Nikko Steel Kawat Las Elektroda For Superaustenitic Alloys and Modified Austenitics NS-18.15.3 LMnR

Brosur & Katalog Produk / Brosur & Katalog Produk

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

Post comment with email address (confirmation of email is required in order to publish comment on website) or please login to post comment

1. MANUFACTURERS OF A DIVERSE RANGE OF ADVANCED WELDING CONSUMABLES SECTION 8 NS-18.15.3 LMnR RUTILE FLUX COATED ELECTRODE WITH VERY LOW LEVELS OF SILICIOUS MINERALS THAT DEPOSITS A FERRITE-FREE AUSTENITIC WELD METAL DATA SHEET NO. 99 SPECIFICATION BS EN 1600 CLASSIFICATION E 18 15 3 L R PRODUCT DESCRIPTION Manufactured on a near matching alloy core wire, the rutile low silicious flux has a significant level of chemically basic chemicals that ensures a high purity weld metal with a refined microstructure. The flux is extruded on to the core wire using a blend of silicates that ensures both coating strength and a coating resistant to subsequent moisture absorption . WELDING FEATURES OF THE ELECTRODE The electrode performs best on DC+ but may be used AC. The arc is stable but should be used with a short arc technique rather than contact welding. The medium viscous slag is readily detachable even in deep V's. Vertical up welding is possible with 3.2mm diameter electrodes. Fillet welds have a convex profile. APPLICATIONS AND MATERIALS TO BE WELDED For welding stainless steels when totally non-magnetic weld metal is required (mainly military applications). Also for welding: Stainless steels when good toughness is required down to and lower than -196 º C. Modified 316L stainless steel as it has excellent resistance to corrosion against concentrated nitric acids and may be used to clad C-Mn steels to provide corrosion resistant overlays. WELD METAL ANALYSIS COMPOSITION % BY Wt. C Mn Si S P Cr Ni Mo N MIN - 1.0 - - - 16.5 14 2.5 0.10 MAX 0.04 4.0 1.2 0.025 0.03 19.5 17 3.5 0.20 TYPICAL 0.02 3.0 0.4 0.01 0.02 17.5 16 3.0 0.15 WELD METAL PROPERTIES (ALL WELD METAL) PROPERTY UNITS MINIMUM TYPICAL OTHERS Tensile strength N/mm 2 480 620 0.2% Proof stress N/mm 2 - 430 Elongation on 4d % - 35 Reduction of Area (RA) % - 50 Impact energy -196 o C J - 65 LATERAL EXPANSION AT -196ºC 0.75 mm WELDING AMPERAGE AC or DC+ Ø (mm) 2.6 3.2 4.0 5.0 MIN 60 75 100 140 MAX 90 120 160 220 OTHER DATA Electrodes that have become damp should be re-dried at 180 o C for 1 hour. RELATED PRODUCTS Please contact our Technical Department for detail. WI-0304 DS94 NS-18.15.3 LMnR Rev. 0, Date 01.09.2008

Dilihat

  • 116 Total Views
  • 79 Website Views
  • 37 Embeded Views

Tindakan

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Embeds 2

  • 3 indoteknikcom.odoo.com
  • 3 sentral.indoteknik.com