Nikko Steel Kawat Las Elektroda For Hardfacing and Resurfacing - Build up HV-350

Brosur & Katalog Produk / Brosur & Katalog Produk

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

Post comment with email address (confirmation of email is required in order to publish comment on website) or please login to post comment

1. MANUFACTURERS OF A DIVERSE RANGE OF ADVANCED WELDING CONSUMABLES SECTION 9 HV-350 RUTILE - LOW ALLOY - HIGH EFFICIENCY HARDFACING ELECTRODE WITH EXCELLENT RESISTANCE TO IMPACT LOADING COMBINED WITH MEDIUM ABRASION RESISTANCE DATA SHEET NO. 111 SPECIFICATION DIN 8555 JIS Z 3251 CLASSIFICATION E1-UM-350-GP DF2A-350R PRODUCT DESCRIPTION The design emphasis of the alloyed weld metal ensures the desired hardness level of the specification is readily achieved as is the deposits maximum resistance to impact loading combined with medium resistance to abrasion. The flux contains the appropriate alloying elements plus iron powder addition and is extruded onto a ferritic wire with a balance of silicates that ensures both coating strength and resistance to moisture absorption. WELDING FEATURES OF THE ELECTRODE The electrode is suitable for both AC and DC and is used to best advantage in the flat and HF positions. The arc is smooth and stable weld beads are evenly rippled, of bright appearance and the slag readily detachable. The weld deposit is highly crack resistant under normal circumstances, but on high carbon cast steels or restrained sections of mild steel, a pre-heat of 150 ° C should be used. APPLICATIONS AND MATERIALS TO BE WELDED The main applications occur when intermetalic abrasion is involved, eg: to control wear in interconnecting steel components such as gear wheels, shafts, sprockets, couplings etc. The deposit is machinable thus enabling worn or broken sections to be rebuilt and then reshaped. Similarly the repaired component may be oil quenched to increase hardness or may be case hardened by conventional practices. WELD METAL ANALYSIS COMPOSITION % BY Wt. C Mn Si S P Cr Mo V W Fe MIN 0.2 0.4 - - - 1.0 0.1 - - MAX 0.3 1.2 0.8 0.03 0.03 2.0 0.3 - - TYPICAL 0.25 0.5 0.6 0.02 0.02 1.2 0.2 0.02 0.007 Bal. WELD METAL HARDNESS (ALL WELD METAL) AS WELDED 150 0 C PRE-HEAT HRC HV 1 st Layer 24 260 QUENCHED 850 0 C TEMPERED 650 0 C HV 2 nd Layer 32 320 HV 3 rd Layer 39 380 300 – 500 290 – 310 Heat input, cooling rate, and dilution will affect hardness in the first two layers but no significant affect in next layers WELDING AMPERAGE AC or DC+ Ø mm 2.6 3.2 4.0 5.0 MIN 60 90 140 190 MAX 90 140 180 240 OTHER DATA Electrodes that have become damp should be re-dried at 150 o C for 1 hour. RELATED PRODUCTS Please contact our Technical Department for detail. WI-0304 DS111 HV-350 Rev. 1, Date 01.01.2011


  • 245 Total Views
  • 159 Website Views
  • 86 Embeded Views


  • 0 Social Shares
  • 0 Dislikes

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Embeds 3

  • 6
  • 21
  • 1