Nikko Steel Kawat Las Elektroda For Hardfacing and Resurfacing - Build up HV-450

Brosur & Katalog Produk / Brosur & Katalog Produk

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

Post comment with email address (confirmation of email is required in order to publish comment on website) or please login to post comment

1. MANUFACTURERS OF A DIVERSE RANGE OF ADVANCED WELDING CONSUMABLES SECTION 9 HV-450 RUTILE - LOW ALLOY - HIGH EFFICIENCY HARDFACING ELECTRODE WITH EXCELLENT RESISTANCE TO IMPACT LOADING COMBINED WITH MEDIUM ABRASION RESISTANCE DATA SHEET NO. 113 SPECIFICATION AWS A5.13 DIN 8555 JIS Z 3251 CLASSIFICATION EFe2 E1-UM-45-GP DF2A – 450-R PRODUCT DESCRIPTION The design emphasis of the alloyed weld metal ensures the desired hardness level to the specification is readily achieved as is the deposits maximum resistance to impact loading combined with medium resistance to abrasion. The flux contains the appropriate alloying elements plus iron powder addition and is extruded onto a ferritic wire with a balance of silicates that ensures both coating strength and resistance to moisture absorption. WELDING FEATURES OF THE ELECTRODE The electrode is suitable for both AC and DC and is used to best advantage in the flat and HV positions. The arc is smooth and stable weld beads are evenly rippled, of bright appearance and the slag readily detachable. The weld deposit is highly crack resistant under normal circumstances, but on high carbon cast steels or restrained sections of mild steel, a pre-heat of 150 ° C should be used. APPLICATIONS AND MATERIALS TO BE WELDED The tough crack resistant weld deposit may be used as a buffer layer both on mild and high carbon steels prior to depositing harder alloys. Used in its own right, it provides an excellent combination of abrasion and impact resistance making it ideal for hardfacing gear wheels, rails, roller guides, slideways, track wheels, sprockets and similar. Machining is not possible but may be profile ground. WELD METAL ANALYSIS COMPOSITION % BY Wt. C Mn Si S P Cr V Mo Fe MIN 0.1 0.5 - - - 2.0 - 0.5 MAX 0.3 1.2 0.8 0.03 0.03 3.0 0.3 0.8 TYPICAL 0.25 0.75 0.5 0.02 0.02 2.1 0.2 0.6 Bal. WELD METAL HARDNESS (ALL WELD METAL) AS WELDED 150 0 C PRE-HEAT HRC HV 1 st Layer 35 350 2 nd Layer 43 420 3 rd Layer 47 465 Heat input, cooling rate, and dilution will affect hardness in the first two layers but no significant affect in next layers WELDING AMPERAGE AC or DC+ Ø (mm) 2.6 3.2 4.0 5.0 MIN 65 90 140 190 MAX 90 130 180 240 OTHER DATA Electrodes that have become damp should be re-dried at 150 o C for 1 hour. RELATED PRODUCTS Please contact our Technical Department for detail. WI-0304 DS113 HV-450, Rev. 2, Date 01.01.2011

Dilihat

  • 77 Total Views
  • 54 Website Views
  • 23 Embeded Views

Tindakan

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Embeds 2

  • 2 sentral.indoteknik.com
  • 7 indoteknikcom.odoo.com