 3.754.0084 • 3.754.0085 • 5.509.2176 • Power cable 7,5 m 400 mm Windy 378 PF code 8.256.0002 voltage 220-240V ~ 50-60Hz n°motors - power (max) 3 - 3000 (3600) W High efficiency motor. column depression 22 kPa/2200 mmH 2 O air suction 195 l/s total volume/dust/liquid 78 l./35 l./48 l. dimension/weight 62x51x99 cm/23,5 kg Watch the video on youtube: www.youtube.com/lavorpro Wet & dry vacuum cleaners NEW

102. 102 Floor scrubber driers Comfort XS-R Up • Capable to work for the maintenance and deep cleaning of large areas (up to 4.000 m²) with a considerable reduction of cleaning costs • More than 50 kg of constant pressure on the brushes • Large load tank capacity, resulting in reduced number of stops and maximum use of battery charge for effective operation of the machine • Compact size (810 mm) • Stability even when fully loaded, front independent wheeldrive with tight steering radius • Recovery tank control window for cleaning and easy ordinary maintenance • Automatic brush plate lifting system • Automatic squeegee lifting system • Automatic squeegee lifting while reverse going • Automatic device that stops brushes and detergent water outflow when the machine is stationary • Antifoam device • Self-levelling brushes • Integrated on-board battery charger. Ride-on floor scrubber driers Standard equipment: • 0.108.0054 On-board Battery charger 24V 20A Comfort XS-R 75 Up Comfort XS-R 85 Up code 8.574.4101 8.574.4103 power supply 24V (battery charger included) 24V (battery charger included) scrubbing/squeegee width 750/900 mm 850/1000 mm max working capacity 3750 m²/h 4100 m²/h solution tank capacity 110 l/29.05 gal 110 l/29.05 gal recovery tank capacity 130-155 l/34.35-40.95 gal 130-155 l/34.35-40.95 gal traction type/power front motorwheel/600 W front motorwheel/600 W RPM/pressure on the brushes 170/50 kg/110.23 lbs 170/50 kg/110.23 lbs brush motor power 2 x 400 W 2 x 400 W max gradient empty/full tank 13%/10% 13%/10% depression/vacuum motor 1300 mmH 2 O/400W 1300 mmH 2 O/400W dimensions/weight 146x81x138 cm/189 kg 146x81x138 cm/195 kg • 2 x 5.511.1168 PP brush Ø 360 mm - 14" Comfort XS 75 Up Comfort XS 85 Up • 2 x 5.511.1688 PP brush Ø 430 mm - 17" • 4.508.1196 Front squeegee blade L.1027 mm Shore 40 Th. 3 mm • 4.508.1195 Rear squeegee blade L.1150 mm Shore 33 Th. 4 mm Comfort XS 75 Up Comfort XS 85 Up • 4.508.0646 Front squeegee blade L.925 mm Shore 40 Th. 3 mm • 4.508.0605 Rear squeegee blade L.1015 mm Shore 30 Th. 4 mm Watch the video on youtube: www.youtube.com/lavorpro

110. 110 Sweepers Is it better a petrol engine driven or a battery powered model? The use of a petrol engine implies the presence of exhaust gasses and therefore the machine must be used only in outside areas or in areas where the operator is not exposed at such risk. The battery models can be used also inside. From the technical and qualitative point of view the sweepers do exactly the same cleaning task, but the petrol engine machine can work nonstop (it is only necessary to fill up the tank with petrol), while the electric models, once the battery is empty, need to be re-charged (an average of 8-10 hours of charge, if battery is completely worn-out) How should the brush be? In the sweepers, there are two types of bushes: the first one rotates with a perpendicular axle to the floor (this is the one called “side brush”), it is useful to move dirt into the collecting area and to reach dirt near borders or under edges; the second one rotates with a parallel axle to the floor (this is the one called “main brush”); it rotates counterclockwise (opposite) to the forward direction of machine and collects dirt into the collection tank. The brushes differ in the shape (round flat the “side brush” and cylindrical the “main brush”), in the type of bristles (the way bristles are arranged on the brush body), in the body material (that accordingly to options, provides resistance still in humid enviroment or competitive construction) and in the bristle material/diameter/shape. Generally, the stiffer and rougher the bristles are, the better they collect the heaviest dirt adherent to the floor (typically wet leaves). The more flexible and thinner the bristles are, the better they collect light and thin dirt . To have a better scraping action, it is necessary to add steel bristle to the PP ones. To collect very thin dirt, it is necessary to use only short round PP bristles. As a consequence of motorization (petrol engine or electric one) and so of indoor or outdoor use, the walk behind models have stiffer or softer bristles, to adapt in best way possible to the type of dirt typically found in the working area. How long do battery charges last? It is impossible to determine exactly how long a battery charge lasts. Battery autonomy changes depending on type of surface, dirt quantity, brush type and way in which traction system is used (speed and slope). Battery life is made up of number of charge cycles (also incomplete), if use conditions, charge and service are perfectly observed. Manufacturing technology diversifies numbers of cycles, service needed, use/charge conditions and performances. Which kind of battery technology? Batteries have different prices and so it is important to know their features in order to choose the best one as far as the operator’s needs or habits are concerned. They divide into two families according to the necessity of recurrent acid solution refilling. Acid lead batteries (Pb-Acid), need refilling, because during the charge cycle a lot of gasses are generated (for this reason a specific and aired room is necessary for safe working) and the solution vaporizes: it is necessary to add distilled water before the submerged lead parts that are no more covered with water begin to oxidize (compromised efficiency). VRLA batteries (Valve Regulated Lead Acid) are airtight, this means that gasses generated during the charge cycle are rearranged inside the battery: refilling is not necessary, it is possible to charge them in any room and they can be carried without risk. Acid lead batteries divide themselves into categories depending on the thickness of plate they are built of: if the plate is plane, the resistance to discharge is lower and few charge cycles are necessary, if the plate is tubular (or armed, recognizable opening the battery cap and verifying that the plate is made up of a lot of cylinders side by side instead of a thin leaf sheet) there is a higher resistance to discharge and to charge cycles. Sweepers

113. 113 Sweepers Equipped with: • Industrial battery-powered sweeper for the quick, quiet and cordless intermediate cleaning of all surfaces, indoor and outdoor. • Ideal for entryways of all kinds, hallways, staircases, driveways, warehouse and office areas, airports and train stations. • Equipped with two batteries, the operation time lengthens to 90 minutes. • The powerful Lithium-Ion battery (without memory effect) with 10.8 V and 1.5 Ah allows an operation time of approx. 45 minutes per battery. • Second battery can be directly stored and carried on the machine itself. • Quick-charging unit with a charging time of only 70 minutes is included with purchase. • Large foot pedal for activation without bending over. • Main cylinder brush and side brushes can be replaced without tools. • Aluminum telescopic handle for an optimum work position. • Traceless wheels. • Enormous waste collection tray with 2 liter capacity. • Changeable bristled rim on the underside of the housing. • Low noise volume, and therefore excellent for use during business hours. • Compact, light, and easy-to-handle for any user. Space-saving storage position. BSW 375 ET BSW 375 ET code 0.064.0001 main brush + 2 side brush width 375mm/14,76 inc collector tank 2 lt/0,52 gal max working capacity 1000 m 2 /h-10764 ft 2 Operating voltage 10,8V/1,5 Ah Max. Power 25 W Voltage (charging unit) 230 V~50 Hz dimension/weight 30x36x70cm/2,8 kg Standard accessories: 0.964.0017 Cylinder brush 0.964.0018 2 x Side brush 2 x 0.964.0002 10.8V Lithium-Ion battery 0.964.0001 Battery charger All-round sweepers Watch the video on youtube: www.youtube.com/lavorpro

46. 46 Vacuum cleaners Pow er, air suction, depressure: which technical data is most important? The right technical data of a vacuum cleaner is the vacuum efficiency, that is the mix of different values, i.e. air suction, motor power and depression. Air suction is the vacuumed air volume, commonly expressed in litres per seconds (l/sec) and it is the result of the average air speed multiplied by hose diameter. The depression is the vacuum power (it can be defined as the vacuum power to collect dirt) and it is commonly expressed in kPA or in mbar. It is an inverse relation to air suction: the narrower the flex diameter, the least vacuumed air volume but the best strength to pick up dirt. Power motor is expressed in Watt and it is not proportional to vacuum efficiency! If the vacuum cleaner is not well-done, it wastes a lot of electric power without having the best performances possible. Summing up, the vacuum cleaner efficiency is a relationship between air suction (resulting in multiplication of pressure and air suction) and motor power. All our vacuum cleaners have a top efficiency and are manufactured considering essence and user’s benefit. Fixed or tilting trolley, which one to choose? The choice of the trolley must be made considering the type of use needed. Generally, tilting trolley is much more useful to collect dust and solids, because the tilting tank make it easier the emptying or pouring. The fixed trolley is better for liquids vacuuming, because it is equipped with drain hose system, emptying is fast and step by step, avoiding the effort of lifting the tank. What kind of tank material is to be preferred? Our vacuum cleaner range includes plastic tanks (polypropylene or PP) or stainless steel tanks. The PP tank is flexible, shock proof and resistant to chemical products. It is recommended for frequent moving uses or vacuuming of particularly aggressive chemicals (for example in combination with a single disc machine). The stainless steel tank is more rigid, steadier, resistant to mechanical abrasion and it is aesthetically agreeable. It is recommended for static use, with abrasive materials or in a public place. Dry vacuum cleaners/wet & dry vacuum cleaners and Injection extraction

52. 52 Vacuum cleaners Wet & dry vacuum cleaners PROWORKER is the NEW LAVORPRO wet and dry vacuum cleaner with power tool socket, automatic filter shaker and blowing system, ideal for challenging and heavy applications with required suction directly from the tool. The constant use of PROWORKER helps the maintenance of a healthy and clean working environmnet. • Ideal for dust suction directly from the power tool during the following operations: drilling, milling, lapping, grinding and cutting • Suitable for suction of plaster, stone, concrete, chalk, and wood dust, paints and enamels, in compliance with the standards on dust classifications • Essential in building yards, body shops, joiner's shops, for installers, plumbers, maintainers and where it is necessary to clean after a job. Essential to comply with the directives on hazardous dust extraction/emission, it offers a multilevel filtering system made of M/E10 suction filter with NANO TECH coating, microbiber collector filter, and M/E10 output air filter which classify it as a CLASS M Certified vacuum cleaner. PROWORKER is able to keep the 99,9% of all vacuumed dust with OEL (Occupational Exposure Limit) higher than a 0,1 mg/m 3 . Some example of the dusts that can be kept with these vacuum cleaners are working residuals of: wood, copper, insecticide and pesticide, manganese (tools of the earth-moving equipments), platinum, nickel etc. PRO Worker EM Wet & dry vacuum cleaner

65. 65 Injection extraction Standard equipment: • 5.209.0183 + • 5.211.0094 Hose 2 m • 3.753.0009 • 5.209.0193 • 5.209.0187 • 3.754.0004 • 3.754.0015 • 3.754.0005 • 3.754.0189 • 3.754 .0188 • 3.752.0038 • 3.752.0032 • 5.212.0020 • Power cable 7,5 m GBP 20 Pro Equipped with: • Silenced single stage motor. • Suction system with by-pass cooling. • 20 litre plastic tank (PP) • Shock proof trolley. • Liquid float valve. • 7,5 m power cable. • Washable filter • Paper collector filter • Accessories Ø 35. Optional: GBP 20 Pro code 8.204.0066 voltage 230V ~ 50Hz n°motors - power (max) 1 - 1200 (1400) W column depression 27 kPa/2700 mmH 2 O air suction 70 l/s total volume 20 l. dimension/weight 40x39x64 cm/9,5 kg Hygienic PERFUME OPTIONAL Code 0.010.0035 100 ml x 4 pcs Vacuum cleaners - Injection extraction

100. 100 Floor scrubber driers Comfort XS-R Essential • Capable to work for the maintenance and deep cleaning of large areas (up to 3.700 m²) with a very important reduction of cost of cleaning • More than 50 kg of constant pressure on the brushes • Large load tank capacity, resulting in reduced number of stops and maximum use of battery charge for effective operation of the machine • Compact size (810 mm) • Stability even when fully loaded, front independent wheeldrive with tight steering radius • Recovery tank control window for cleaning and easy ordinary maintenance • Easy access to electrical components • Automatic device that stops brushes and detergent water outflow when the machine is stationary • Self-levelling brushes. Ride-on floor scrubber driers Standard equipment: Comfort XS-R 75 Essential Comfort XS-R 85 Essential code 8.574.4001 8.574.4003 power supply 24V 24V scrubbing/squeegee width 750/900 mm 850/1000 mm max working capacity 3750 m²/h 4100 m²/h solution tank capacity 110 l/29.05 gal 110 l/29.05 gal recovery tank capacity 130-155 l/34.35-40.95 gal 130-155 l/34.35-40.95 gal traction type/power front motorwheel/600 W front motorwheel/600 W RPM/pressure on the brushes 170/50 kg/110.23 lbs 170/50 kg/110.23 lbs brush motor power 2 x 400 W 2 x 400 W max gradient empty/full tank 13%/10% 13%/10% depression/vacuum motor 1300 mmH 2 O/400W 1300 mmH 2 O/400W dimensions/weight 146x81x138 cm/184 kg 146x81x138 cm/187 kg Watch the video on youtube: www.youtube.com/lavorpro • 4.508.1196 Front squeegee blade L.1027 mm Shore 40 Th. 3 mm • 4.508.1195 Rear squeegee blade L.1150 mm Shore 33 Th. 4 mm Comfort XS-R 75 Comfort XS-R 85 • 4.508.0646 Front squeegee blade L.925 mm Shore 40 Th. 3 mm • 4.508.0605 Rear squeegee blade L.1015 mm Shore 30 Th. 4 mm • 2 x 5.511.1168 PP brush Ø 360 mm - 14" Comfort XS-R 75 Comfort XS-R 85 • 2 x 5.511.1688 PP brush Ø 430 mm - 17"

126. 126 Steam generators Equipped with: • Stainless steel body AISI 304 • Ready steam warning lamp • Boiler 3 kW S.S. AISI 304 - Thickness 25/10 • Low level water lamp indicator • Boiler is refilled continuously • Switch for using chemicals and detergents mixed with steam • Device for cleaning hot water mixed with steam • Washable filter • Flex hose 4 m • Recovery tank capacity 64 l • Drain hose system • Steam regulation • Wheels suitable for use in food processing area • ON/OFF main switch with indicator lamp • ON/OFF boiler switch with indicator lamp • Boiler capacity 4 litres. • Suction speed Control (Only code 8.451.0201) Vacuum steam generators GV Etna 4.1 GV Etna 4.1 GV Etna 4.1 FR Code 8.451.0201 8.451.0210 Max steam pressure/temperature 7 bar/165° C 7 bar/165° C Boiler absorbed power 3000 W/230V ~ 50Hz (Ph 1) 3000 W/230V ~ 50Hz (Ph 1) Vacuum motor absorbed power 1200 W 1200 W Column depression/Air flow 20.39 kPa/220 m³/h 20.39 kPa/220 m³/h Water tank/detergent tank capacity 5 l/5 l 5 l/5 l Watch the video on youtube: www.youtube.com/lavorpro • 5.211.0123 Hose 4 m (mod. GV Etna 4.1) • 5.211.0124 Hose 4 m (mod. GV Etna 4.1 FR) • 3.753.0141 • 3.754.0278 • 3.754.0005 • 3.754.0109 • 3.754.0108 • 3.754.0110 • 6.405.0245 • 3.754.0194 • 3.754.0215 • 3.754.0196 • 3.754.0197 • 3.754.0204 • 3.754.0260 • 3.754.0192 • 5.212.0178 • 4.408.0454 - Sponge accessory Standard equipment: • 3.754.0271 NEW

30. 30 High pressure cleaners Optional: 4.618.0012 high presssure hose 3/8” ø 5/16” 10m, to connect any cold high pressure cleaner to the Vulcano. Vulcano 74 Portable boiler Equipped with: Boiler feeding: Diesel High thermal efficiency vertical burner. • Shock-resistant self-bearing frame. • 4 big wheels for easy move. • Gasoil tank high capacity ensuring longer working. • Quick couplings supplied with the machine. • Diesel tank capacity 18 l. • High pressure hose 3/8” Ø 5/16” 10 m, to connect any cold high pressure cleaner to Vulcano (optional) . Vulcano 74 code 8.699.0015 operat. pressure allowed max. 200 bar-2900 psi delivery rate allowed max. 1260 l/h-5.55 GPM abs. power/voltage 300W/230V~50Hz 1 ph max. temp. outlet 140 °C heat output 74 kW dimension/weight 94x65x90cm/44 Kg - 88 lbs

11. 11 High pressure cleaners • Low voltage and delayed Total Stop: To avoid quick and multiple start and shut down of the motor/pump group whenever the gun trigger is pulled and released, this disposal delays of about 15 seconds the machine shut down. Prevention, energy saving, top safety and pump longer life. • Motor low rotation speed: The electric motor transfers the same number of revolutions to the pump. With a 4 poles motor there is a lower rotation speed of the components (1400 RPM in case of 50Hz or 1750 RPM in case of 60 Hz) granting longer pump life. Extending lifetime solution. Cold water high-pressure cleaner Vanguard line lifetime. What determines the pump quality is the quality of the project itself (linear or axial) and of the components used; for this reason Lavorwash decided to develop both technologies, taking into consideration a design that grants margin of safety and reliability. • Linear pump: The movement of the (3) pistons occurs through a system of connecting rods and crankshaft. The longitudinal axle of the pistons (placed at the same level or linear) is perpendicular to the motor rotation axle. It is more versatile to bear high delivery rates (from 21 l/ min) and it has a better self priming. • Water cooled motor: Water flows through the S. S. coil around the motor, this allows a better thermal exchange (and so a cooling) than air also in those countries where inlet water could reaches 60°C. This allows a drop in operating temperature of the motor and pump mechanical elements, granting a better reliability and longer life. • Total Stop: Releasing the gun trigger the pump stops automatically avoiding element damages during the by-pass phase. Pulling the trigger, the high-pressure cleaner starts automatically. Max pump protection.

34. 34 High pressure cleaners Standard equipment: • 3.700.0030 Gun M22 - 3/8” with rotating coupling . • 3.701.0015 Lance M22 high/low pressure • 3.103.0050 Nozzle type 045 (mod. 1211 LP) • 3.103.0048 Nozzle type 035 (mod. 1611 LP) • 3.103.0047 Nozzle type 030 (mod. 1509 LP) • 4.618.0049 High pressure hose 8 m (mod 1211 LP) • 4.618.0143 High pressure hose 10 m (mod 1509/1611 LP) • Power cable 5 m Texas-R LP Optional: • 6.608.0073 Hose reel with brake (hose not included) Equipped with: • 4 poles electrical motor (1450 RPM) with thermal protection and water cooling (three phase models). • Three ceramic coated pistons (1 ph), full ceramic pistons (3 ph) , brass linear pump head with built-in by-pass valve. • Low voltage and delayed Total Stop. • Suction and delivery S. S. valves. • Vertical burner with high thermal efficiency steel coil. • Temperature regulation gauge with high sensitive stainless steel sensor. • Detergent built-in tank (4,2 lt) for indirect suction. • Auxiliary motor for burner. • Hose reel with brake (optional) . Hot water high-pressure cleaner Texas-R 1211 LP Texas-R 1509 LP Texas-R 1611 LP code 8.630.0101 8.630.0102 8.630.0103 operat. pressure/max 120/150 bar-1740/2175 psi 150 bar-2175 psi 160 bar-2320 psi delivery rate 660 l/h-2.91 GPM 540 l/h-3.17 GPM 660 l/h-2.91 GPM abs. power/voltage 3000W - 230V~50Hz 1ph 3000W - 230V~50Hz 1ph 4300W - 400V~50Hz 3 ph motorpump type/RPM MP4/1450 RPM MP4/1450 RPM MP4/1450 RPM max. water inlet/outlet temp. 40/140 °C 40/140 °C 40/140 °C dimension/weight 94x65x90cm/112 Kg - 246 lbs 94x65x90cm/113 Kg - 275 lbs 94x65x90cm/128 Kg - 282 lbs 1450

35. 35 High pressure cleaners Hot water high-pressure cleaner Standard equipment: • 3.700.0030 Gun M22 - 3/8” with rotating coupling . • 3.701.0015 Lance M22 high/low pres. • 3.103.0050 Nozzle type 045 • 4.618.0143 H. P. hose 10 m • Power cable 5 m Optional: • 6.608.0077 Hose reel with brake (hose not included) • On request models with header tank and/or antiscale device. • 3.697.0044 Antiscale LC-PRECAL (pcs. 4 x 5 lt.) • Code 8.621.2944 LKX 2015 with header tank • Code 8.621.3032 LKX 2015 with header tank and antiscale device LKX LP single-phase model 1450 Equipped with: • 4 poles electrical motor (1450 RPM) with thermal protection. • Three ceramic coated pistons , brass linear pump head with built-in by-pass valve. • Low voltage and delayed Total Stop. • Suction and delivery S. S. valves. • Vertical burner with high thermal efficiency steel coil. • Temperature regulation gauge with high sensitive stainless steel sensor. • Detergent built-in tank (3 lt) for indirect suction. • Auxiliary motor for burner. • Heavy duty steel frame. • Hose reel with brake (optional) . LKX 1310 LP code 8.621.2947 operat. pressure/max 110/150 bar-1595/2175 psi delivery rate 660 l/h-2.91 GPM abs. power/voltage 3000W - 230V~50Hz 1ph motorpump type/RPM MP4/1450 RPM max. water inlet/outlet temp. 40/140 °C dimension/weight 94x65x90cm/112 Kg - 246 lbs

72. 72 Industrial vacuum cleaners Standard equipment: • Reduction Ø 70 - Ø 50 mm SMX 77 SMX77 2-24 SMX77 3-36 code 0.056.0002 0.056.0004 abs. power W 2000 3000 n°/type motor 2x two stages universal 3x two stages universal column depression 23,6 kPa (2400 mmH2O) 23,6 kPa (2400 mmH2O) suction air 108 l/s 162 l/s tank volume/dust capacity/liquid capacity 77 l/45 l/50 l 77 l/45 l/50 l noise level 74 dB(A) 76 dB(A) voltage 230 V~50-60 Hz (1Ph) 230 V~50-60 Hz (1Ph) filtering surface 4300 cm² 4300 cm² filtering capacity 5 μm 5 μm cable lenght 7,5 m 7,5 m dimensions/weight 70x91x141cm/66Kg-145.2 lbs 70x91x141cm/67Kg-147.4 lbs Models: 2-24 Models: 3-36 Optional: • Heat resistant over filter code 0.156.0003 • Oven kit Ø 40 code 0.156.0005 Equipped with: • 3 silenced two stage motor (SMX 3-36 model). • 2 silenced two stage motor (SMX 2-24 model). • Suction system with by-pass cooling. • S. S. tank. • Manual filter shaker. • Professional closing hooks. • Static electric shock inhibitor. • Liquid float valve. • Cloth filter. • Filters (optional) against thin dust or Hepa. • Though integrated accessory storage facility. • Non-overturning steel structure. • Available with body and cover entirely made of S. S. AISI 304. • Traceless wheels. • Accessories Ø 50. • Cloth filter Industrial Wet & dry vacuum cleaners

94. 94 Floor scrubber driers Easy-R • Suitable to work for the maintenance and deep cleaning of large areas (up to 2.200 m²) • User friendly control panel: forward speed setting, scrubbing and vacuuming selectors, battery charge indicator, traction direction indicator, key main switch • Large handle with traction driving lever for forward and backward directions • Self levelling brush plate • Cover removable without tools provided with self locking system • Quick vacuum motor and filter inspection, without tools • Detergent solution tank with large opening protected by quick locking cap • Parking brake directly on the wheel • Non-marking wheels • Easy squeegee regulation without tools • Movable shock-proof squeegee • Hour meter and solenoid valve. Walk-behind floor scrubber driers Standard equipment: • 5.511.1097 PP brush Ø 483 mm - 19" • 2 x 5.511.1101 PP brush Ø 275 mm - 10" Easy-R 50BT Easy-R 55BT Easy-R 66BT code 8.516.0406 8.516.0407 8.516.0415 power supply 24V 24V 24V scrubbing/squeegee width 500/800 mm 550/800 mm 660/800 mm max working capacity 2250 m²/h 2475 m²/h 2970 m²/h solution tank capacity 67 l/17.70 gal 67 l/17.70 gal 67 l/17.70 gal recovery tank capacity 75-95 l/20.35-25 gal 75-95 l/20.35-25 gal 75-95 l/20.35-25 gal traction/traction motor automatic/200W automatic/200W automatic/200W RPM/pressure on the brushes 150/35 kg/77.16 lbs 150/45 kg/99.20 lbs 150/24 kg/52.91 lbs brush motor power 600 W 600 W 600 W detergent solution system solenoid valve solenoid valve solenoid valve depression/vacuum motor 1280 mmH 2 O/400W 1280 mmH 2 O/400W 1280 mmH 2 O/400W dimensions/weight 135x56x102 cm/101 kg 128x71x106 cm/100 kg 128x71x106 cm/93 kg Easy-R 50BT Easy-R 55BT • 2 x 5.511.1105 PP brush Ø 330 mm - 13" Easy-R 66BT • 4.508.X468 Front squeegee blade L.830 mm Shore 40 Th. 2.5 mm • 4.508.X467 Rear squeegee blade L.870 mm Shore 40 Th. 3 mm Watch the video on youtube: www.youtube.com/lavorpro

36. 36 High pressure cleaners Hot water high-pressure cleaner Standard equipment: • 3.700.0030 Gun M22 - 3/8” with rotating coupling . • 3.701.0015 Lance M22 high/low pres. • 3.103.0053 Nozzle type 060 (mod. 1515 LP) • 3.103.0050 Nozzle type 045 (mod. 2015 LP) • 4.618.0143 H. P. hose 10 m • Power cable 5 m Optional: • 6.608.0077 Hose reel with brake (hose not included) • On request models with header tank and/or antiscale device. • 3.697.0044 Antiscale LC-PRECAL (pcs. 4 x 5 lt.) • Code 8.621.2944 LKX 2015 with header tank • Code 8.621.3032 LKX 2015 with header tank and antiscale device LKX LP three-phase models 1450 Equipped with: • 4 poles electrical motor (1450 RPM) with thermal protection and water cooling • Three full ceramic pistons , brass linear pump head with built-in by-pass valve. • Low voltage and delayed Total Stop. • Suction and delivery S. S. valves. • Vertical burner with high thermal efficiency steel coil. • Temperature regulation gauge with high sensitive stainless steel sensor. • Detergent built-in tank (3 lt) for indirect suction. • Auxiliary motor for burner. • Heavy duty steel frame. • Hose reel with brake (optional) . LKX 1515 LP LKX 2015 LP code 8.621.2934 8.621.2935 operat. pressure/max 150 bar-2175 psi 200 bar-2900 psi delivery rate 900 l/h-3.96 GPM 900 l/h-3.96 GPM abs. power/voltage 5500W - 400V~50Hz 3 ph 7300W - 400V~50Hz 3 ph motorpump type/RPM MPW4/1450 RPM MPW4/1450 RPM max. water inlet/outlet temp. 40/140 °C 40/140 °C dimension/weight 94x65x90cm/125 Kg - 275 lbs 94x65x90cm/128 Kg - 282 lbs

98. 98 Floor scrubber driers Comfort XXS Designed for the maintenance and deep cleaning of large areas (up to 3200 m 2 .) with a very important reduction of cleaning cost. Very compact size and great maneuverability like walk behind models: suited for maintenance cleaning. • 32 kg. of constant pressure on the brushes. • Double counter rotating brush (66 cm of scrubbing width) obtaining better stability and constant pressure. • Great working autonomy thanks to the possibility to use 4 batteries 6 V 240 Ah and to rear wheel-drive. • Large load tank capacity (real load of 85 l. ), resulting in reduced numbers of stops and maximum use of battery for effective operation of the machine. • Ergonomic steering wheel of new design with user friendly controls and digital display. • Easy access to electrical components. • Inspection cover for fast and easy cleaning and sanification of dirt water tank. • Automatic device that stops brushes and detergent water outflow when the machine is stationary. • Self-levelling brush plate. • Automatic detergent dosing system . Comfort XXS 66 BT Comfort XXS 66 BT Comfort XXS 66 BT code 8.579.0001 8.579.0011 8.579.0002 power supply 24V 24V (battery charger included) 24V (batteries and battery charger included) scrubbing/squeegee width 660/855 mm 660/855 mm 660/855 mm max working capacity 3250 m²/h 3250 m²/h 3250 m²/h solution tank capacity 80 l/19.81 gal 80 l/19.81 gal 80 l/19.81 gal recovery tank capacity 80-85 l/19.81-21.13 gal 80-85 l/19.81-21.13 gal 80-85 l/19.81-21.13 gal traction rear wheel-drive/400 W rear wheel-drive/400 W rear wheel-drive/400 W RPM/pressure on the brushes 170/32 kg/70.54 lbs 170/32 kg/70.54 lbs 170/32 kg/70.54 lbs brush motor power 2 X 400 W 2 X 400 W 2 X 400 W max gradient empty/full tank 13%/10% 13%/10% 13%/10% depression/vacuum motor 1300 mmH 2 O/400 W 1300 mmH 2 O/400 W 1300 mmH 2 O/400 W dimensions/weight 123x63x121 cm/139 kg 123x63x121 cm/142 kg 123x63x121 cm/217 kg Standard equipment: • 0.108.0054 On-board Battery charger 24V 20A (only for models code: 8.579.0002 - 8.579.0011) Only codes 8.579.0002 8.579.0011 Only code 8.579.0002 • 2 x 5.511.1789 PP Brush Ø 330 mm - 13" • 4.508.1619 Front squeegee blade L.960 mm Th. 2,5 mm • 4.508.1618 Rear squeegee blade L.1000 mm Th. 3 mm Watch the video on youtube: www.youtube.com/lavorpro Ride-on floor scrubber driers • 2 x 0.107.0063 Gel battery 12V 105 A/C 5/120A C20 (only for model code: 8.579.0002)

22. 22 High pressure cleaners Cold water high-pressure cleaner Heritage line Columbia-R LP Equipped with: • 4 poles electrical motor (1450 RPM) with thermal protection and water cooling (three phase models). • Three ceramic coated pistons (1 ph), full ceramic pistons (3 ph) , brass linear pump head with built-in by-pass valve. • Low voltage and delayed Total Stop (three phase model). • Suction and delivery S. S. valves. • Integrated detergent suction with external suction probe. • Pressure regulator. • Glicerine pressure gauge. • Hose reel (optional) . • Accessory holder. • Power cable holder. • Steel frame. • Steel cover. 1450 Models: 1211 LP Models: 1515 LP/2015 LP Standard equipment: • 3.700.0036 Gun M22 - 3/8” (mod 1211 LP). • 3.700.0030 Gun M22 - 3/8” with rotating coupling (mod. 1515 LP/2015 LP). • 3.701.0027 Lance M22 high/low pressure • 3.103.0050 Nozzle type 045 (mod. 1211 LP/2015 LP) • 3.103.0053 Nozzle type 060 (mod. 1515 LP) • 4.618.0049 High pressure hose 8 m (mod. 1211 LP) • 4.618.0143 High pressure hose 10 m (mod. 1515 LP/2015 LP). • Power cable 5 m (mod. 1211 LP) • Power cable 6 m (mod. 1515 LP - 2015 LP) Optional: • 6.608.0068 High-pressure hose reel (hose not included) Models: 1515 LP - 2015 LP Columbia R 1211 LP Columbia R 1515 LP Columbia R 2015 LP code 8.654.1071 8.654.1073 8.654.1072 operat. pressure/max 120/150 bar-1740/2175 psi 150 bar-2175 psi 200 bar-2900 psi delivery rate 660 l/h-2.91 GPM 900 l/h-3.96 GPM 900 l/h-3.96 GPM abs. power/voltage 3000W - 230V~50Hz 1 ph 5000W - 400V~50Hz 3 ph 7000W - 400V~50Hz 3 ph motorpump type/RPM MP4/1450 RPM MPW4/1450 RPM MPW4/1450 RPM max. water inlet temperature 40 °C 40 °C 40 °C dimension/weight 50x90x83cm/37 kg - 81 lbs 50x90x83cm/49 Kg - 108 lbs 50x90x83cm/51 Kg - 112 lbs

24. 24 High pressure cleaners Cold water high-pressure cleaner with combustion engine Optional: • cod. 6.608.0007 High-pressure hose-reel (hose not included) • Suction hose with check valve 5.012.0319 Standard equipment: • 6.001.0082 Gun M22 - 1/4” • 6.002.0322 Lance M22 with nozzle-holder. • 5.012.0477 High pressure nozzle set • 4.618.0166 High pressure hose 10 m Thermic 6,5 Equipped with: • Three S/S pistons, brass linear pump head with built-in by-pass valve. • Suction and delivery S/S valves. • 6.5 HP unleaded gasoline engine. • Integrated detergent suction with external suction probe. • Glicerine pressure gauge. • Hose-reel (optional) . • Suction hose with check valve (optional) . • Steel frame. • Hose holder. • Nozzles holder. • 3,1 l gasoline tank. Thermic 6,5 code 8.601.0175C operat. pressure max 180 bar - 2610 PSI delivery rate 690 l/h - 2.77 GPM engine type/hp Lavor/6,5 pump type/RPM MP4/3600 RPM max. temp. inlet/oulet 40 °C dimension/weight 47 x 57 x 57(h) cm/38,5 Kg - 84.9 lbs

37. 37 High pressure cleaners Tekna LP Standard equipment: • 3.700.0030 Gun M22 - 3/8” with rotating coupling . • 3.708.0001 Lance with quick connection. • 3.103.0052 Nozzle type 055 (mod. 1515 LP) • 3.103.0050 Nozzle type 045 (mod. 2015 LP) • 3.103.0055 Nozzle type 070 (mod. 2021 LP) • 4.618.0143 High pressure hose 10 m • Power cable 5 m 1450 Equipped with: • 4 poles electrical motor (1450 RPM) with thermal protection and water cooling. Three ceramic pistons, brass linear pump head with built-in by-pass valve. • Low voltage and delayed Total Stop. • Suction and delivery S. S. valves. • Vertical burner with high thermal efficiency steel coil. • High pressure detergent flow with 22 liters integrated detergent tank • Auxiliary motor for burner air-cooling and two ways fuel pump. • Temperature regulation gauge with high sensitive stainless steel sensor. • Low fuel lamp and cut off. • Safety valve. • Header tank and antiscale device. Panel with analogic controls. Hose reel (optional) . Optional: • 6.608.0005 Hose reel with brake (hose not included) • 3.697.0044 Antiscale LC-PRECAL (pcs. 4 x 5 lt.) TEKNA 1515 LP TEKNA 2015 LP TEKNA 2021 LP code 8.622.0901 8.622.0902 8.622.0921 operat. pressure 150 bar-2175 psi 200 bar-2900 psi 200 bar-2900 psi delivery rate 900 l/h-3.96 GPM 900 l/h-3.96 GPM 1260 l/h-5.55 GPM abs. power/voltage 5500W - 400V~50Hz 3ph 7300W - 400V~50Hz 3 ph 9700W - 400V~50Hz 3 ph motorpump type/RPM MPW5/1450 RPM MPW5/1450 RPM MPW5 /1450 RPM max. water inlet/outlet temp. 40/140 °C 40/140 °C 40/140 °C dimension/weight 125x69x87cm/138 Kg - 304 lbs 125x69x87cm/143 Kg - 315 lbs 125x69x87cm/145 Kg - 319 lbs Hot water high-pressure cleaner

132. 132 Steam generators GV 3,3 M plus Equipped with: • Satured steam at 9 bar at a temperature of 175°C • Steam gun with low tension control • Made of AISI 304 stainless steel • Boiler 3,3 kW S. S. AISI 304. Thickness 25/10 • Heating and activation time required: 7 min. • Steam regulation • Discharge valve • Pressure gauge • Device for using chemicals and detergents mixed with steam • The boiler can be refilled from the tank provided (continuous duty) • Pivoting wheels with brakes, suitable for use in food processing areas. • 5.409.0256 Hose 3 m • 3.753.0111 • 3.754.0228 • 3.754.0229 • 3.754.0235 • 3.754.0250 • 3.754.0230 • 6.405.0240 • 3.754.0234 • 6.402.0095 • 3.099.0126 • 6.402.0096 Standard equipment: GV 3,3 M PLUS Code 8.450.0010 Max steam pressure/temperature 9 bar/175° C Boiler absorbed power 3300 W/230V ~ 50Hz (Ph 1) Steam production 4.62 kg/h Boiler type/volume Inox AISI 304/4 l Water tank/detergent tank capacity 5 l/5 l Steam generators Watch the video on youtube: www.youtube.com/lavorpro Optional: • 5.409.0254 Steam gun with hose (10 m) • 3.749.0280 Long steam lance

19. 19 • Thermal valve: When the gun trigger is released, the same water flows through the pump (by-pass) and it overheats and sooner or later this damages the valve seals. With this completely mechanical system, the thermal valve checks the temperature in the pump, opening/ closing the by-pass circuit letting new and fresh water flow inside before the elements are damaged. Simple solution without electronic devices. • Motor low rotation speed: The electric motor transfers the same number of revolutions to the pump. With a 4 poles motor there is a lower rotation speed of the components (1400 RPM in case of 50Hz or 1750 RPM in case of 60 Hz) granting longer pump life. Extending lifetime solution. • Pressure accumulator: The release of the gun trigger produces a strong counterstroke in the pump. This device amortizes this power with great benefit for the pump components and for the user, because it removes all the vibrations. Cold water high-pressure cleaner Heritage line • Linear pump: The movement of the (3) pistons occur through a system of connecting rods and crankshaft. The longitudinal axle of the pistons (placed at the same level or linear) is perpendicular to the motor rotation axle. It is more versatile to bear high delivery rates (from 21 l/min) and it has a better self priming. • Water cooled motor: Water flows through the S. S. coil around the motor, this allows a better thermal exchange (and so a cooling) than air also in those countries where inlet water could reaches 60°C. This allows a drop in operating temperature of the motor and pump mechanical elements, granting a better reliability and longer life. • Total Stop: Releasing the gun trigger the pump stops automatically avoiding element damages during the by-pass phase. Pulling the trigger, the high-pressure cleaner starts automatically. Max pump protection. • Low voltage and delayed Total Stop: To avoid quick and multiple start and shut down of the motor/pump group whenever the gun trigger is pulled and released, this disposal delays of about 15 seconds the machine shut down. Prevention, energy saving, top safety and pump longer life.

116. 116 Sweepers Walk-behind sweepers Equipped with: • Ideal for medium and large surfaces • Large filter surface with manual filter shaker • Side brush raising control • Suction switch off • Flap raise system • Panel filter in horizontal position • Main brush pressure regulation • Indirect back collection • Quick main brush release • Long life elastic belts • Reclining handle • Suction selection lever. Traction lever. Antistatic device. Wide collector tank • Heavy duty steel frame • Side brush mechanical engagement. SWL 700 ST SWL 700 ST code 0.061.0002 main brush width 510mm/20,08 inc main brush + 1 side brush width 680mm/26,77 inc collector tank 45 lt/11,89 gal max working capacity 2620 m 2 /h-28201 ft 2 traction automatic max speed 4 km/h-2,49 mile/h motor type/power Honda 4 HP/2,9kW filtering surface 2 m 2 /21,53 ft 2 pressure on the brushes adjustable filter shaker manual dimension/weight 126x63x85cm/77kg Standard accessories: 0.961.0012 PP-Mixed steel 0.961.0005 PP 0.961.0001 paper filter 14 μm • 0.961.0026 Trolley for collector tank set Optional: 0.961.0018 HEPA panel filter 0.961.0016 PE panel filter 5μm MANUAL FILTER SHAKER 0.961.0028 Side brush protection Watch the video on youtube: www.youtube.com/lavorpro

44. 44 High pressure cleaners Code Description Thread Type 3.103.0035 Pipe cleaning nozzle with side holes 3/8”M 0.55 3.103.0106 Rounded head pipe cleaning nozzle 3/8”M 0.55 3.103.0107 Pipe cleaning nozzle with side holes 3/8”F 0.55 3.103.0119 Pipe cleaning nozzle with side holes 1/4”F 0.55 Code Description Length Max. pressure Inlet Outlet m bar psi MPa 6.608.0054 Kit pipe cleaning hose 10 210 3045 21 M 22 - M Stainless steel nozzle 6.608.0045 Kit pipe cleaning hose 20 210 3045 21 M 22 - M Stainless steel nozzle Pipe cleaning nozzles Kit pipe cleaning hose with nozzle Fixed and rotating brushes 6.602.0035 Fixed brush with extension pipe mm 700 6.602.0036 Rotating brush with extension pipe mm 700 Fixed and rotating brushes max 250 bar: mm 700, max temperature 90° C, for gun M 22 Fixed brush Rotating brush Stainless steel floor cleaning lance with wheels (without nozzles) Code Pressure Flow rate Length Coupling Temperature bar psi MPa l/m GPM mm A B °C °F 6.602.0052 250 3625 25 20 5.29 500 1/4”F 1/8”F 160 320 A B High-pressure cleaner

134. 134 Steam generators GV 8 T plus Equipped with: • Built-in AISI 304 stainless steel • Pivoting wheels with brakes, suitable for use in food processing areas • The boiler can be refilled from the tank provided (continuous duty) • Discharge valve • Pressure gauge • Device for using chemicals and detergents mixed with steam • Heating and activation time required: 6 min. • Control with low tension controls • Control panel: ON-OFF main switch, indicator lamp, • Satured steam at 9 bar at a temperature of 175°C. GV 8 T plus Code 8.458.0001 Max steam pressure/temperature 9 bar/175° C Boiler absorbed power 8000 W/400V ~ 50Hz (Ph 3) Steam production 13,50 kg/h Boiler type/volume Inox AISI 304/5 l Water tank/detergent tank capacity 10 l/5 l Steam generators Watch the video on youtube: www.youtube.com/lavorpro • 6.402.0080 Hose 3,5 m • 6.402.0082 • 6.402.0081 • 6.402.0083 Standard equipment: • 6.405.0207 • 6.402.0046 • 6.402.0069 • 4.407.0033 Steam nozzle Optional: • 6.402.0087 Steam gun with hose (6 m) • 6.402.0085 Steam gun with hose (10 m) • 6.402.0092 Straight lance mm 750 without nozzle • 6.405.0197 Coupling for tanks Ø 40 • 6.402.0094 Extension 650 mm • 6.402.0097 Lance with flat nozzle • 6.402.0098 Brass bristles brush Ø 80 • 6.402.0112 Lance for barrel

64. 64 Injection extraction Injection extraction range Lavorwash professional extraction/injection machines: GBP 20 Pro , Jupiter are the real solution to clean any type of textiles! They are equipped with detergent pumps to assure always the right flow of injected chemical and are provided with a full range of accessories capable to suit each deep cleaning textile application: carpets, vehicle seats, sofas, tents, chairs, mats, etc... To be used in the HO-RE-CA , Automotive and Industrial cleaning, they will perfectly fit any requirements. GBP 20 Pro and Jupiter, a range of injection/extraction cleaning machines ideal for car cleaning, as they can be used with liquid detergent. Vacuum cleaners - Injection extraction

130. 130 Steam generators GV Katla GV Katla Code 8.453.0001 Max steam pressure/temperature 9 bar/175° C Boiler absorbed power 3300 W/230V ~ 50Hz (Ph 1) Steam production 4,62 kg/h Boiler type/volume Inox AISI 304/4 l Water tank/detergent tank capacity 5 l/5 l Equipped with: • Satured steam at 9 bar at a temperature of 175°C • Steam gun with low tension control • S. S. body AISI 304 • Boiler 3,3 kW S. S. AISI 304. Thickness 25/10 • Low level water lamp indicator • Device for using chemicals and detergents mixed with steam • Heating and activation time required: 7 min. • Steam regulation • Discharge valve • Pressure gauge • The boiler can be refilled from the tank provided (continuous duty) • Wheels suitable for food and processing areas • Storage basket. Steam generators • 5.409.0256 Hose 3 m • 3.753.0111 • 3.754.0228 • 3.754.0229 • 3.754.0235 • 3.754.0250 • 3.754.0230 • 6.405.0240 • 3.754.0234 • 6.402.0095 • 3.099.0126 • 6.402.0096 Standard equipment: Watch the video on youtube: www.youtube.com/lavorpro Optional • 5.409.0254 Steam gun with hose (10 m) • 3.754.0280 Long steam lance

138. 138 Spray SPRAY NV24 SPRAY NV50 code 0.006.0002 0.006.0003 capacity/model 24 l/painted 50 l/painted working pressure 6 bar 6 bar safety valve max 8 bar max 8 bar pressure indicator pressure gauge pressure gauge level indicator external column external column recharging pneumatic pneumatic pressure regulator manual manual gun connection 1/4" G-F 1/4" G-F hose type rilsan rilsan hose/lance lenght 10 mt/600 mm 10 mt/900 mm dimension/weight 28x32x75 cm/15 kg - 33,06 lbs 45x42x100 cm/25 kg - 55,11 lbs Standard accessories: • Professional gun. • Lance with nozzle. • Integrated inlet and outlet quick. • Chemical use hose and gasket. 600 mm Spray 24 10 m 900 mm Spray 50 10 m code 0.906.0030 code 0.906.0031 code 0.906.0084 code 0.906.0084 Chemicals & Sprayers Spray: Pneumatic charge sprayers need to be connected to an air compressor to charge the tank and allow the product vaporization without the connection to the air compressor. They work at high-pressures and so they use capacious steel or stainless steel tanks to allow a greater working autonomy.

23. 23 High pressure cleaners Cold water high-pressure cleaner with combustion engine Optional: • 6.608.0007 High-pressure hose reel (hose not included) • 5.012.0319 Suction hose with check valve Thermic 5 H Equipped with: • Three ceramic coated pistons, brass axial pump head with built-in by-pass valve. • Suction and delivery S. S. valves. 5 HP Honda GP 160 unleaded gasoline engine. • Integrated detergent suction with external suction probe. • Pressure regulator. • Glicerine pressure gauge. • Hose reel (optional) . • Suction hose with check valve (optional) . • Steel frame. • Hose holder. • 3,1 l gasoline tank. Standard equipment: • 3.700.0036 Gun M22 - 3/8” • 3.701.0027 Lance M22 high/low pressure • 3.103.0048 Nozzle type 035 • 4.618.0049 High pressure hose 8 m Thermic 5H code 8.601.0107 operat. pressure 160 bar-2320 psi delivery rate 570 l/h-2.51 GPM engine type/hp Honda GP 160/5 pump type/RPM TPBH4/3000 RPM max. water inlet temp. 40 °C dimension/weight 70x59x97cm/37 Kg - 81 lbs

70. 70 Industrial vacuum cleaners Why wider filtering area is not making automatically a better machine? In the industrial sector, productivity, resistance and breakeven expectations are growing. The ideal vacuum would be then a machine filtering any kind of dust (also the thinnest) being able to work continuously without the need to clean the filter and without any maintenance. It is more important to get close effectively to this target rather than the way we can reach this. This is the reason why is useless having a big filtering area if the filter is still clogging up fast and more often I need to stop working to clean it. In our machines we developed the best prevention of the problem (avoiding dust is reaching quickly the filter) rather than trying a solution afterwards (since the filter is clogging up quickly, extending the filtering area it is supposed to extend the effectiveness). It doesn’t matter how wide is the filter, but for how long can work the machine without the need to clean the filter... And with this issue, we are the best. When either more airflow or more depressure is necessary? The airflow helps the dirt transport trough long pipes. Longer is the hose, better is bigger airflow; still with light dust it is better having lower depressure: the inlet air speed will be lower, the harder the dirt is getting in touch with the filter. When residuals have high specific weight, depressure is more important than airflow to win gravity force of dirt attached to the surface. Number of motors: It explains how many motors there are in the vacuum cleaner. Ignition is independent in order to increase progressively the performances. The working system (whenever it is more than one) is in parallel, so the air suction increases and the depressure is steady whenever the motors are progressively switched on. Cloth filter The cloth consistency and its shape allow a simple cleaning phase and the re-usage of the filter. It can be used only for vacuuming dry waste; if combined with nylon filter it is possible to work for a longer period of time. Pneumatic filter shaker (international copyright) Through the selector, the airflow is inverted to feed an internal pneumatic hammer that shakes and blows the filter, cleaning it again completely. It is not necessary to touch the filter or worst to clean it outside the machine spreading again dust everywhere. Antistatic machines and accessories Using specific conductive materials and engineering, there’s the prevention of ignition sparks from the machine side, up to the end of any tool available for this machine range. Industrial Wet & dry vacuum cleaners

92. 92 Floor scrubber driers Next Evo • Designed for the maintenance and deep cleaning of large areas (up to 1.700 m²) • Especially suitable for cleaning: car shops, sales points, gym, health care • User friendly control panel • Hour meter • Automatic brush lifting (model 66BTA only) • Fully accessible recovery water tank with visual inspection • Automatic detergent measuring system • Big size traction wheels • Handle with control lever. Walk-behind floor scrubber driers Next Evo 55BT Next Evo 66BTA code 8.525.1301 8.525.1302 power supply 24V (battery charger included) 24V (battery charger included) scrubbing/squeegee width 550/800 mm 660/800 mm max working capacity 2200 m²/h 2640 m²/h solution tank capacity 55 l/14.5 gal 55 l/14.5 gal recovery tank capacity 55-65 l/14.52-17.17 gal 55-65 l/14.52-17.17 gal traction/traction motor automatic/200W automatic/200W RPM/pressure on the brushes 165/30 kg/66 lbs 175/33 kg/72 lbs brush motor power 550 W 2 x 400 W detergent solution system solenoid valve solenoid valve depression/vacuum motor 1200 mmH 2 O/400 W 1200 mmH 2 O/400 W dimensions/weight 128x71x106 cm/106 kg 128x71x106 cm/110 kg Standard equipment: • 0.108.0059 On-board Battery charger 24V 12A • 5.511.1113 PP brush Ø 533 mm - 21" Next Evo 55 • 2 x 5.511.1105 PP brush Ø 330 mm - 13" Next Evo 66 • 4.508.1524 Front squeegee blade L.860 mm Shore 33 Th. 4 mm • 4.508.1523 Rear squeegee blade L.900 mm Shore 40 Th. 4 mm Next Evo 55 Next Evo 66 • 4.508.X468 Front squeegee blade L.830 mm Shore 40 Th. 2.5 mm • 4.508.X467 Rear squeegee blade L.870 mm Shore 40 Th. 3 mm Watch the video on youtube: www.youtube.com/lavorpro

115. 115 Sweepers Equipped with: • Ideal for medium and large surfaces • Large filter surface with electric filter shaker • Side brush raising control • Suction switch off • Flap raise system • Panel filter in horizontal position • Main brush pressure regulation • Indirect back collection • Quick main brush release • Long life elastic belts • Reclining handle • Suction selection lever. Traction lever. Antistatic device. Wide collector tank • Heavy duty steel frame • Side brush mechanical engagement • Battery and battery charger not included. SWL 700 ET SWL 700 ET code 0.061.0001 main brush width 510mm/20,08 inc main brush + 1 side brush width 680mm/26,77 inc collector tank 45 lt/11,89 gal max working capacity 2620 m 2 /h-28201 ft 2 traction automatic max speed 4 km/h-2,49 mile/h motor type/power 12V/400W filtering surface 2 m 2 /21,53 ft 2 pressure on the brushes adjustable filter shaker electric dimension/weight 126x63x85cm/78kg Standard accessories: 0.961.0008 PP 0.961.0005 PP 0.961.0001 paper filter 14 μm Batteries Battery charger • 0.961.0026 Trolley for collector tank set Optional: 0.961.0018 HEPA panel filter 0.961.0016 PE panel filter 5μm ELECTRIC FILTER SHAKER (electric version) Walk-behind sweepers 0.961.0028 Side brush protection Watch the video on youtube: www.youtube.com/lavorpro

67. 67 Vacuum cleaners Jupiter code 0.065.0001 voltage 230V ~ 50Hz n°motors - power (max) 1 - 1100 W column depression 23 kPa/2300 mmH 2 O air suction 50 l/s total volume/dust/liquid 6,5 l./5 l./6 l. dimension/weight 55 x 35 x 63,5 cm/13 kg Wet & dry vacuum cleaners Code Description m Ø 3.753.0063 Roll of flexible hose without swivel 30 35 Code Description m Ø 3.753.0038 Roll of flexible hose without swivel 30 40 Code Description m Ø 5.209.0082 Flexible hose 5 40 6.205.0130 Flexible hose for Injection extraction 5 40 6.205.0131 Flexible hose for Injection extraction 10 40 Code Description Ø 3.752.0118 Sleeve tank side 35 3.752.0028 Swivel straight accessories side 35 3.753.0077 Swivel curved accessories side 35 Code Description Ø 3.754.0047 Sleeve tank side 40 3.754.0046 Straight accessories side 40 Flexible hose Ø 35 Flexible hose Ø 40 Complete flexible hose Ø 40

45. 45 High pressure cleaners Code Description 3.700.0022 Gun RL 30 3/8”F - M 24”F 3.701.0020 mm 1050 S. S. - M24”M - 1/8”F lance with nozzle-holder (nozzle not included) 4.618.0058 10 m H. P. Hose - 400 bar 3/8”F - 3/8”F - Ø 3/8” - max 150° C- R2 Code Max. pressure Length Inlet Outlet Max. temperature bar psi MPa m °C 4.618.0059 400 5801 40 10 3/8”F 3/8”F 135 Code Description Inlet Outlet 6.608.0071 Wall mount hose reel with brakets without hose 3/8”F 3/8”F For food industry For food industry Food industry high pressure accessories Steam hose R2 with rubber hose bend Ø 3/8” Wall mount hose reel Wall mount hose reel with brakets without hose (capability 20 m hose 3/8”) Code Description Inlet Outlet 3.749.0508 Varnished steel automatic hose reel 3/8”M 3/8”F 3.749.0510 Stainless steel automatic hose reel 3/8”M 3/8”F 3.749.0509 Varnished steel automatic hose reel with 20mt hose 3/8”F 3/8”F Automatic hose reel Automatic hose reel (capability 20 m hose) High-pressure cleaner

27. 27 High pressure cleaners What changes among high-pressure cleaners with similar performances? It is necessary to consider besides pressure and delivery rate also the standard equipment (dimensions and type), optional functions (antiscale, total stop, etc.) and the manufacturing specifications (type of materials and applied technology). Nevertheless the most important aspect is the resistance to wear and tear and to continuous use, that raises progressively with the increase of manufacturing components specifications or moving up from a model to the next class one. • Linear pump: The movement of the (3) pistons occur through a system of connecting rods and crankshaft. The longitudinal axle of the pistons (placed at the same level or linear) is perpendicular to the motor rotation axle. It is more versatile to bear high delivery rates (from 21 l/ min) and it has a better self priming. • Water cooled motor: Water flows through the S. S. coil around the motor, this allows a better thermal exchange (and so a cooling) than air also in those countries where inlet water could reaches 60°C. This allows a drop in operating temperature of the motor and pump mechanical elements, granting a better reliability and longer life. • Total Stop: Releasing the gun trigger the pump stops automatically avoiding element damages during the by-pass phase. Pulling the trigger, the high-pressure cleaner starts automatically. Max pump protection. • Low voltage and delayed Total Stop: To avoid quick and multiple start and shut down of the motor/pump group whenever the gun trigger is pulled and released, this disposal delays of about 15 seconds the machine shut down. Prevention, energy saving, top safety and pump longer life. • Low voltage and delayed Total Stop with intelligent shut down: To avoid quick and multiple start and shut down of the motor/pump group whenever the gun trigger is pulled and released, this disposal delays of about 15 seconds the machine shut down. In case the machine is unused for more than 20 minutes or there are leakages in the pressure circuit, the machine shuts down automatically and completely: control panel power cut-off. Prevention, energy saving, top safety and pump longer life. • Motor low rotation speed: The electric motor transfers the same number of revolutions to the pump. With a 4 poles motor there is a lower rotation speed of the components (1400 RPM in case of 50Hz or 1750 RPM in case of 60 Hz) granting longer pump life. Extending lifetime solution. • Pressure accumulator: The release of the gun trigger produces a strong counterstroke in the pump. This device amortizes this power with great benefit for the pump components and for the user, because it removes all the vibrations. Hot water high-pressure cleaner

14. 14 High pressure cleaners Cold water high-pressure cleaner Vanguard line Arizona LP Equipped with: • 4 poles electrical motor (1450 RPM) with thermal protection. • Three ceramic coated pistons, brass linear pump head with built-in by-pass valve. • Suction and delivery S. S. valves. • Detergent built-in tank for indirect suction. • Pressure regulator. • Glicerine pressure gauge. • Hose reel (optional) . • Accessory holder. • Hose-holder. • Ergonomic handle. • 7,5 lt. detergent tank. Standard equipment: • 6.001.0107 Gun M22 • 6.002.0322 Lance M22. • 5.012.0478 High pressure nozzle set (mod. 1209 LP) • 5.012.0401 High pressure nozzle set (mod. 1311 LP) • 4.618.0128 High pressure hose 8 m • Power cable 5 m Available versions: Code: 8.665.0110 Arizona 1311 LP with hose reel (10 m high pressure hose code 4.618.0053) Code: 3.749.0472 Rotox head (mod. 1209 LP) 1450 Arizona 1209 LP Arizona 1311 LP code 8.665.0101 8.665.0106 operat. pressure/max 120/150 bar-1740/2175 psi 130/150 bar-1885/2175 psi delivery rate 510 l/h-2.23 GPM 660 l/h-2.90 GPM abs. power/voltage 2300W - 230V~50Hz 1 ph 2900W - 230V~50Hz 1 ph motorpump type/RPM MP4/1450 RPM MP4/1450 RPM max. water inlet temperature 40 °C 40 °C dimension/weight 59x37x87cm/26 Kg - 57 lbs 59x37x87cm/28 Kg - 61 lbs OPTIONAL Available also version with hose reel Code: 8.665.0110

111. 111 Sweepers VRLA batteries divide themselves depending on the condition (liquid or gel) of the acid solution (that enables energy exchange) and on the way it is kept inside the battery: if it is liquid and kept by a spongy and filamentous material, the battery is called AGM; if it is a gel solution inside a membrane, the battery is called GEL battery. On the market there are a lot of products completely different in features and value and it is very important to know the manufacturing details to couple the right battery charger (it is not sure that any battery charger is suited and get a better result than the ones in our range that are specific for our batteries) and to come up to the working expectations. Whatever technology may be it is important to know that batteries have a common effect of self discharge (different for each type of manufacturing technology) and so it is important a recurrent charge (each three months approximately) if they are unused for long periods of time. Batteries suffer from incomplete charge cycle (except “pure lead” technology) and so it is necessary to charge them at the end of the working day (our battery charger is going to supply only the necessary energy and the charge cycle is going to finish earlier). It is also important not to cut off the charge before the battery charger has finished the cycle (green light). Respecting these simple rules, the best result and the best machine output will be obtained. • Belt drive The circular section grants a high resistance, stillness, reliability and it doesnt need service. • Side brush exclusion It is a system protecting bristles during machine stop or whenever it is not necessary to use it. • Dust vacuum system It can be found in the main brush area. Together with the mechanical action, it conveys waste and dust that are collected into the tank through the right filters supplied. • Front dust vacuum system As well as traditional vacuum system, a vacuum system can be found in the lateral brush/es collection area. Dust dispersion outside the machine is limited also before the main collection area is reached. • Flap raise system The main brush collection area is delimited by protections (flaps) touching the ground, better vacuum effect. Whith a big residual is possible to raise the flap collecting it rather than keep going pushing it on the floor • Filter shaker It clears filter from dust without touching it or opening the sweeper; the vacuum efficiency is kept at max, granting the best comfort and output for the user. Sweepers

15. 15 High pressure cleaners Cold water high-pressure cleaner Vanguard line Standard equipment: • 3.700.0036 Gun M22 - 3/8. • 3.701.0027 Lance M22 high/low pressure • 3.103.0050 Nozzle type 045 (mod. 1211 LP) • 3.103.0047 Nozzle type 030 (mod. 1509 LP) • 4.618.0049 High pressure hose 8 m • Power cable 5 m Tucson LP single-phase 1450 Tucson 1211 LP Tucson 1509 LP code 8.671.0001 8.671.0002 operat. pressure/max 120/150 bar-1740/2175 psi 150/160 bar-2175/2320 psi delivery rate 660 l/h-2.91 GPM 540 l/h-2.37 GPM abs. power/voltage 3000W - 230V~50Hz 1 ph 3000W - 230V~50Hz 1 ph motorpump type/RPM MP4/1450 RPM MP4/1450 RPM max. water inlet temperature 40 °C 40 °C dimension/weight 76x41x75cm/33 kg - 72,6 lbs 76x41x75cm/33 kg - 72,6 lbs Equipped with: • 4 poles electrical motor (1450 RPM) with thermal protection. • Three ceramic coated pistons , brass linear pump head with built-in by-pass valve. • Suction and delivery S. S. valves. • Detergent built-in tank for indirect suction (2,8 lt.). • Pressure regulator. • Glicerine pressure gauge. • Hose-reel (optional) . Available versions: Code: 8.671.0005 Tucson 1509 LP with hose reel (10 m high pressure hose code 4.618.0053) OPTIONAL Available also version with hose reel Code: 8.671.0005

38. 38 High pressure cleaners High-pressure cleaner 3.103.0027 high-pressure nozzle 0.30 3.103.0037 high-pressure nozzle 0.35 3.103.0028 high-pressure nozzle 0.40 3.103.0034 high-pressure nozzle 0.45 3.103.0029 high-pressure nozzle 0.50 3.103.0030 high-pressure nozzle 0.55 3.103.0031 high-pressure nozzle 0.60 3.103.0025 high-pressure nozzle 0.70 3.103.0070 high-pressure nozzle 0.75 3.103.0033 high-pressure nozzle 0.90 3.103.0047 high-pressure nozzle 0.30 3.103.0048 high-pressure nozzle 0.35 3.103.0049 high-pressure nozzle 0.40 3.103.0050 high-pressure nozzle 0.45 3.103.0051 high-pressure nozzle 0.50 3.103.0052 high-pressure nozzle 0.55 3.103.0053 high-pressure nozzle 0.60 3.103.0055 high-pressure nozzle 0.70 3.103.0056 high-pressure nozzle 0.75 3.103.0058 high-pressure nozzle 0.85 3.749.0200 rotary nozzle max 500 bar - 0.40 3.749.0201 rotary nozzle max 500 bar - 0.45 3.749.0202 rotary nozzle max 500 bar - 0.50 3.749.0203 rotary nozzle max 500 bar - 0.55 3.749.0204 rotary nozzle max 500 bar - 0.60 3.749.0205 rotary nozzle max 500 bar - 0.65 3.749.0206 rotary nozzle max 500 bar - 0.70 3.714.0020 rotary nozzle max 350 bar - 0.40 3.103.0018 high-pressure nozzle 0.30 3.103.0020 high-pressure nozzle 0.35 3.103.0009 high-pressure nozzle 0.40 3.103.0016 high-pressure nozzle 0.45 3.103.0017 high-pressure nozzle 0.50 3.103.0019 high-pressure nozzle 0.55 3.103.0021 high-pressure nozzle 0.60 3.103.0067 high-pressure nozzle 0.70 3.103.0068 high-pressure nozzle 0.75 3.103.0069 high-pressure nozzle 0.90 nozzle 0° nozzle 15° (standard) nozzle 25° High-pressure nozzle Rotary head nozzle Rotary nozzle max 350/500 bar: G 1/4”F with S. S. body and seat/nozzle in highly shock-resistant tungsten carbide Extension set for rotary nozzle: 1/4”M - 1/4”M codes 3.749.0004 + 4.006.0099 Spare coupling for gun M 22 Sand-blasting head 3.749.0207 Sand blasting head - blade type 3.749.0208 Sand blasting head - round type 3.749.0209 Sand blasting head - prolonged type 3.749.0434 nozzle 0.40 3.749.0433 nozzle 0.45 3.749.0432 nozzle 0.50 1) Sand-blasting heads max 250 bar, are not supplied with nozzles. Orders will be always placed with the nozzle required. Sand-blasting heads max 250 bar Sand-blasting nozzles 2) Prolonged adjustable probe for sand-blasting 3.749.0210 S. S. prolonged adjustable Ø 21 probe L = 500 mm 1 2

16. 16 High pressure cleaners Standard equipment: • 3.700.0030 Gun M22 - 3/8 with rotating coupling ). • 3.701.0027 Lance M22 high/low pressure • 3.103.0052 Nozzle type 055 • 4.618.0143 High pressure hose 10 m • Power cable 5 m Tucson LP three-phase 1450 Tucson 1713 LP Tucson 2017 LP code 8.671.0003 8.671.0004 operat. pressure 170 bar-2465 psi 200 bar-2900 psi delivery rate 780 l/h-3.43 GPM 1000 l/h-4.4 GPM abs. power/voltage 5200W - 400V~50Hz 3 ph 7500W - 400V~50Hz 3 ph motorpump type/RPM MPW4/1450 RPM MPW4/1450 RPM max. water inlet temperature 40 °C 40 °C dimension/weight 76x40x75cm/42 kg - 92,4 lbs 76x40x75cm/44 kg - 96,8 lbs Cold water high-pressure cleaner Vanguard line Equipped with: • 4 poles electrical motor (1450 RPM) with thermal protection and water cooling • Three ceramic coated pistons (Tucson 2017). Three full ceramic pistons (Tucson 1713). Brass linear pump head with built-in by-pass valve. • Suction and delivery S. S. valves. • Low voltage and delayed Total Stop • Detergent built-in tank for indirect suction (2,8 lt.). • Pressure regulator. • Glicerine pressure gauge. • Hose-reel (optional) . Available versions: Code: 8.671.0006 Tucson 1713 LP with hose reel (10 m high pressure hose code 4.618.0054) Code: 8.671.0007 Tucson 2017 LP with hose reel (10 m high pressure hose code 4.618.0054) OPTIONAL Available also versions with hose reel Code: 8.671.0006 Code: 8.671.0007

128. 128 Steam generators Equipped with: • Stainless steel body AISI 304 • Ready steam warning lamp • Boiler 3 kW S. S. AISI 304 - Thickness 25/10 • Low level water lamp indicator • Boiler is refilled continuously • Switch for using chemicals and detergents mixed with steam • Device for cleaning hot water mixed with steam • Washable filter • Flex hose 4 m • Recovery tank capacity 64 l • Drain hose system • Steam regulation • Wheels suitable for use in food processing area • ON/OFF main switch with indicator lamp • ON/OFF boiler switch with indicator lamp • Boiler capacity 4 litres. • Suction speed Control Vacuum steam generators with foam system GV Etna 4.1 FOAM GV Etna 4.1 Foam Code 8.451.0208 Max steam pressure/temperature 7 bar/165° C Boiler absorbed power 3000 W/230V ~ 50Hz (Ph 1) Vacuum motor absorbed power 1200 W Column depression/Air flow 20.39 kPa/220 m³/h Water tank/detergent tank capacity 5 l/5 l Watch the video on youtube: www.youtube.com/lavorpro • 6.402.0106 • 6.402.0113 • 5.211.0123 Hose 4 m • 3.753.0141 • 3.754.0278 • 3.754.0005 • 6.405.0245 • 3.754.0194 • 3.754.0215 • 3.754.0196 • 3.754.0197 • 3.754.0204 • 3.754.0260 • 5.212.0178 • 4.408.0454 - Sponge accessory Standard equipment: • 3.697.0072 1l. LC prefoam • 3.754.0271

43. 43 High pressure cleaners Gun with extensible telescopic lance Code Pressure Flow rate Length Coupling Temperature bar psi MPa l/m GPM min. mm max. mm A °C °F 3.749.0488 250 3625 25 40 10.5 2000 5000 3/8”M 150 302 Code : 4.018.0067 Spare hose Code : 3.100.0021 Coupling 1/4”M-1/4”M Code : 3.100.0022 Coupling 1/4”M-3/8”M Code : 6.002.0322 Prolunga Extension pipe Included A: 3/8”M Quick coupling + + Quick coupling code: 4.607.0275 + adapter for nozzle 1/4” code: 3.100.0032 Quick coupling code: 4.607.0275 + adapter for nozzle 1/8” code: 3.100.0338 Floor Cleaning Lance code 6.602.0020 operat. pressure 250 bar - 3625 psi allowed pressure 280 bar - 4060 psi operat. delivery rate 1200 l/h - 5,3 GPM nominal temperature 160° C nozzle dimension .060 Motorized head code 3.749.0196 operat. pressure 220 bar - 3190 psi allowed pressure 250 bar - 3625 psi operat. delivery rate 1260 l/h - 5,56 GPM nominal temperature 90° C min. diameter Ø 40 mm nozzle type 2 x M4 • S. S. motorized head for case and tank cleaning • Complete orbital internal coverage • Complete with nozzles and converter for Thermic 13H and Thermic 17 HW in combination with M24 nipple cod. 3.749.0320 for Thermic 13H and Thermic 17 HW in combination with M24 nipple cod. 3.749.0320 • S. S. floor cleaning lance (nozzle not included) • Complete with RL 35 gun • For washing terraces and external floors in general. Motorized head Floor Cleaning Lance High-pressure cleaner

139. 139 Foamjet Standard accessories: • Professional gun. • Lance with nozzle. • Integrated inlet and outlet quick. • Chemical use hose and gasket. 600 mm Foamjet 24 10 m 10 m 900 mm Foamjet 50 code 0.906.0035 code 0.906.0036 code 0.906.0084 code 0.906.0084 FOAMJET SV24 FOAMJET SX24 FOAMJET SV50 FOAMJET SX50 code 0.006.0007 0.006.0009 0.006.0008 0.006.0010 capacity/model 24 l/painted 24 l/S. S. 50 l/painted 50 l/S. S. working pressure 6 bar 6 bar 6 bar 6 bar safety valve max 8 bar max 8 bar max 8 bar max 8 bar pressure indicator pressure gauge pressure gauge pressure gauge pressure gauge level indicator external column external column external column external column recharging air operating air operating air operating air operating pressure regulator manual manual manual manual gun connection 1/4" G-F 1/4" G-F 1/4" G-F 1/4" G-F hose type rilsan rilsan rilsan rilsan hose/lance lenght 10 mt/600 mm 10 mt/600 mm 10 mt/900 mm 10 mt/900 mm dimension/weight 28x32x75 cm/15 kg - 33,06 lbs 28x32x75 cm/11 kg - 24,25 lbs 45x42x100 cm/25 kg - 55,11 lbs 45x42x102 cm/18 kg - 39,68 lbs Chemicals & sprayers Continuous pneumatic foam sprayers need a permanent connection to an air compressor; in this way air mixes with the chemical product producing a soft and voluminous foam that persists on surfaces: with a little chemical product, it is possible to treat wider areas or tough dirt (also on ceilings, inclined and/or slippery walls). They work at high-pressure and so they use capacious steel or stainless steel tanks to allow a greater working autonomy.

119. 119 Steam generators Steam at 180°C allow to degrease dirt also without the use of heavy chemical products. If they are necessary to speed up the washing task, it is very important to consider the cost of draining away dirty water. The danger of chemical products used is generally proportional to the effectiveness against increasing dirt tenacity. If we wash with the high-pressure cleaner we produce from 10 to 21 litres of polluted water, that must be collected and drained following the current regulation: in a single wash of a couple of hours 2,5 tons of dirty water is produced! If we wash with a steam generator, the most powerful machine produces 37 litres per hour, with the most part of the liquid that evaporates, with a two hour wash the remaining dampness and disinfecting product is very low! Analyzing all these subjects it is clear that in particular circumstances (lack of purification plant for water treatment), the steam generator is more advantageous of a high-pressure cleaner. On the other side, rinsing speed is the consequence to the delivery rate that hits dirt, so if only the washing phase is considered, high-pressure cleaner is faster. Steam can be considered water with a related dampness very, very low (superheated steam is just hot air and it doesn’t have a significant mechanical action...), with an outlet temperature much higher (180°C) than a high-pressure cleaner: this means that the mechanical power is lower than the one of water, but the degreasing power of steam is much higher. • Discharge valve: Allows a complete discharge of the boiler (not possible even through gun use). In this way it is possible to remove water and limestone residual inside the boiler and from the coil surface. This valve maybe opened only when the boiler is not hot, and it is recommended to accomplish regularly. • Unlimited autonomy: The boiler is refilled by a water pump that gets water from an external water tank. This system allows an unlimited autonomy, because it is not necessary to turn off the steam generator and wait a lower temperature to refill with water. An automatic control recharges the boiler when necessary. In some models there is an acoustic signal advising about low water level inside the water tank. • Integrated vacuum: Dirt is vacuumed inside a tank integrated in the machine • Multipurpose washable filter It combines all the advantages of the cartridge filter but with the plus that it can vacuum both dry and wet at the same time. It can be washed with tap water. • Foam system: the machine is equipped with connection for compressed air and pressure gauge for foam cleaning. Using the lance with the hose a thick foam can be produced that will stay on the dirty components, giving more effectiveness to the detergent. Steam generators

51. 51 Vacuum cleaners Dry vacuum cleaners Silent code 8.246.0001 voltage 230-240V ~ 50-60Hz n°motors - power 1 - 800 W column depression 24 kPa/2400 mmH 2 O air suction 44 l/s total volume 12 l. dimension/weight 39x39x42 cm/6,8 kg Professional ultra silent vacuum cleaners LavorPro were conceived to meet the needs of floor care sector. Equipped with: • Silenced single stage motor (high efficiency). • Integrated accessory holder. • Shock and overturn proof design. • 12 litre plastic tank (PP) • Cloth filter • Rotating ON/OFF switch • Paper collector filter. • Accessories Ø 35 Optional: • code. 5.212.0023 Paper collector filter set (10 pcs) • code. 5.212.0149 Microfiber collector filter set (10 pcs) • code. 6.205.0199 Paper collector filter set (300 pcs) • code. 6.205.0200 Paper collector filter set (550 pcs) • code. 3.754.0081 Brush carpet Turbo brush Type 2 • code. 5.212.0163 HEPA filter Standard equipment: • 5.209.0210 Hose 2 m • 6.205.0187 • 3.754.0005 • 3.754.0015 • 3.754.0281 • 3.754.0004 • 3.752.0115 • 5.209.0207 LONG LIFE MOTOR • Power cable 7,5 m Watch the video on youtube: www.youtube.com/lavorpro Silent 665/2013 - II B 30.5 A B C DEFG AB CD E F G AB C D EFG 76 dB kWh/annum SILENT/ECHO/SP112D

137. 137 Device for dense foam production Foam box Device for dense foam production and spreading. Easy to install, it requires only compressed air connection and power supply. Ideal for cleaning: car body, car interiors, bathrooms, kitchens, slaughterhouses, food processing areas, health care settings, cellars. Optional: 3.697.0059 4x5 kg foaming cleanser for commercial vehicles 3.697.0057 4x5 Kg alkaline foaming cleanser for food industry 3.697.0058 4x5 Kg foaming cleanser for hygiene facilities 3.697.0056 4x5 kg foaming cleanser for cloth and carpets • 8m hose 3.099.0705 • 6.402.0109 Standard equipment: Foam box code 6.608.0074 voltage 220-240V ~ 50Hz pumps no. - power 2 - 100W air pressure 4 bar delivery rate 1 l/m detergent concentration 4% dimension/weight 44 x 13 h 25/3 Kg

77. 77 Floor scrubber driers • Number of disc brushes : The scrubbing group meets different cleaning path need with 1, 2 or 3 disc brushes. • Number of cilindric brushes: Scrubbing group offer 1 or 2 roller brush solutions toge - ther with the sweeping capability. Bristles of different material allows perfect cleaning in any conditions, (carpet and parquet included). • Cilindric brush quick connection and release: The fi ttings and releasing of brushes is toolless. Ordinary cleaning maintenace are simple and quick for anybody. • Constant brush pressure: The pressure of brushes on the floor is made by the heavy brush plate that follows irregularity on the floor and gives always the top pressure without any adjustment still with shorter bristles. • Solenoid valve: Together with the reliable mechanical solution faucet, this system reduce chemical consumption and avoid solution waste. The flow is open only when brush is working, there is no accidental leak with machine stopped. The system is protected by a filter with easy maintenance. • Integrated battery charger Some models are equipped with integrated battery charger, other ones have the predisposition only. It is possible to charge batteries in different rooms, without coming back to the same place. • Integrated battery Standard integrated battery is built with a maintenance free technology and it does not require restrictions about the place for battery charging. The non stop research allow to use always up-to-date batteries that combined with appropriate battery charger grant machine top performances. • Hour meter Useful to check work sessions and to plan stops for battery charging. Best output and investment protection. • Charge meter and battery protection It informs when the autonomy is finishing , allowing the end of the cleaning task (stopping brushes first and then the rest). It prevents damages to the batteries, preventing the complete discharge with any kind of technologies. • Eco Energy System no-stop and separate control of water quantity and chemical product concentration with automatic and delayed stop of the supply when the machine stops (Automatic Detergent Measuring System). • U-turns in closed area The space (length X width) needed to make a U-turn is the min. width in which it is possible to work with the machine. The smaller this room is, the higher the machine output, because less maneuvering is needed. The technical features of our floor scrubber driers (the front wheel shaft is close to the rear one in the walk behind models and the tight steering radius of ride-on ones) grant the minimum room for U-turns. On each ride-on models there is an automatic device that lowers speed when turning, raising the safety level also for inexperienced users. Floor scrubber-driers Applications pads BEIGE PAD - POLISHING - Polyester To polish all kinds of floor. Use dry. GREEN PAD - INTERMEDIATE CLEANING ACTION - Nylon To remove all the old superficial wax, rests, obtaining ready floors to be recoated. Use wet. BLACK PAD - WET STRIPPING - Nylon For wet stripping of heavy layers of wax. Ideal to remove old floor finish scu and cement marks.

50. 50 Vacuum cleaners Dry vacuum cleaners Silent FR code 8.246.0007 voltage 220-240V ~ 50-60Hz n°motors - power 1 - 800 W column depression 24 kPa/2400 mmH 2 O air suction 44 l/s total volume 12 l. dimension/weight 39x39x42 cm/6,8 kg Professional ultra silent vacuum cleaners LavorPro were conceived to meet the needs of floor care sector. Equipped with: • Silenced single stage motor (high efficiency). • Integrated accessory holder. • Shock and overturn proof design. • 12 litre plastic tank (PP) • HEPA filter • Rotating ON/OFF switch • Microfiber collector filter HEPA flow • High visibility safety power cable 12 m. Optional: • code. 5.212.0023 Paper collector filter set (10 pcs) • code. 5.212.0149 Microfiber collector filter set (10 pcs) • code. 6.205.0199 Paper collector filter set (300 pcs) • code. 6.205.0200 Paper collector filter set (550 pcs) Standard equipment: • 5.209.0220 Hose 2 m ø 32 • 3.753.0138 • 3.754.0269 • 3.754.0270 • 3.754.0267 • 3.754.0268 • 3.752.0279 • 5.212.0163 LONG LIFE MOTOR • High visibility safety power cable 12 m Silent FR 665/2013 - II B 30.5 A B C DEFG AB C D E F G AB C D EFG 76 dB kWh/annum SILENT FR Watch the video on youtube: www.youtube.com/lavorpro

78. 78 Floor scrubber driers Floor scrubber-driers E = ELECTRIC B = BATTERY BT = BATTERY with TRACTION A = Automatic brush plate lifting for walk behind Page Power supply Brushes Scrubbing width Squeegee width Max working capacity Solution tank capacity Recovery tank capacity Packaging Weight Weight pcs x pallet Code Model V n° mm mm m 2 /h - ft 2 /h l/gal l/gal L x l x H cm/inc kg lbs n° 8.501.0501 Sprinter 80 230V/50HZ 1 290 320 1015-10925 2,8/0,74 5,6/1,48 116X40X36/46x16x14 17 37 10 8.501.0508 Crystal Clean 82 230V/50HZ 1 290 320 1015-10925 2,8/0,74 5,6/1,48 100x40x42/39x16x17 19 42 15 8.518.0004 Quick 36E 84 230V/50HZ 1 360 460 1260-13562 11/2,91 12/3,17 81x56x80/32x22x32 62 135 1 8.518.0003 Quick 36B 84 12V 1 360 460 1260-13562 11/2,91 12/3,17 81x56x80/32x22x32 70 154 1 8.524.3302 Speed 45E Eco 86 230V/50HZ 1 450 800 1575-16952 25/6,61 28/7,39 113x61x110/44x24x43 93 205 1 8.524.0002 Speed 45B 86 24V 1 450 800 1575-16952 25/6,61 28/7,39 113x61x110/44x24x43 73 161 1 8.524.1002 Speed 45B 86 24V 1 450 800 1575-16952 25/6,61 28/7,39 113x61x110/44x24x43 114 251 1 8.580.0001 Dynamic 45E 88 230V/50HZ 1 450 540 1500-16145 30/7,9 35/9,24 117x58x78/46x22x30 88 194 1 8.580.0002 Dynamic 45B 88 24V 1 450 540 1500-16145 30/7,9 35/9,24 117x58x78/46x22x30 74 163 1 8.580.0003 Dynamic 45B 88 24V 1 450 540 1500-16145 30/7,9 35/9,24 117x58x78/46x22x30 112 247 1 8.527.0003 Free EVO 50E 90 230V/50HZ 1 500 800 2000-21527 44/11,63 50/13,21 125x57x116/49,5x22,5x46 117 258 1 8.527.0004 Free EVO 50B 90 24V 1 500 800 2000-21527 44/11,63 50/13,21 125x57x116/49,5x22,5x46 83 183 1 Model Scrubbing width Next EVO 66 BTA Nomenclature Sprinter Crystal Clean Quick Free Evo Speed Easy-R Next Evo Dynamic

141. 141 Chemicals products MODEL DESCRIPTION FIELDS PROPERTIES USE: LCB-900WR code 3.697.0030 FRAGRANCE-FREE WAX REMOVING DETERGENT Removes any type of wax or polymer (even if old or stratified). According to the degree of dirt and the thickness of the film, dilute in water from 1% to 10%. In extreme situations, dilute in water up to 20%. Ph 8,8 - 9,2 1,000 g/ml 5000 ml x 4 pz. MODEL DESCRIPTION FIELDS PROPERTIES USE: LCB-740F code 3.697.0031 ALKALINE MULTIPURPOSE DETERGENT Dissolves and detaches organic and inorganic dirt. On all types of hard washable surfaces, ceramic or enamelled surfaces, windows and doors, equipment and industrial machi - ne tools. Dilute in water from 1% to 2%. Ph (sol. 1%) 6.9 - 7.9 1,000 g/ml 5000 ml x 4 pz. MODEL DESCRIPTION FIELDS PROPERTIES USE: LCN-600SVF code 3.697.0033 SOLVENT DETERGENT OF VEGETABLE ORIGIN Eliminates tar, rubber, glue and adhesive residues. Removes even stratified (acrylic or polymer) wax films. Disintegrates persistent dirt of animal or mineral origin. According to the degree of dirt and thickness of the film, dilute in water from 0.5% to 2%. Ph 5,8 - 6,2 0,950 g/ml 5000 ml x 4 pz. MODEL DESCRIPTION FIELDS PROPERTIES USE: LCN-700 code 3.697.0035 CARPET AND TEXTILE WASH DETERGENT Removes dirt, regenerates and protects fibres. Does not leave residues and releases a pleasant fragrance. Dilute in water from 2% to 5%. Ph 6.8 - 7.2 1,010 g/ml 5000 ml x 4 pz. S4 S3 S1 T1 T7 T6 T1 T2 T7 T4 T1 T2 T5 T7 T6 T3 T5 S4 S4 S3 S3 S2 S2 S1 S1 S1 Technology T4 high-pressure cleaner T7 floor scrubber- drier T2 sprayer T3 carpet cleaner T6 single disc machine T5 steam cleaner T1 manual cleaning Fields S4 building S3 food industry S2 mechanical industry S1 vehicles

140. 140 Chemical products Technology T4 high-pressure cleaner T7 floor scrubber- drier T2 sprayer T3 carpet cleaner T6 single disc machine T5 steam cleaner MODEL DESCRIPTION FIELDS PROPERTIES USE: LCN-800F code 3.697.0023 FRAGRANCE-FREE SANITISING DETERGENT Destroys unpleasant odours, fights the proliferation of bacte - ria, harmful micro-organisms, fungi and moulds. Contains quaternary ammonium salts. On all types of hard surface, dilute from 1 to 3%. In the case of tenacious contaminations and aggressive unpleasant odours, dilute up to 6%. Ph 7.8 - 8.2 1,000 g/ml 5000 ml x 4 pz. MODEL DESCRIPTION FIELDS PROPERTIES USE: LCN-800 code 3.697.0024 FRAGRANCE SANITISING DETERGENT Destroys unpleasant odours, fights the proliferation of bacte - ria, harmful micro-organisms, fungi and moulds. Contains quaternary ammonium salts. Leaves a fresh and long-lasting fragrance in the enviroment. On all types of hard surface, dilute from 1 to 3%. In the case of tenacious contaminations and aggressive unpleasant odours, dilute up to 6%. Ph 7.8 - 8.2 1,000 g/ml 5000 ml x 4 pz. MODEL DESCRIPTION FIELDS PROPERTIES USE: LCN-680AL code 3.697.0025 ALCOHOLIC MAINTENAN - CE DETERGENT Quick-drying universal neutral detergent. Anti-dust effect for 4-5 days. Leaves a pleasant fragran - ce in the environment. Does not leave residues. On all types of washable shiny or hard surface such as glass, stone or ceramic, dilute with water from 0.5% to 1 %. Ph 6,6 - 7,0 1,000 g/ml 5000 ml x 4 pz. MODEL DESCRIPTION FIELDS PROPERTIES USE: LCN-650 code 3.697.0026 NON ALCOHOLIC MAINTENANCE DETERGENT Universal neutral detergent, does not corrode polymers, natural or synthetic waxes. Leaves a pleasant fragrance in the envi - ronment. Does not leave residues. On all types of washable hard surfaces, even if protected by wax and/or sealants, dilute in water to 0.5%-1%. Ph 6,3 - 6,7 1,000 g/ml 5000 ml x 4 pz. MODEL DESCRIPTION FIELDS PROPERTIES USE: LCN-640WM code 3.697.0027 NON STRATIFYING WAX WASH DETERGENT Cleans and shines surfaces. Regenerates protective and wax treatments. Non filmogenous and leaves a pleasant fragrance in the environment. On all types of washable hard surfaces, including floors pro - tected by wax and/or sealants, dilute in water to 0.5%-1%. Ph 8,8 - 9,2 1,000 g/ml 5000 ml x 4 pz. T1 T2 T3 T5 T7 T1 T2 T3 T5 T7 T1 T3 T5 T7 T1 T3 T7 T1 T2 T3 T5 T7 T1 manual cleaning Fields S4 building S4 S4 S4 S3 food industry S4 S3 S4 S3 S2 mechanical industry S1 vehicles S1 S1

75. 75 Industrial vacuum cleaners DMX80 1-22 DTX80 1-30 5.209.0021 Flexible hose Ø 40 mm - 2,5 m O O 5.209.0127 Flexible hose Ø 40 mm - 4,0 m O O 5.209.0082 Flexible hose Ø 40 mm - 5,0 m O O 6.205.0126 KIT chromium plated pipe + curved chromium plated pipe Ø 40 mm O O 3.754.0048 Flat lance 250 mm - Ø 40 mm O O 3.754.0049 Roud brush - Ø 40 mm O O 3.754.0083 Multipurpose accessories Ø 40 mm - 400 mm O O 3.754.0185 Multipurpose accessories Ø 40 mm - 300 mm O O 3.754.0084 Bristle accessory for dry suction (for floors) 400 mm O O 3.754.0169 Bristle accessory for dry suction (for floors) 300 mm O O 3.754.0085 Accessory for wet suction 400 mm O O 3.754.0170 Accessory for wet suction 300 mm O O 3.754.0086 Accessory for carpet 400 mm O O 3.754.0171 Accessory for carpet 300 mm O O 3.754.0046 swivel straight sleeve Ø40 mm (accessory side) O O 3.754.0047 Straight sleeve Ø40 mm (tank side) O O 3.753.0038 Flexible hose Ø40 mm - 30 m O O O = optional Optional accessories Industrial Wet & dry vacuum cleaners

42. 42 High pressure cleaners THERMIC 5 H THERMIC 6,5 THERMIC 9 L 3.700.0030 Gun 3/8” - M22 • • 3.700.0025 Gun RL 30 3/8”M - 1/4”F (only for lance 6.602.0049 - 6.602.0050) • • 4.618.0012 10 m H.P. Hose - 3/8" - Ø 5/16" - 310 bar • 4.618.0056 20 m H.P. Hose - 3/8" - Ø 5/16" - 400 bar • 4.618.0059 10 m H.P. Hose for steam - 3/8" - Ø 3/8" (MAX 135°C) • 4.018.0003 8 m H.P. Hose - 1/4" - M22 - Ø 1/4" - 210 bar • 6.602.0049 mm 1700 S. S. 1/4"M - 1/8”F high/low press. (for det. suction) for gun 3.700.0025 • • 6.602.0050 mm 1700 S. S. 1/4”M - 1/8”F lance with nozzle-holder - for gun 3.700.0025 • • 6.602.0040 Lance Rotox type 1 M22 - 0,45 • 6.602.0056 Lance Rotox M22 - 0,35 • • 6.602.0027 M22 - 0,40 Widia sand-blasting lance • • 3.701.0025 Double lance mm 500 with regulator knob max 250 bar with nozzle holder • • • 6.602.0003 Foam lance max temperature 90° C. For gun M 22 max 250 bar • • • 6.602.0055 Foam lance with regulator max temp. 60° C - with M22 coupling • • • 6.602.0053 Foam lance with regulator max temp. 60° C - M22 coupling with tank 1 lt. • • • 3.102.0011 Water filter 3/4» F - 3/4» M 80 microns • • • 0.011.0001 Calibrated sand - 6 pieces of 5 kg each • • • Accessories High-pressure cleaners with combustion engine • = suitable High-pressure cleaner Water flow adjuster coupling Code Inlet Outlet Max. pressure Max flow rate Max temperature A B bar psi MPa l/m GPM °C °F 3.703.0023 M22 Ø14 M22F Ø14 280 4061 28 30 7.93 160 320 3.703.0024 1/4” M M22F Ø14 280 4061 28 30 7.93 160 320 3.703.0009 1/4” M 1/4” F 280 4061 28 30 7.93 160 320 A B

142. 142 Foaming detergent for commercial vehicles Monocomponent and alkaline detergent based on selected surfactants with a penetrating and softening action against both organic and inorganic dirt. It acts quickly and permanently, leaves no residue, is easy to rinse, does not alter painted parts made of plastic or rubber. Thanks to its high content of sequestrants, it maintains its detergent power even in the presence of hard water. Suitable for self-service high pressure washing plants, it can also be used in washing systems with nebulizer. Alkaline foaming cleanser for food industry Alkaline chloroactive fast-acting product, it cleans and sanitizes the surfaces and the equipment which are treated without leaving any residue. Used with a foaming nebulizer, it produces dense foam which sticks on the walls, enhancing its sanitizing action. Also suitable for floors, workbenches, equipment, etc..., it is used in dairy farms, slaughterhouses, salami factories, oil mills. T4 T4 T4 T2 T2 T2 T5 T5 T5 T5 T3 T3 T3 T3 Chemicals products for dense foam production CHEMICAL PRODUCTS FOR DENSE FOAM PRODUCTION Foaming cleanser for hygiene facilities Concentrated liquid detergent with acid pH. Ideal for cleansing stainless steel surfaces, it is used for cleaning and descaling all the acid-resistant surfaces. It effectively removes scale deposits, ferrous oxides and greasy surface dirt making the surfaces clean and without stains. Foaming cleanser for cloth and carpets Product indicated for cleaning car interiors made of fabric and of carpet. Formulated with special suspending additives that have the characteristic of breaking the physical- chemical bonds existing between fiber and dirt, attracting the latter to the surface. These substances also avoid the redeposit of dirt guaranteeing excellent cleaning results. Highly foaming, it has to be used with special extraction vacuum cleaners. It brightens the colors and leaves a pleasant perfume. LC 104F LC 102F LC 103F LC 101F 3.697.0059 4x5 kg 3.697.0057 4x5 kg 3.697.0058 4x5 kg 3.697.0056 4x5 kg NEW NEW NEW NEW S1 S3 S3 S1 Technology T4 high-pressure cleaner T2 sprayer T3 carpet cleaner T5 steam cleaner Fields S3 food industry S1 vehicles

74. 74 Industrial vacuum cleaners O = optional SMX77 2-24 SMX77 3-36 0.144.0047 Rubber sleeve for hose Ø 38 (2 necessary for hose 3.753.0050) O O 0.144.0001 Antistatic rubber sleeve for hose Ø 50 (2 necessary for hose 7.753.0053) O O 0.144.0002 Rubber sleeve for hose Ø 50 (2 necessary for hose 7.753.0051 o 7.753.0054) O O 3.753.0050 EVA CONDUCTIVE Ø 38 - min 5 mt or multiple, max 30 mt. (add also 2 x 0.144.0047, 2 x 3.099.1077 + 0.144.0011) O O 3.753.0051 EVA CONDUCTIVE Ø 50 - min 5 mt or multiple, max 30 mt. (add also 2 x 0.144.0002, 2 x 3.099.1077 + 0.144.0011) O O 3.753.0053 PUR ANTISTATIC Ø 50 - min 5 mt or multiple, max 30 mt. (add also 2 x 0.144.0001, 2 x 3.099.1077 + 0.144.0011) O O 3.753.0054 PUR OILPROOF Ø 50 - min 5 mt or multiple, max 30 mt. (add also 2 x 0.144.0002, 2 x 3.099.1077 + 0.144.0011) O O 3.099.1077 Steel clamps for rubber sleeve Ø 50/Ø 38 (2 pcs for each hose) O O 0.144.0011 Steel connection with button Ø 50/Ø 38 - accessory side O O 0.144.0012 Ø 50 - steel double curve with joint coupling O O 0.144.0013 Ø 50 - steel extension with joint coupling O O 0.144.0014 Ø 50 - steel flat lance mm 500 O O 0.144.0021 Ø 50 - antistatic rubber conic bend lance O O 0.144.0022 Ø 50 - antistatic rubber conic lance O O 0.144.0015 Ø 50 - antistatic rubber round lance O O 0.144.0019 Ø 50 - antistatic rubber suction lance O O 0.144.0026 Ø 50 - stainless steel accessory for dust suction O O 0.144.0027 Ø 50 - stainless steel accessory for wet suction O O 0.144.0017 Ø 50 - PVC flat lance O O 0.144.0018 Ø 50 - PVC round brush O O Optional accessories Industrial Wet & dry vacuum cleaners

79. 79 Floor scrubber driers Midi-R Floor scrubber-driers Page Power supply Brushes Scrubbing width Squeegee width Max working capacity Solution tank capacity Recovery tank capacity Packaging Weight Weight pcs x pallet Code Model V n° mm mm m 2 /h - ft 2 /h l/gal l/gal L x l x H cm/inc kg lbs n° 8.527.0001 Free EVO 50B 90 24V 1 500 800 2000-21527 44/11,63 50/13,21 125x57x116/49,5x22,5x46 84 187 1 8.527.0010 Free EVO 50B 90 24V 1 500 800 2000-21527 44/11,63 50/13,21 125x57x116/49,5x22,5x46 138 304 1 8.527.0011 Free EVO 50BT 90 24V 1 500 800 2000-21527 44/11,63 50/13,21 125x57x116/49,5x22,5x46 87 187 1 8.527.0002 Free EVO 50BT 90 24V 1 500 800 2000-21527 44/11,63 50/13,21 125x57x116/49,5x22,5x46 88 191 1 8.527.0012 Free EVO 50BT 90 24V 1 500 800 2000-21527 44/11,63 50/13,21 125x57x116/49,5x22,5x46 142 313 1 8.525.1301 Next EVO 55BT 92 24V 1 550 800 2200-24210 55/14,52 65/17,17 142x72x123/56x28x48 133 293 1 8.525.1302 Next EVO 66BTA 92 24V 2 660 800 2640-28416 55/14,52 65/17,17 142x72x123/56x28x48 138 304 1 8.516.0406 Easy-R 50BT 94 24V 1 500 800 2250-24218 67/17,70 77/20,35 142x72x123/56x28x48 132 291 1 8.516.0407 Easy-R 55BT 94 24V 2 550 800 2475-26640 67/17,70 77/20,35 142x72x123/56x28x48 127 279 1 8.516.0415 Easy-R 66BT 94 24V 2 660 800 2970-31968 67/17,70 77/20,35 142x72x123/56x28x48 122 268 1 8.517.0105 Midi-R 75BT 96 24V 2 750 900 4275-46015 88/23,25 91/24,04 156x74x128/61x29x50 180 396 1 8.579.0001 Comfort XXS 66 98 24V 2 660 855 3250-34982 75/19,81 80/21,13 140x82x135/56x33x53 175 390 1 8.579.0002 Comfort XXS 66 98 24V 2 660 855 3250-34982 75/19,81 80/21,13 140x82x135/56x33x53 247 544 1 8.579.0011 Comfort XXS 66 98 24V 2 660 855 3250-34982 75/19,81 80/21,13 140x82x135/56x33x53 177 394 1 8.574.4001 Comfort XS-R 75 Essential 100 24V 2 750 900 3750-40364 110/29,06 130/34,34 152x97x154/59x39x61 217 478 1 8.574.4003 Comfort XS-R 85 Essential 100 24V 2 750 900 3750-40364 110/29,06 130/34,34 152x97x154/59x39x61 222 489 1 8.574.4101 Comfort XS-R 75 UP 102 24V 2 750 900 3750-40364 110/29,06 130/34,34 152x97x154/59x39x61 223 491 1 8.574.4103 Comfort XS-R 85 UP 102 24V 2 820 1000 6200-66000 110/29,06 130/34,34 152x97x154/59x39x61 229 504 1 8.575.0010 Comfort S-R 90 104 24V 2 900 1000 5740-61784 140/36,99 150/39,63 200x118x171/79x46x67 307 676 1 8.578.0004 Comfort M102 106 36V 2 1020 1250 7140-76854 200/52,84 210/55,48 200x118x171/79x46x67 386 850 1 8.572.0002 Comfort L122 108 36V 3 1220 1450 8540-91923 280/73,97 315/83,22 230x135x190/91x53x74 684 1507 1 Comfort S-R Comfort M Comfort L Comfort XS-R Comfort XXS

40. 40 High pressure cleaners MYSTIC R 1409 XP BOLT 1510 LP COLUMBIA R 1211 LP COLUMBIA R 1515 LP COLUMBIA R 2015 LP 3.700.0030 Gun 3/8” - M22 • • • 3.700.0025 Gun RL 30 3/8”M - 1/4”F (only for lance 6.602.0049 - 6.602.0050) • • • 4.618.0012 10 m H.P. Hose - 3/8" - Ø 5/16" - 310 bar • • 4.618.0056 20 m H.P. Hose - 3/8" - Ø 5/16" - 400 bar • • 4.618.0057 20 m H.P. Hose - 3/8" - Ø 3/8" - 400 bar • • 4.618.0058 10 m H.P. Hose for food industry - 3/8" - Ø 3/8" - 400 bar • • 4.618.0050 10 m H.P. Hose - 3/8" F F - Ø 3/8" R2 • • 6.602.0049 mm 1700 S. S. 1/4"M - 1/8”F high/low press. (for det. suction) for gun 3.700.0025 • • • 6.602.0050 mm 1700 S. S. 1/4”M - 1/8”F lance with nozzle-holder - for gun 3.700.0025 • • • 6.602.0040 Lance Rotox type 1 M22 - 0,45 • • 6.602.0041 Lance Rotox type 2 M22 - 0,55 • 6.602.0056 Lance Rotox M22 - 0,35 • 6.602.0060 Lance Rotox M22 - 0,30 • 6.602.0027 M22 - 0,40 Widia sand-blasting lance • • • • 6.602.0028 M22 - 0,50 Widia sand-blasting lance • 6.602.0029 M22 - 0,75 Widia sand-blasting lance 3.701.0025 Double lance mm 500 with regulator knob max 250 bar with nozzle holder • • • • 6.602.0003 Foam lance max temperature 90° C. For gun M 22 max 250 bar • • • • • 6.602.0055 Foam lance with regulator max temp. 60° C - with M22 coupling • • • • • 6.602.0053 Foam lance with regulator max temp. 60° C - M22 coupling with tank 1 lt. • • • • • 3.102.0011 Water filter 3/4» F - 3/4» M 80 microns • • • • • 0.011.0001 Calibrated sand - 6 pieces of 5 kg each • • • • • Accessories Heritage line • = suitable High-pressure cleaner Quick coupling kit hose/gun Quick coupling kit hose/gun – brass - inlet 3/8” F - outlet 3/8” M - 200 bar Code: 6.608.0003 Quick coupling kit hose/gun – inlet 3/8” F - outlet 3/8” M - 250 bar Code: 6.602.0021 Quick coupling kit hose/gun – brass - inlet 1/4” F - outlet 1/4” M - 200 bar Code: 6.608.0002

41. 41 High pressure cleaners MISSISSIPPI R 1310 XP DAKOTA R 1509 XP DAKOTA R 2007 XP DAKOTA R 1713 XP NPX 1211 XP NPX 1813 XP TEXAS R 1211 XP TEXAS R 1509 XP TEXAS R 1611 XP LKX 1310 LP LKX 1515 LP LKX 2015 LP TEKNA 1515 LP TEKNA 2015 LP TEKNA 2021 LP 3.700.0030 Gun 3/8” - M22 • • • • • • • • • • • • • • • 3.700.0025 Gun RL 30 3/8”M - 1/4”F (only for lance 6.602.0049 - 6.602.0050) • • • • • • • • • • • • • • • 4.618.0012 10 m H.P. Hose - 3/8" - Ø 5/16" - 310 bar • • • • • • • • • 4.618.0056 20 m H.P. Hose - 3/8" - Ø 5/16" - 400 bar • • • • • • • • • 4.618.0057 20 m H.P. Hose - 3/8" - Ø 3/8" - 400 bar • • • 4.618.0058 10 m H.P. Hose for food industry - 3/8" - Ø 3/8" - 400 bar • • • 4.618.0059 10 m H.P. Hose for steam - 3/8" - Ø 3/8" (MAX 135°C) • • • • • • • • • • 6.602.0049 mm 1700 S. S. 1/4"M - 1/8”F high/low press. (for det. suction) for gun 3.700.0025 • • • • • • • • • • • • • • • 6.602.0050 mm 1700 S. S. 1/4”M - 1/8”F lance with nozzle-holder - for gun 3.700.0025 • • • • • • • • • • • • • • • 6.602.0040 Lance Rotox type 1 M22 - 0,45 • • • • • • • 6.602.0041 Lance Rotox type 2 M22 - 0,55 • • 6.602.0042 Lance Rotox M22 - 0,70 • 6.602.0056 Lance Rotox M22 - 0,35 • • • 6.602.0060 Lance Rotox M22 - 0,30 • • 6.602.0027 M22 - 0,40 Widia sand-blasting lance • • • • • • • • • • 6.602.0028 M22 - 0,50 Widia sand-blasting lance • • • 6.602.0029 M22 - 0,75 Widia sand-blasting lance • 3.701.0025 Double lance mm 500 with regulator knob max 250 bar with nozzle holder • • • • • • • • • • • • • • • 6.602.0003 Foam lance max temperature 90° C. For gun M 22 max 250 bar • • • • • • • • • • • • • • • 6.602.0055 Foam lance with regulator max temp. 60° C - with M22 coupling • • • • • • • • • • • • • • • 6.602.0053 Foam lance max temp. 60° C - M22 coupling with tank 1 lt. • • • • • • • • • • • • • • • 3.102.0011 Water filter 3/4» F - 3/4» M 80 microns • • • • • • • • • • • • • • • 0.011.0001 Calibrated sand - 6 pieces of 5 kg each • • • • • • • • • • • • • • • Accessories Hot Water high-pressure cleaners • = suitable High-pressure cleaner Adapters for high pressure hoses Code: 3.100.0023 Code: 4.606.0053 Code: 4.006.0062 Code: 3.100.0043 3/8” M 3/8” M 1/4” M 3/8” M 3/8” M M 22 M 22 M 22 F

39. 39 High pressure cleaners ALASKA 1409 XP LMX 1211 XP LMX 2007 XP ARIZONA R 1209 LP ARIZONA R 1311 LP TUCSON 1211 LP TUCSON 1509 LP TUCSON 1713 LP TUCSON 2017 LP TUCSON XL 2015 LP TUCSON XL 2021 LP TUCSON XL 2515 LP 3.700.0030 Gun 3/8” - M22 coupling (only for lance 3.701.0015 - 3.708.0001) • • • • • • • • • 3.700.0025 Gun RL 30 3/8”M - 1/4”F (only for lance 6.602.0049 - 6.602.0050) • • • • • • • • • 4.618.0049 8 m H.P. Hose - 3/8" M22 - Ø 1/4" - 210 bar • • 4.618.0012 10 m H.P. Hose - 3/8" - Ø 5/16" - 310 bar • • • • • • • 4.618.0056 20 m H.P. Hose - 3/8" - Ø 5/16" - 400 bar • • • • • 4.618.0057 20 m H.P. Hose - 3/8" - Ø 3/8" - 400 bar • • • • • 4.618.0058 10 m H.P. Hose for food industry - 3/8" - Ø 3/8" - 400 bar • • • • • 4.018.0003 8 m H.P. Hose - 1/4" M22 - Ø 1/4" - 210 bar • • • 6.602.0049 mm 1700 S. S. 1/4"M - 1/8”F high/low press. (for det. suction) only for gun 3.700.0025 • • • • • • • • • 6.602.0050 mm 1700 S. S. 1/4”M - 1/8”F lance with nozzle-holder - only for gun 3.700.0025 • • • • • • • • • 6.602.0040 Lance Rotox type 1 M22 coupling - 0,45 • • • • • • 6.602.0041 Lance Rotox type 2 M22 coupling - 0,55 • 6.602.0060 Lance Rotox type M22 coupling - 0,30 • • 6.602.0056 Lance Rotox type M22 coupling - 0,35 • • 6.602.0042 Lance Rotox type M22 coupling - 0,70 • 6.602.0027 M22 coupling - 0,40 Widia sand-blasting lance • • • • • • • 6.602.0028 M22 coupling - 0,50 Widia sand-blasting lance • • 6.602.0029 M22 coupling - 0,75 Widia sand-blasting lance • 3.701.0025 Double lance mm 500 with regulator knob max 250 bar with nozzle holder • • • • • • • • • • • • 6.602.0003 Foam lance max temperature 90° C. For gun M 22 coupling max 250 bar • • • • • • • • • • • • 6.602.0055 Foam lance with regulator max temp. 60° C - with M22 coupling • • • • • • • • • • • • 6.602.0053 Foam lance with regulator max temp. 60° C - M22 coupling with tank 1 lt. • • • • • • • • • • • • 3.102.0011 Water filter 3/4» F - 3/4» M 80 microns • • • • • • • • • • • • 0.011.0001 Calibrated sand - 6 pieces of 5 kg each • • • • • • • • • • • • Accessories Vanguard line • = suitable High-pressure cleaner

47. 47 Vacuum cleaners HEPA filter High Efficiency Particulate Arrestance. Hepa filter is 99,97% efficient until 0,3 micron impurities. Multipurpose washable filter It combines all the advantages of the cartridge filter but with the plus that it can vacuum both dry and wet at the same time. It can be washed with tap water. Filter shaker It clears filter from dust without touching it or opening the vacuum cleaner; the vacuum efficiency is kept at max. Foam system: the machine is equipped with connection for compressed air and pressure gauge for foam cleaning. Using the lance with the hose a thick foam can be produced that will stay on the dirty components, giving more effectiveness to the detergent. Number of motors: It explains how many motors there are in the vacuum cleaner. Ignition is independent in order to increase progressively the performances. The working system (whenever it is more than one) is in parallel, so the air suction increases and the depressure is steady whenever the motors are progressively switched on. Anti electrostatic current device Dust rubbing at high speed against vacuum cleaner walls creates a magnetic field that neutralizes on the user with small and annoying discharges also through plastic material. This certified system removes this phenomenon on the machine, granting best comfort and safety for the user. Paper collector filter Allows filtering and collection (with a valve) of rough dirt without dirty the tank whenever it is time to replace it. It is useful for dry waste, also in combination of other thinner filters. Cloth filter The cloth consistency and its shape allow a simple cleaning phase and the re- usage of the filter. It can be used only for vacuuming dry waste; if combined with nylon filter it is possible to work for a longer period of time. Cartridge filter The continuous folders arranged in circle allow a higher filtering surface in a smaller area. More cleaning autonomy with a thin filtering action. It can be used only for vacuuming dry waste and it is re-usable. Dry vacuum cleaners/wet & dry vacuum cleaners and Injection extraction 665/2013 - II B 30.5 A B C DEFG AB CD E F G AB C D EFG 76 dB kWh/annum SILENT/ECHO/SP112D • The energy rating Based pri marily on energy consumption, with a penalty for low pick-up The amount of energy the vacuum will use over the course of a year. • Annual energy usage The noise level produced by the machine in decibels. • Noise The amount of dust in air emitted from the machine’s exhaust. • Emissions The rating of how much dust the machine picks up from hard floors and crevices. • Pick-up Hard floors/crevices The rating of how much dust the machine picks up from carpets. • Pick-up - Carpets

Dilihat

  • 395 Total Views
  • 297 Website Views
  • 98 Embeded Views

Tindakan

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Embeds 3

  • 5 sentral.indoteknik.com
  • 19 indoteknikcom.odoo.com
  • 1 www.google.com