Nikko Steel Kawat Las Elektroda For Maintenance Welding NSP

Brosur & Katalog Produk / Brosur & Katalog Produk

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

Post comment with email address (confirmation of email is required in order to publish comment on website) or please login to post comment

1. MANUFACTURERS OF A DIVERSE RANGE OF ADVANCED WELDING CONSUMABLES SECTION 10 NSP FLUX COATED MMA ELECTRODE FOR CUTTING ALL METALS FERROUS AND NON-FERROUS DATA SHEET NO. 154 SPECIFICATION CLASSIFICATION NO NATIONAL SPECIFICATION PRODUCT DESCRIPTION A high iron oxide flux, very low in conventional minerals that produces a highly oxidising gas plasma around the arc initiated by the core wire. The flux is extruded onto the core wire using special silicates to maintain coating strength during electrode usage. CUTTING FEATURES OF THE ELECTRODE The electrode functions AC and DC producing a strong arc accompanied by a highly oxidizing gas plasma. It is necessary to start cutting action at the edge of plate. Once started the metal is cut by an oxidizing action and the gravitational removal of the molten or cooling resultant oxides. APPLICATIONS AND MATERIALS TO BE CUT Cutting all metals without specialised equipment up to 15mm thick. Particularly useful on site. No slag remains, only sintered iron oxide particles which are only lightly attached, not fused, to the plate surface. The cut edges and sub-surface do not suffer any carbon pick-up and after light mechanical dressing are of very acceptable appearance. SLAG No slag in the conventional use of the word exists, only sintered metal oxides lightly attached to the plate surface. APPEARANCE OF CUT EDGES The cut is perpendicular to the plate su rface. The cut surface has the appearance of an cut with some incipient surface melting. On high carbon steels, a small sub-surface hardening may have occurred, but only light grinding is needed to remove it. WELDING AMPERAGE AC or DC+ Ø (mm) 3.2 4.0 5.0 MIN 150 230 290 MAX 200 270 330 OTHER DATA Electrodes that have become damp should be re-dried at 110 o C for 1 hour. WI-0304 DS153 NSP, Rev. 0, Date 01.09.2008

Dilihat

  • 181 Total Views
  • 107 Website Views
  • 74 Embeded Views

Tindakan

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Embeds 2

  • 4 sentral.indoteknik.com
  • 6 indoteknikcom.odoo.com