Nikko Steel Kawat Las Elektroda For Ferritic, Austenitic and Duplex Stainless Steels NSB-310Mo

Brosur & Katalog Produk / Brosur & Katalog Produk

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

Post comment with email address (confirmation of email is required in order to publish comment on website) or please login to post comment

1. MANUFACTURERS OF A DIVERSE RANGE OF ADVANCED WELDING CONSUMABLES SECTION 6 NSB-310Mo FOR WELDING FULLY AUSTENITIC STAINLESS STEELS CONTAINING A NOMINAL 25Cr-20Ni-2.5Mo DATA SHEET NO. 69 SPECIFICATION AWS A5.4 JIS Z 3221 CLASSIFICATION E310Mo-16 D310Mo-16 PRODUCT DESCRIPTION A unique rutile based flux formulated with very low levels of acid and amphoteric minerals combined with small alloy additions to compensate for arc losses. The flux is concentrically extruded onto a fully alloyed core wire and bound by a blend of silicates that assures both coating strength and resistance to subsequent moisture absorption. WELDING FEATURES OF THE ELECTRODE The electrode is used to best advantage on DC+ but is also stable on AC. Weld beads are smooth and slag detachability is good. Because weld metal silicon is low by design to reduce solidification cracking (a feature common to all ferrite free austenitic alloys), the wel d profile is more u-convex than normal. APPLICATIONS AND MATERIALS TO BE WELDED Applications for the electrode are found in the Chemical and Petro-Chemical Industries for welding similarly alloyed heat resisting castings or 316L clad plate. The electrode may also be used to deposit overlays on carbon steels. WELD METAL ANALYSIS COMPOSITION % BY Wt. C Cr Ni Mo Mn Si P S Cu Fe MIN - 25 20 2.0 1.0 - - - - MAX 0.12 28 22 3.0 2.5 0.75 0.03 0.03 0.75 TYPICAL 0.06 27.4 21.9 2.9 2.0 0.33 0.025 0.001 0.12 Bal. WELD METAL PROPERTIES (ALL WELD METAL) PROPERTY UNITS MINIMUM TYPICAL OTHERS Tensile strength N/mm 2 550 620 0.2% Proof stress N/mm 2 - 400 H.V. 220 Elongation on 4d % 30 42 Reduction of Area (RA) % - 52 Impact energy 20 o C J - 100 WELDING AMPERAGE AC or DC+ Ø (mm) 2.0 2.6 3.2 4.0 5.0 MIN 35 65 80 120 160 MAX 80 100 125 170 210 OTHER DATA Electrodes that have become damp should be re-dried at 150 o C for 1 hour. RELATED PRODUCTS Please contact our Technical Department for detail. WI-0304 DS69 NSB-310Mo Rev. 0, Date 01.09.2008

Dilihat

  • 92 Total Views
  • 61 Website Views
  • 31 Embeded Views

Tindakan

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Embeds 2

  • 1 sentral.indoteknik.com
  • 14 indoteknikcom.odoo.com