Nikko Steel Kawat Las Elektroda For Maintenance Welding NIK 100

Brosur & Katalog Produk / Brosur & Katalog Produk

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

Post comment with email address (confirmation of email is required in order to publish comment on website) or please login to post comment

1. MANUFACTURERS OF A DIVERSE RANGE OF ADVANCED WELDING CONSUMABLES SECTION 10 NIK 100 PURE NICKEL ELECTRODE FOR FULLY MACHINABLE, CRACK- RESISTING WELDS ON ALL GRADES OF CAST IRON DATA SHEET NO. 144 SPECIFICATION AWS A5.15 EN ISO 1071 JIS Z 3252 CLASSIFICATION ENi-CI E CNi-C13 DFC Ni PRODUCT DESCRIPTION The design emphasis of the chemically basic flux assures the metallurgical integrity of the weld metal. The high graphite content of the flux is expelled from the molten metal, compensating for the compression welding stresses thus preventing weld metal cracking. The core wire is pure nickel. WELDING FEATURES OF THE ELECTRODE The arc is stable both AC and DC, but is very soft, thus minimising dilution. Weld beads are smooth, bright and evenly rippled. The slag is fairly fluid but relatively quick freezing, thus allowing smooth blends when edges are involved. The slag is readily controlable, thus making positional welding very easy, plus the slag is easily detachable. APPLICATIONS AND MATERIALS TO BE WELDED Successful welding of cast irons is dependant on low strength weld metal and controlled heat input welding procedures. Both characteristics are assured by the use of NIK 100. NIK 100 may be used for all standard grades of grey cast iron and malleable cast irons. Typical applications include repairs to engine blocks and heads, gear housings, machine bases, as well as repairs to used castings. Is also used to rectify casting defects on new castings. WELD METAL ANALYSIS COMPOSITION % BY Wt. C Mn Si S P Fe Ni Cu Others MIN - - - - - - 85 - - MAX 2.0 2.5 4.0 0.03 - 8.0 - 2.5 1.0 TYPICAL 1.0 0.1 0.2 0.001 0.003 0.5 Bal. 0.03 0.05 WELD METAL PROPERTIES (ALL WELD METAL) PROPERTY UNITS MINIMUM TYPICAL OTHERS Tensile strength N/mm 2 - 275 0.2% Proof stress N/mm 2 - - Elongation on 4d % - 8 HV 140 - 160 Reduction of Area (RA) % - - WELDING AMPERAGE AC or DC Ø (mm) 2.6 3.2 4.0 MIN 60 80 110 MAX 100 120 140 OTHER DATA Electrodes that have become damp should be re-dried at 110 o C for 1 hour. RELATED PRODUCTS Please contact our Technical Department for detail. WI-0304 DS144 NIK 100, Rev. 2, Date 01.08.2012

Dilihat

  • 168 Total Views
  • 110 Website Views
  • 58 Embeded Views

Tindakan

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Embeds 2

  • 4 sentral.indoteknik.com
  • 11 indoteknikcom.odoo.com